MOJ 130 Ohm 5W Wirewound Ceramic Resistor P12190949MOJ-Y35WW884 https://cdnimages.opentip.com/full/MOJ/MOJ-Y35WW884.jpg 130 Ohm 5W Wirewound Ceramic Resistor DESCRIPTIONProduct DetailsWirewound ResistorsWirewound resistors are commonly made by winding a metal wire, usually nichrome, around a ceramic, plastic, or fiberglass core. The ends of the wire are soldered or welded to two caps or rings, attached to the ends of the core. The assembly is protected with a layer of paint, molded plastic, or an enamel coating baked at high temperature. These resistors are designed to withstand unusually high temperatures of up to 450 °C. Wire leads in low power wirewound resistors are usually between 0.6 and 0.8 mm in diameter and tinned for ease of soldering. For higher power wirewound resistors, either a ceramic outer case or an aluminum outer case on top of an insulating layer is used - if the outer case is ceramic, such resistors are sometimes described as \"cement\" resistors, though they do not actually contain any traditional cement. The aluminum-cased types are designed to be attached to a heat sink to dissipate the heat; the rated power is dependent on being used with a suitable heat sink, e.g., a 50 W power rated resistor will overheat at a fraction of the power dissipation if not used with a heat sink. Large wirewound resistors may be rated for 1,000 watts or more.Because wirewound resistors are coils they have more undesirable inductance than other types of resistor, although winding the wire in sections with alternately reversed direction can minimize inductance. Other techniques employ bifilar winding, or a flat thin former (to reduce cross-section area of the coil). For the most demanding circuits, resistors with Ayrton-Perry winding are used.Applications of wirewound resistors are similar to those of composition resistors with the exception of the high frequency. The high frequency response of wirewound resistors is substantially worse than that of a composition resistor. 12190949 0.0100lbs 0.00 0.00 0.00

Mojotone

0.67 2025-11-19 440 In Stock 130 Ohm 5W Wirewound Ceramic Resistor

130 Ohm 5W Wirewound Ceramic Resistor

Brand Mojotone

Shop more from MOJ

* Click "Add to Cart" to calculate shipping and delivery time.

Share & Earn 10% Cash Back Best Price in Bulk

Best Price in Bulk!

Because we are a major distributor for some products, we price very aggressively by sacrificing profit margin whenever we sell in bulk. The philosophy to offer quality products with little mark up has created unmatched customer loyalty for some successful membership based stores. Unlike those wholesale to public membership clubs, we do not charge any membership fee. Some merchants offer FREE shipping, but when you buy quantity 10, you pay 10 times total. Essentially, you are paying 10 times on shipping. We don't think that is fair to you. Why? Most of the time, shipping a 10 lb parcel does not cost 10 times of a 1 lb parcel.

Here is an example:

Opentip	Others
Product Price: $8	Product Price: $20
Shipping for quantity 1: $12	Shipping: FREE
Quantity: 10	Quantity: 10
Total Shipping for quantity 10: $18	Total Shipping: FREE
Subtotal: $98 Saving: $102 (51%)	Subtotal: $200

Don't be shy. If you discover any competitor outselling us in a particular product, whenever you purchase in large quantity, please bring it to our attention. Most of the time, we will match or beat their price, and give you a credit. If we lose to a competitor, it is our shame. We then know we need to work harder in sourcing to create values for you.

* Price comparison must be based on comparable brands or models and in bulk quantity purchase.

* Price: $0.67 ea X 1 qty = $0.67

Quantity	Price	Save
1+	$0.67	0%
10+	$0.64	4%
20+	$0.61	9%
100+	$0.58	13%

* This item is excluded from use of other offer, discount or coupon.

Optional related products

1.5K 5W Wirewound Ceramic Resistor

$0.58

100 OHM 5W Ceramic Resistor

$0.58

120 OHM 5W Ceramic Resistor

$0.58

62 OHM 5W Ceramic Resistor

$0.58

470 OHM 10W Ohmite Wirewound Resistor

$3.90

820 Ohm 1W 5% Carbon Film Resistor

$1.15

270K OHM 2W 5% Carbon Comp Resistor

$2.59

91k 1W 5% Carbon Film Resistor

$1.15

82k 1W 5% Carbon Film Resistor

$1.15

68k 1W 5% Carbon Film Resistor

$1.15

8.2k 1W 5% Carbon Film Resistor

$1.15

56k 1W 5% Carbon Film Resistor

$1.15

91k 1/2W Carbon Comp NOS Resistor

$1.04

9.1k 1/2W Carbon Comp NOS Resistor

$1.04

Product Description

DESCRIPTION

Product Details

Wirewound Resistors
Wirewound resistors are commonly made by winding a metal wire, usually nichrome, around a ceramic, plastic, or fiberglass core. The ends of the wire are soldered or welded to two caps or rings, attached to the ends of the core. The assembly is protected with a layer of paint, molded plastic, or an enamel coating baked at high temperature. These resistors are designed to withstand unusually high temperatures of up to 450 °C. Wire leads in low power wirewound resistors are usually between 0.6 and 0.8 mm in diameter and tinned for ease of soldering. For higher power wirewound resistors, either a ceramic outer case or an aluminum outer case on top of an insulating layer is used - if the outer case is ceramic, such resistors are sometimes described as "cement" resistors, though they do not actually contain any traditional cement. The aluminum-cased types are designed to be attached to a heat sink to dissipate the heat; the rated power is dependent on being used with a suitable heat sink, e.g., a 50 W power rated resistor will overheat at a fraction of the power dissipation if not used with a heat sink. Large wirewound resistors may be rated for 1,000 watts or more.

Because wirewound resistors are coils they have more undesirable inductance than other types of resistor, although winding the wire in sections with alternately reversed direction can minimize inductance. Other techniques employ bifilar winding, or a flat thin former (to reduce cross-section area of the coil). For the most demanding circuits, resistors with Ayrton-Perry winding are used.

Applications of wirewound resistors are similar to those of composition resistors with the exception of the high frequency. The high frequency response of wirewound resistors is substantially worse than that of a composition resistor.

Attention CA Residents: Prop 65 Warning

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

All MOJ- items are non-returnable.

Need more information?
Our staff are available to answer any questions you may have about this item

Request More Information

Customer Reviews

0 reviews

Be the first to review this item!

Write a Review