skip to footer block
CWR BEP Easy Fit Battery Switch 275A Continuous P10113680CWR-60031 https://cdnimages.opentip.com/full/CWR/CWR-60031.jpg BEP Easy Fit Battery Switch 275A Continuous Manufacturer Part Number: 700Easy Fit Battery Switch - 275A ContinuousThe Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4\" (19 mm). This switch uses the same features as the 701 with the removable key 45 degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style compared to other switches available on the market. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.Features:• Can easily be retro-fitted in place of most European post and lever type switches• Molded in high temperature, fiber reinforced plastics• Tin-plated copper studs and nuts• Ignition-protected 10113680 870216000169 0.7000lbs 3.00 4.00 8.00
BEP Marine
42.7700 2025-07-20 10 In Stock

BEP Easy Fit Battery Switch - 275A Continuous

Brand BEP Marine
Shop more from CWR

UPC: 870216000169
SKU: CWR-60031
Price: $42.77
Quantity:
Shipping:
$7.95 To [ 43215 ]
10 In Stock
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 700

Easy Fit Battery Switch - 275A Continuous

The Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4" (19 mm). This switch uses the same features as the 701 with the removable key 45 degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style compared to other switches available on the market. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.

Features:

• Can easily be retro-fitted in place of most European post and lever type switches

• Molded in high temperature, fiber reinforced plastics

• Tin-plated copper studs and nuts

• Ignition-protected

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Shipping Restrictions

This product can't be shipped to Canada, Australia, United Kingdom, APO addresses or the following regions: HI, AK, PR.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!