0 reviews
Be the first to review this item!
B&C 8CXN51 8" Professional Neodymium Coaxial Speaker 100 x 100 8 Ohm
Brand B&C Speakers
Shop more from PEX
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: 8CXN51
The B&C 8CXN51 speaker's neodymium LF/HF motor, polyimide diaphragm HF driver, and FEA-optimized design produce high output and minimal distortion.
Key Features:
B&C 8CXN51 8" Professional Neodymium Coaxial Speaker 100 x 100 8 Ohm
B&C's 8CXN51 8" coaxial loudspeaker produces generous amount of low-distortion output despite its compact form factor. The 8CXN51 offers resolution and accuracy that are suitable for professional "fill" loudspeakers, stage monitor wedges, studio monitors, or high-efficiency home audio systems. Power handling is 500 watts continuous program, which combined with the driver's high efficiency results in very good maximum output.
The B&C 8CXN51 8" coaxial speaker's optimized driver alignment delivers the coherency and focus expected from a point source design. In addition to this superior articulation and accuracy, the 8CN51 requires very little baffle area compared to separate LF and HF components.
The B&C 8CXN51 speaker's neodymium LF/HF motor, polyimide diaphragm HF driver, and FEA-optimized design produce high output and minimal distortion.
Key Features:
- Coaxial HF driver with 1.7" voice coil, polyimide diaphragm, and 100° nominal coverage
- Neodymium ring magnet shared by LF and HF components keeps weight low
- Aluminum-wound 2" woofer voice coil ensures good power handling
- 1.8 kHz recommended crossover point
- Use with passive or active crossover (not included)
B&C 8CXN51 8" Professional Neodymium Coaxial Speaker 100 x 100 8 Ohm
B&C's 8CXN51 8" coaxial loudspeaker produces generous amount of low-distortion output despite its compact form factor. The 8CXN51 offers resolution and accuracy that are suitable for professional "fill" loudspeakers, stage monitor wedges, studio monitors, or high-efficiency home audio systems. Power handling is 500 watts continuous program, which combined with the driver's high efficiency results in very good maximum output.
The B&C 8CXN51 8" coaxial speaker's optimized driver alignment delivers the coherency and focus expected from a point source design. In addition to this superior articulation and accuracy, the 8CN51 requires very little baffle area compared to separate LF and HF components.
Product Details | |
|---|---|
| Brand | B&C Speakers |
| Model | 8CXN51 |
| Part Number | 294-5764 |
| UPC | 848864008813 |
| Unit of Measure | Each |
| Weight | 7 |
Product Specifications | |
|---|---|
| Nominal Diameter | 8" |
| Bolt Circle Diameter | 8.3 |
| Moving Mass Of Diaphragm (Mmd) | 22 |
| Power Handling (RMS) | 225 Watts |
| Power Handling (MAX) | 500 Watts |
| Impedance | 8Ω |
| Frequency Response | 70 to 18,000Hz |
| Sensitivity | 97dB 2.83V/1m |
| Voice Coil Diameter | 2" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 68Hz |
| DC Resistance (Re) | 5Ω |
| Voice Coil Inductance (Le) | 0.9mH |
| Mechanical Q (Qms) | 4.7 |
| Electromagnetic Q (Qes) | 0.29 |
| Total Q (Qts) | 0.27 |
| Compliance Equivalent Volume (Vas) | 0.6ft³ |
| BL Product (BL) | 12.6T·m |
| Maximum Linear Excursion (Xmax) | 6mm |
| Surface Area of Cone (Sd) | 220cm² |
Materials of Construction | |
|---|---|
| Cone Material | Coated Paper |
| Voice Coil Wire Material | Aluminum |
| Magnet Material | Neodymium |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 8.8" |
| Baffle Cutout Diameter | 7.4" |
| Depth | 4.4" |
| # Mounting Holes | 8 |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category