skip to footer block
ABT ABS Import Tools THREADED M39 X 4 BACKPLATE / ADAPTER FOR 6" 3 OR 4 JAW LATHE CHUCKS 3900 3339 P5287637ABT-3900-3339 https://cdnimages.opentip.com/full/ABT/ABT-3900-3339.jpg ABS Import Tools THREADED M39 X 4 BACKPLATE / ADAPTER FOR 6" 3 OR 4 JAW LATHE CHUCKS 3900 3339 Manufacturer part number: 3900-3339Threaded M39 X 4 Backplate/Adapter 6\" Lathe ChucksNo bolt holes.Machining is required before mounting your chuck to ensure concentricity.For 3 & 4-jaw chucks. 5287637 6.2000lbs 0.00 0.00 0.00
ABS Import Tools
71.5200 2025-07-13 31 In Stock
customer review - by , July 7, 2022
5/ 5stars
The jaws move independently, this is false advertising.
customer review - by , June 6, 2022
5/ 5stars
Ordered this for different mini lathe this one does not fit the second late I had to order it is a four screw mounting spindle and the new one has a three screw mounting spindle. ! ?
customer review - by , June 6, 2022
4/ 5stars
quick and easy to use
customer review - by , June 6, 2022
4/ 5stars
Overall a decent deal for the money. Took some filing and cleanup to get it working smoothly, but that is expected of these import chucks. The biggest welcome surprise was that the chuck fit my MX210V perfectly - apart from having a four bolt pattern where this lathe has a three bolt pattern. No backplate needed - I just lined up one of the holes with a stud from my 3 jaw chuck and used a transfer punch to set the location for the other two holes. Drilled and tapped some M8 holes about 3/4 deep and it connected just great!
customer review - by , June 6, 2022
4/ 5stars
customer review - by , May 5, 2022
4/ 5stars
This chuck fits the MX-210V lathe without modification. I has four mounting holes versus the three mounting holes on the chuck included with the lathe, so three new holes heed to be added to the chuck face plate to hold it, then good to go. This chuck has individually adjustable jaws to allow mounting of non-round work pieces, which greatly increases the versatility of your lathe.
customer review - by , April 4, 2022
5/ 5stars
Item was better than expected. Excellent quality and price.
customer review - by , November 11, 2021
5/ 5stars
Seems well made and easy to dial in. Had to deburr the edges of the jaws just a bit to get them to slide smoothly, but no big deal. Happy with the value of this.
customer review - by , March 3, 2021
5/ 5stars
This is a Great chuck for the 7x mini lathe. Need to have an adapter plate to use it.This chuck is well built and quality seen good.It is an independent chuck and not a self centering chuck and requires a little chucking skill.Over all it a A.
customer review - by , February 2, 2021
5/ 5stars
Surprisingly good quality chuck. Solid and well made. I machined a cast iron backplate for it and installed it on my 9 x 20 lathe. (I think it is the perfect size for this lathe; imho a six inch chuck would be too big.) The jaws seemed a bit sticky at first but this was solved by a thorough cleaning. The only negative was the number of sharp edges on the jaws and chuck face, but again this was easily fixed. I chucked up a back gear housing and adjusted center to within 0.0005, (the limit of my DTI), so it works well for me. I would buy it again.

ABS Import Tools THREADED M39 X 4 BACKPLATE / ADAPTER FOR 6" 3 OR 4 JAW LATHE CHUCKS (3900-3339)

stars Rating 5 | 15 reviews
Shop more from ABT

SKU: ABT-3900-3339
Price: $71.52
Quantity:
Shipping:
$20.69 To [ 43215 ] Estimated Delivery Date: Jul 19, 2024 to Jul 23, 2024
31 In Stock
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer part number: 3900-3339

  • Threaded M39 X 4 Backplate/Adapter 6" Lathe Chucks
  • No bolt holes.
  • Machining is required before mounting your chuck to ensure concentricity.
  • For 3 & 4-jaw chucks.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
5 stars
9
4 stars
6
3 stars
0
2 stars
0
1 stars
0
By Greg
Date: July 24, 2022
The jaws move independently, this is false advertising.
Rating: 5 stars [5 of 5 Stars!]
By Fred Riffle
Date: June 28, 2022
Ordered this for different mini lathe this one does not fit the second late I had to order it is a four screw mounting spindle and the new one has a three screw mounting spindle. ! ?
Rating: 5 stars [5 of 5 Stars!]
By M
Date: June 23, 2022
quick and easy to use
Rating: 4 stars [4 of 5 Stars!]
By Tom Kennedy
Date: June 18, 2022
Overall a decent deal for the money. Took some filing and cleanup to get it working smoothly, but that is expected of these import chucks. The biggest welcome surprise was that the chuck fit my MX210V perfectly - apart from having a four bolt pattern where this lathe has a three bolt pattern. No backplate needed - I just lined up one of the holes with a stud from my 3 jaw chuck and used a transfer punch to set the location for the other two holes. Drilled and tapped some M8 holes about 3/4 deep and it connected just great!
Rating: 4 stars [4 of 5 Stars!]
By Travis Bailey
Date: June 06, 2022
Rating: 4 stars [4 of 5 Stars!]
By Barb
Date: May 29, 2022
This chuck fits the MX-210V lathe without modification. I has four mounting holes versus the three mounting holes on the chuck included with the lathe, so three new holes heed to be added to the chuck face plate to hold it, then good to go. This chuck has individually adjustable jaws to allow mounting of non-round work pieces, which greatly increases the versatility of your lathe.
Rating: 4 stars [4 of 5 Stars!]
Items 1 - 6 of 15 reviews
 1  2  3  [Next]