0 reviews
Be the first to review this item!
B&C 12FCX76 12" Professional Coaxial Speaker 80 x 80 8 Ohm
Brand B&C Speakers
Shop more from PEX
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: 12FCX76
The B&C 12FCX76 12" coaxial speaker's high-strength LF/HF motor, titanium diaphragm HF driver, and FEA-optimized design produce high output and minimal distortion.
Key Features:
B&C 12FCX76 12" Professional Coaxial Speaker 80 x 80 8 Ohm
B&C's 12FCX76 12" coaxial loudspeaker produces generous amount of low-distortion output despite its compact form factor. The 12FCX76 offers resolution and accuracy that are suitable for professional "fill" loudspeakers, stage monitor wedges, studio monitors, or high-efficiency home audio systems. Power handling is 700 watts continuous program; combined with the driver's high efficiency, this results in very good maximum output. The 12FCX76's large-format HF compression driver permits an exceptionally low crossover point of 1,200 Hz, which offers a more consistent directivity transition from LF cone to HF horn.
The B&C 12FCX76 12" coaxial speaker's high-strength LF/HF motor, titanium diaphragm HF driver, and FEA-optimized design produce high output and minimal distortion.
Key Features:
- Coaxial HF driver with 3" voice coil, titanium diaphragm, and 80° nominal coverage
- High-energy ferrite magnet shared by LF and HF components
- Woofer's copper-wound 3" voice coil ensures good power handling
- 1.2 kHz recommended crossover point
- Use with passive or active crossover (not included)
B&C 12FCX76 12" Professional Coaxial Speaker 80 x 80 8 Ohm
B&C's 12FCX76 12" coaxial loudspeaker produces generous amount of low-distortion output despite its compact form factor. The 12FCX76 offers resolution and accuracy that are suitable for professional "fill" loudspeakers, stage monitor wedges, studio monitors, or high-efficiency home audio systems. Power handling is 700 watts continuous program; combined with the driver's high efficiency, this results in very good maximum output. The 12FCX76's large-format HF compression driver permits an exceptionally low crossover point of 1,200 Hz, which offers a more consistent directivity transition from LF cone to HF horn.
Product Details | |
|---|---|
| Brand | B&C Speakers |
| Model | 12FCX76 |
| Part Number | 294-5770 |
| UPC | 848864008752 |
| Unit of Measure | Each |
| Weight | 21.05 |
Product Specifications | |
|---|---|
| Nominal Diameter | 12" |
| Bolt Circle Diameter | 11.7 |
| Moving Mass Of Diaphragm (Mmd) | 54 |
| Power Handling (RMS) | 350 Watts |
| Power Handling (MAX) | 700 Watts |
| Impedance | 8Ω |
| Frequency Response | 47 to 18,000Hz |
| Sensitivity | 98dB 2.83V/1m |
| Voice Coil Diameter | 3" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 47Hz |
| DC Resistance (Re) | 5Ω |
| Voice Coil Inductance (Le) | 1.3mH |
| Mechanical Q (Qms) | 11 |
| Electromagnetic Q (Qes) | 0.35 |
| Total Q (Qts) | 0.34 |
| Compliance Equivalent Volume (Vas) | 2.98ft³ |
| BL Product (BL) | 15.6T·m |
| Maximum Linear Excursion (Xmax) | 6.5mm |
| Surface Area of Cone (Sd) | 522cm² |
Materials of Construction | |
|---|---|
| Cone Material | Coated Paper |
| Voice Coil Wire Material | Copper |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 12.5" |
| Baffle Cutout Diameter | 11.1" |
| Depth | 6.65" |
| # Mounting Holes | 8 |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category