Advantages of Holland's Premium Design Lower Insertion Loss The G-F81 series has approximately 1/3 the insertion loss of standard splices at higher frequencies.(Savings of over .5 dB at 2 GHz). Higher Frequency Operation The internal air dielectric in combination with the symmetrically round pin provide superior matchingover wide frequencies between DC and 3 GHz. Higher Return LossWith a return loss of over 35 dB @1 GHz, as compared to 13 dB for standard splices, the G-F81 canassure a higher match resulting in faster digital speeds. The G-F81 series exceeds current SCTE minimumRL levels of 20 dB. | |
Flat Port EndsThe G-F81F series uses a patented method to provide flat ports ends on both sides meeting the SCTEspecifications of flatness and aperture. Patent # 6,113,431. Round, Multi-Point Seizing Pin The patented multi-point seizing pin provides a larger contact area than standard, dual flat pin splices.This results in lower contact resistance and thus higher current handling capability when needed, as wellas a greater resistance to long term center conductor oxidation. The patented design also creates a mildwiping action which removes a few microns of oxidation upon insertion. Beryllium Copper Seizing Pin The use of the more expensive beryllium copper material for the center conductor seizing pins insures agreater holding force than the traditional phosphor bronze or copper pins used in standard splices. Theadvanced material also maintains a higher spring tension over repetitive insertions. Accepts a Wider Range of Cable Center Conductors Due to the greater elastic capability of beryllium copper, the G-F81 series can accept a wider variation incable center conductor sizes and maintains its high strength on the smallest cables even after repetitiveinsertions of the largest cables. Patented, 7-year Field Proven Design |
Attention CA Residents: Prop 65 Warning