skip to footer block
NTP BEP 701 On/Off Battery Switch P12858881NTP-B7V701 https://cdnimages.opentip.com/full/NTP/NTP-B7V701.jpg BEP 701 On/Off Battery Switch Manufacturer Part Number: 701Battery Disconnect Switch; Recessed Or Surface Mount; 48 Volt DC; Key Type On/Off Switch; 275 Amp DC Continuous/ 455 Amp DC Intermittent/ 1250 Amp DC Cranking; 2-3/4 Inch Length x 2-3/4 Inch Width x 3 Inch Height; With Removable Plates/ Back CoverProduct InfoThis switch offers a number of unique features, the highlight being the patented Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. The control knob can be removed by switching to an counterclockwise 45 Degree position. This control knob also features an interchangeable labeling system allowing a full range of applications. Three removable side plates provide access of up to 1/0 cables. The rear cover insulating the rear terminals against any short circuits. This ensures that the switch meets ABYC requirements. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 Degree Celsius (212 Degree Fahrenheit) above the ambient temperature. The continuous and intermittent ratings are tested at 110 percent of specified ratings.Type: KeyActivation Type: ManualContinuous Ampere Rating (A): 275 AmpSurge Ampere Rating (A): 1250 AmpInstallation Type: Bolt-OnFeatures Tin-Plated Copper Studs And Nuts Ignition Protected Can Be Either Surface Or Recess Mounted By Cutting A 2.1 Inch Hole Please Note Selector Switches Will Not Separate Electronics From Harmful Engine Starting Spikes Patented Contour Locking System Allows Switch To Be A Stand Alone Unit Or Locked Together With Other Switches Control Knob Can Be Removed By Switching To Counter-Clockwise 45 Degree Position Three Removable Side Plates For Access Of Up To 1/0 Cables Plus A Rear Cover Insulating The Rear Terminals Against Any Short Circuits Limited 2 Year Warranty Product SizeProduct Height(inch): 2.9Product Length(inch): 4.3Product Width(inch): 3Product Weight(lbs): 0.35 12858881 870216000015 0.4200lbs 0.00 0.00 0.00
BEP
32.3700 2025-07-13 36 In Stock

BEP 701 On/Off Battery Switch

Brand BEP
Shop more from NTP

UPC: 870216000015
SKU: NTP-B7V701
Price: $32.37
Quantity:
36 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 701

Battery Disconnect Switch; Recessed Or Surface Mount; 48 Volt DC; Key Type On/Off Switch; 275 Amp DC Continuous/ 455 Amp DC Intermittent/ 1250 Amp DC Cranking; 2-3/4 Inch Length x 2-3/4 Inch Width x 3 Inch Height; With Removable Plates/ Back Cover

Product Info
This switch offers a number of unique features, the highlight being the patented Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. The control knob can be removed by switching to an counterclockwise 45 Degree position. This control knob also features an interchangeable labeling system allowing a full range of applications. Three removable side plates provide access of up to 1/0 cables. The rear cover insulating the rear terminals against any short circuits. This ensures that the switch meets ABYC requirements. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 Degree Celsius (212 Degree Fahrenheit) above the ambient temperature. The continuous and intermittent ratings are tested at 110 percent of specified ratings.

Type: Key

Activation Type: Manual

Continuous Ampere Rating (A): 275 Amp

Surge Ampere Rating (A): 1250 Amp

Installation Type: Bolt-On

Features
  • Tin-Plated Copper Studs And Nuts
  • Ignition Protected
  • Can Be Either Surface Or Recess Mounted By Cutting A 2.1 Inch Hole
  • Please Note Selector Switches Will Not Separate Electronics From Harmful Engine Starting Spikes
  • Patented Contour Locking System Allows Switch To Be A Stand Alone Unit Or Locked Together With Other Switches
  • Control Knob Can Be Removed By Switching To Counter-Clockwise 45 Degree Position
  • Three Removable Side Plates For Access Of Up To 1/0 Cables Plus A Rear Cover Insulating The Rear Terminals Against Any Short Circuits
  • Limited 2 Year Warranty


Product Size
Product Height(inch): 2.9
Product Length(inch): 4.3
Product Width(inch): 3
Product Weight(lbs): 0.35

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Shipping Restrictions

This product can't be shipped to Canada, Australia, United Kingdom, APO addresses or the following regions: HI, AK, PR.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!