0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: 700
Battery Disconnect Switch; Easyfit ™; Recessed Or Surface Mount; 48 Volt DC; Key Type On/Off Switch; 275 Amp DC Continuous/ 455 Amp DC Intermittent/ 1250 Amp DC Cranking; 2.7 Inch Length x 2.7 Inch Width x 4.3 Inch Height; With Removable Back Cover
Product Info
The Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4 Inch. This switch uses the same features as the 701 with the removable key 45 Degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 Degree Celsius (212 degree Fahrenheit) above the ambient temperature. The continuous and intermittent ratings are tested at 110 percent of specified ratings.
Type: Key
Activation Type: Manual
Continuous Ampere Rating (A): 275 Amp
Surge Ampere Rating (A): 1250 Amp
Installation Type: Bolt-On
Features
Product Size
Product Height(inch): 2.9
Product Length(inch): 4.3
Product Width(inch): 3
Product Weight(lbs): 0.35
Battery Disconnect Switch; Easyfit ™; Recessed Or Surface Mount; 48 Volt DC; Key Type On/Off Switch; 275 Amp DC Continuous/ 455 Amp DC Intermittent/ 1250 Amp DC Cranking; 2.7 Inch Length x 2.7 Inch Width x 4.3 Inch Height; With Removable Back Cover
Product Info
The Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4 Inch. This switch uses the same features as the 701 with the removable key 45 Degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 Degree Celsius (212 degree Fahrenheit) above the ambient temperature. The continuous and intermittent ratings are tested at 110 percent of specified ratings.
Type: Key
Activation Type: Manual
Continuous Ampere Rating (A): 275 Amp
Surge Ampere Rating (A): 1250 Amp
Installation Type: Bolt-On
Features
- Molded In High Temperature, Fiber Reinforced Plastics
- Tin-Plated Copper Studs And Nuts
- Ignition Protected
- Can Easily Be Retro-Fitted In Place Of Most European Post And Lever Type Switches
- Easily Removable Threaded Ring Allows For Panel Thicknesses Up To 3/4 Inch
- Features As The 701 With The Removable Knob 45 Degree Past The Off Position
- Limited 2 Year Warranty
Product Size
Product Height(inch): 2.9
Product Length(inch): 4.3
Product Width(inch): 3
Product Weight(lbs): 0.35
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Shipping Restrictions
This product can't be shipped to Canada, Australia, United Kingdom, APO addresses or the following regions: HI, AK, PR.
Note
This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category