skip to footer block
KEF ARP 135 4302 Bbc W/Brodix Alum Heads P15923761KEF-A141354302 https://cdnimages.opentip.com/full/KEF/KEF-A141354302.jpg ARP 135 4302 Bbc W/Brodix Alum Heads Manufacturer Part Number: 135-4302Cylinder Head Stud; For Use With Chevy Big Block; Brodix/ BB1 OEFI/ 2/ 2t/ 2x/ 2extra/ 3/ 4/ 4extra/ 5 Heads; 12 Point Nuts; Black Oxide; Chrome MolyAttributes Engine Compatibility: Chevy Big Block V8 396-402-427-454 Cubic Inch Head Type: Brodix Nut Type: 12-Point Finish: Black Oxide Material: Chromoly Steel Product DescriptionIt is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all out competition power plants. Simply stated, there\'s not a better stud setup on the market today. For openers, ARP uses a premium grade 8740 alloy that is rated far superior to \"aircraft\" quality. Each stud is placed vertically in special racks and precisely heat treated to 200,000 PSI. Following heat treat, each stud is centerless ground to make it as close to perfectly concentric as possible. It\'s important to note that lesser quality studs are not even centerless ground, the material is thread rolled in bar stock form. Because ARP studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned, something that won\'t happen with inferior quality head studs. ARP studs are thread rolled after heat treat, which gives them about 1000 Percent (that\'s ten times) better fatigue strength than those studs that are threaded prior to heat treat. It costs a lot more to do it this way, because it\'s tough on tooling, but the results are well worth the extra effort. You will also note that ARP offers specially undercut studs for several engines. This procedure (done only to the shorter studs) more equalizes the \"stretch\" of both studs, which makes for a more consistent clamping force and one that compensates for head gasket compression when the cylinder heads are installed. This helps prevent blown head gaskets, and assures optimum engine sealing! Premium quality heat treated 8740 chrome moly steel head stud kits are available for most every domestic and import applications. You won\'t find a better quality stud on the market from any other source. Look for ARP stamped on each stud as your assurance of quality. Clearly, they are the best on the market today, and the favorite of leading professional engine builders in all forms of racing.Features & Benefits Uses A Premium Grade 8740 Alloy That Is Rated Far Superior To Aircraft Quality Stud Is Placed Vertically In Special Racks And Precisely Heat Treated To 200,000 PSI Centerless Ground To Make It As Close To Perfectly Concentric As Possible Thread Rolled After Heat Treat, Which Gives Them About Ten Times Better Fatigue Strength Than Those Studs That Are Threaded Prior To Heat Treat Limited 90 Day Warranty 15923761 672036024451 7.4400lbs 0.00 0.00 0.00
ARP
374.1200 2025-07-17 Only 1 left In Stock
  »  
  »  
  »  
  »  
  »  
  »  

ARP 135-4302 Bbc W/Brodix Alum Heads

Brand ARP
Shop more from KEF
UPC: 672036024451
SKU: KEF-A141354302
Price: $374.12
Quantity:
Only 1 left In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 135-4302

Cylinder Head Stud; For Use With Chevy Big Block; Brodix/ BB1 OEFI/ 2/ 2t/ 2x/ 2extra/ 3/ 4/ 4extra/ 5 Heads; 12 Point Nuts; Black Oxide; Chrome Moly

Attributes

  • Engine Compatibility: Chevy Big Block V8 396-402-427-454 Cubic Inch
  • Head Type: Brodix
  • Nut Type: 12-Point
  • Finish: Black Oxide
  • Material: Chromoly Steel


Product Description

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all out competition power plants. Simply stated, there's not a better stud setup on the market today. For openers, ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is placed vertically in special racks and precisely heat treated to 200,000 PSI. Following heat treat, each stud is centerless ground to make it as close to perfectly concentric as possible. It's important to note that lesser quality studs are not even centerless ground, the material is thread rolled in bar stock form. Because ARP studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned, something that won't happen with inferior quality head studs. ARP studs are thread rolled after heat treat, which gives them about 1000 Percent (that's ten times) better fatigue strength than those studs that are threaded prior to heat treat. It costs a lot more to do it this way, because it's tough on tooling, but the results are well worth the extra effort. You will also note that ARP offers specially undercut studs for several engines. This procedure (done only to the shorter studs) more equalizes the "stretch" of both studs, which makes for a more consistent clamping force and one that compensates for head gasket compression when the cylinder heads are installed. This helps prevent blown head gaskets, and assures optimum engine sealing! Premium quality heat treated 8740 chrome moly steel head stud kits are available for most every domestic and import applications. You won't find a better quality stud on the market from any other source. Look for ARP stamped on each stud as your assurance of quality. Clearly, they are the best on the market today, and the favorite of leading professional engine builders in all forms of racing.

Features & Benefits

  • Uses A Premium Grade 8740 Alloy That Is Rated Far Superior To Aircraft Quality
  • Stud Is Placed Vertically In Special Racks And Precisely Heat Treated To 200,000 PSI
  • Centerless Ground To Make It As Close To Perfectly Concentric As Possible
  • Thread Rolled After Heat Treat, Which Gives Them About Ten Times Better Fatigue Strength Than Those Studs That Are Threaded Prior To Heat Treat
  • Limited 90 Day Warranty

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Shipping Restrictions

This product can't be shipped to the following regions: CA.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
0 reviews
Be the first to review this item!
Write a Review