skip to footer block
ABT ABS Import Tools JT2 DRILL CHUCK REMOVAL WEDGE SET 3700 0401 P11117315ABT-3700-0401 https://cdnimages.opentip.com/full/ABT/ABT-3700-0401.jpg ABS Import Tools JT2 DRILL CHUCK REMOVAL WEDGE SET 3700 0401 Manufacturer part number: 3700-0401JT2 Drill Chuck Removal Wedge Set2 piece set.For removing taper mount chucks from arbors or spindles. 11117315 0.3500lbs 0.00 0.00 0.00
ABS Import Tools
11.0400 2025-07-17 Out of Stock
customer review - by , September 9, 2023
5/ 5stars
Buy these instead of trying to improvise and possibly hurting yourself.
customer review - by , April 4, 2023
5/ 5stars
Almost too easy. I didn't use a hammer or mallet for this. Instead I used a clamp and as I slowly tightened the clamp against the wedges the chuck simply dropped into a small box filled with rags to cushion the fall. Made me feel like I cheated or something. This worked so well I wanted to do it again..
customer review - by , April 4, 2023
5/ 5stars
Almost to easy. I didn't use a hammer or mallet for this. Instead I used a clamp and as I slowly tightened the clamp against the wedges the chuck simply dropped into a small box filled with rags to cushion the fall. Made me feel like I cheated or something. This worked so well I wanted to do it again..
customer review - by , May 5, 2022
5/ 5stars
This worked for removing a drill press chuck with JT33 taper (Jacobs). I mounted the old one with red loctite (too string, never again). A little heat and the correct wedges did the job.
customer review - by , May 5, 2022
5/ 5stars
This worked for removing a drill press chuck with JT33 taper (Jacobs). I mounted the old one with red loctite (too string, never again). A little heat and the correct wedges did the job.
customer review - by , May 5, 2022
5/ 5stars
I don't have much to say, except they removed my chuck from the adapter just fine. Well made.
customer review - by , May 5, 2022
5/ 5stars
I had a chuck that I wanted to move from an R-8 arbor to a TTS arbor. These worked perfectly and quickly.
customer review - by , April 4, 2022
5/ 5stars
I see the poor reviews for this product, but from what I can gather in their reviews they are trying to slip one of these wedges over a groove they see on their chuck shaft and then pry with them. You do not use these wedges to pry anything and the groove you are seeing on the shaft is not where these fit.You take each of the wedges and drive them from opposite sides TOGETHER. They should form an even surface between the chuck and the drill press. You are using these wedges as a pair to form an even lift. Tapping them TOGETHER from each side will spread them farther apart and release the chuck easily from the shaft. There is is no prying going on. You are not trying to slip them on the shaft slot in the center.
customer review - by , March 3, 2022
5/ 5stars
Best way to remove a chuck properly from a tapered shaft. Pickle forks are often too thick. Two small hammers or some large channellocks and these wedges will pop off a chuck easily and without strain on bearings. These are good steel with a glossy black oxide finish. Correct size for a JT33 and some others. If you're ever in doubt, look up a taper dimension chart (Travers Tool and several other online hosts for this). Genuine Jacobs, part 13269 (ordered from ATK Industrial).Quick measurements:Overall width: 1.257Overall length: 2.004Inside width: 0.740Inside length to bottom of arc: 1.502Base thickness: 0.167Tip thickness: /- 0.060
customer review - by , March 3, 2022
5/ 5stars
Tool repair
  »  
  »  
  »  
  »  
  »  

ABS Import Tools JT2 DRILL CHUCK REMOVAL WEDGE SET (3700-0401)

stars Rating 5 | 23 reviews
Brand ABS Import Tools
Shop more from ABT
SKU: ABT-3700-0401
Price: $11.04
Quantity:
Shipping:
$15.99 To [ 43215 ] Estimated Delivery Date: Jul 24, 2024 to Jul 26, 2024
Out of Stock
*  Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer part number: 3700-0401

  • JT2 Drill Chuck Removal Wedge Set
  • 2 piece set.
  • For removing taper mount chucks from arbors or spindles.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
5 out of 5
see all 23 reviews
5 stars
22
4 stars
1
3 stars
0
2 stars
0
1 stars
0
Write a Review
By D. Trelford
Date: September 10, 2023
Buy these instead of trying to improvise and possibly hurting yourself.
Rating: 5 stars [5 of 5 Stars!]
By Claremont Guy
Date: April 28, 2023
Almost too easy. I didn't use a hammer or mallet for this. Instead I used a clamp and as I slowly tightened the clamp against the wedges the chuck simply dropped into a small box filled with rags to cushion the fall. Made me feel like I cheated or something. This worked so well I wanted to do it again..
Rating: 5 stars [5 of 5 Stars!]
By D. Trelford
Date: April 28, 2023
Almost to easy. I didn't use a hammer or mallet for this. Instead I used a clamp and as I slowly tightened the clamp against the wedges the chuck simply dropped into a small box filled with rags to cushion the fall. Made me feel like I cheated or something. This worked so well I wanted to do it again..
Rating: 5 stars [5 of 5 Stars!]
By R. Nielsen
Date: May 24, 2022
This worked for removing a drill press chuck with JT33 taper (Jacobs). I mounted the old one with red loctite (too string, never again). A little heat and the correct wedges did the job.
Rating: 5 stars [5 of 5 Stars!]
By Claremont Guy
Date: May 24, 2022
This worked for removing a drill press chuck with JT33 taper (Jacobs). I mounted the old one with red loctite (too string, never again). A little heat and the correct wedges did the job.
Rating: 5 stars [5 of 5 Stars!]
By Bob Summers
Date: May 01, 2022
I don't have much to say, except they removed my chuck from the adapter just fine. Well made.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 23 reviews
 1  2  3  4  [Next]