Good Product

For anyone owning a truck, this is a must have. The install was as simple as simple gets. Have one on my '03 and '10 Ford Ranger.

Great product. Their youtube video walks you through installation easy enough. No fit issues but I suggest raising the stencil by an inch or so.

Install on my 2020 Tacoma was simple and took 15 min total. Allows a full size sport bike to fit inside the Tacoma's 5 ft bed with the added security of the bed extender blocking anything from rolling out. Got a great sale price and would def recommend to anyone looking for an easy to install, easy to remove bed extender that's made in the USA.

I was very undecided and skeptical but turned out to be a Great product.

Great product! GREAT value!

Easy assembly, easy installation, works great. The straps are pretty useless, however.

Love the bed extender, AMP research makes a quality product. I installed this on a 2021 Tacoma and the fit was perfect. Assembly and installation was super easy. I do not use the templates, the easiest way is to get it assembled to the proper width and set it in place with the mounting brackets on the extender making sure it is level. Then use masking tape to mark where the bracket needs to be. Then remove the brackets from the extender and hold them in place against your tape lines. Mark one hole and drill it, I used a 1/8 drill bit, its slightly smaller than 9/64 and you get a nice tight screw. Then mount the bracket with the one screw, you can drill the other two holes with the bracket installed avoiding a hole not being lined up. Anyway, it's super easy. Make sure you take note of where your tailgate is when its closed, also make sure the extender seats on the tailgate when its down before you drill holes. On the tacoma my bracket is just about even with the inside edge of the panel the bracket mounts to.

I put this on my 2020 double cab short bed Toyota Tacoma. Assembly was not bad, but installation was a little nerve-wracking since I had to drill into the bed and I was not completely sure if I had the right spot with my added bed mat. I just added some height to account for that and it worked out great. I have put it to use about 5 times in the few weeks since I installed it. It works great for the short bed!

Does what its supposed to. Happy with purchase, 2018 taco, easy install but I may have gone a little to fast.... Only complaint is due to my error. I measured 3 times, but somehow got the one side just a hair higher than the other side. So it's a little (just a hair) higher on one support than the other. My OCD is telling to pull it apart, re-drill and reattach, but I wont drill anymore holes into my truck for this mod. It'll do its job well as is and no one can notice.... but MEASURE AND DRY FIT 4 OR 5 TIMES TO ENSURE ITS SET UP RIGHT!!!

Great fit, easy install, and it looks factory.

This was delivered within a few days of ordering. There is some assembly required but nothing anyone handy with tools couldn't handle easily. It extends the bed, but more importantly it will fold back into the bed of the truck and allow you to put small items such as gas, diesel, groceries, etc and not have them moving and falling over. It is a very durable construction and also looks great.

easy to install

I installed this on my 2020 Tacoma, and the paper layout fit perfectly! Not hard to install. Measure twice and cut once.

The extender works as intended. If you can get over drilling six holes in your truck then your good.21' Tacoma Sport

Works fine. Clear instructions. Easy install if you're handy with tools and take your time to do it right. If not have someone who is. Works fine, does what is suppose to do. Looks cool on my truck. Increased my testosterone, chicks dig it.

Included Printed templates were of incorrect size (printed scaled to fit page). Ended up drilling a bad hole. I had to download and reprint with the correct aspect ratio. Generic manual is unclear what template to use. Is a 2016 tacoma a compact or deep bed? Also, the 7inch measuring tool was no where to be found.

I used the template... made a hole, didn't like it, so eyeballed it! Maybe the template just isn't meant for my 05 Dakota. But, installing by eyeing it was easy enough! Other than the crappy template, it's AWESOME!

Looks great, fits great, really pleased I finally made the purchase. Got this mainly for hauling items with the extender turned in to the bed. I often carry smaller loads and with the factory 3 piece flip up tonneau cover, was always having to open it or climb under to get my loads that slid to the front. I had created a DIY cargo containment which was ok but wasn't very pleasing to look at or work with.Installation was pretty straightforward, watch the YouTube video on AMP's channel (there is one specifically for Tacomas). Follow the directions, the 7” measuring “template” for the bar spacing is just a perforated piece of the box, not obvious but it's there. And if you can handle a drill and a screwdriver you should be fine. I checked the bracket template to make sure the bracket holes matched and they were spot on. Lined up the lower edge of the template with the top of the ridges in the bed, did a dry run with the extender to ensure good front to back location and clearance for the bed cover, marked and drilled. Took my time to measure and line up, only wanted to drill once. And there's no prize for being the fastest. Would rather not have empty holes in my bed than have a record time. So go at your pace and get it right the first time. Overall, feels real solid installed and is a great option for keeping gear secured near the tailgate when my bed isn't full and the cover is on. But I also look forward to utilizing extended storage space on the next camping trip or the next time a friend needs moving help.

Love it!