skip to footer block
KEF BEP On/Off Battery Switch Easy Fit BEP Marine 700 P14239808KEF-B7V700 https://cdnimages.opentip.com/full/KEF/KEF-B7V700.jpg BEP On/Off Battery Switch Easy Fit BEP Marine 700 Manufacturer Part Number: 700Battery Disconnect Switch; Easyfit ™; Recessed Or Surface Mount; 48 Volt Dc; Key Type On/Off Switch; 275 Amp Dc Continuous/ 455 Amp Dc Intermittent/ 1250 Amp Dc Cranking; 2.7 Inch Length X 2.7 Inch Width X 4.3 Inch Height; With Removable Back CoverAttributes Type: Key Activation Type: Manual Continuous Ampere Rating (A): 275 Amp Surge Ampere Rating (A): 1250 Amp Installation Type: Bolt-On Product Description The Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4 Inch. This switch uses the same features as the 701 with the removable key 45 Degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 Degree Celsius (212 degree Fahrenheit) above the ambient temperature. The continuous and intermittent ratings are tested at 110 percent of specified ratings.Features & Benefits Molded In High Temperature, Fiber Reinforced Plastics Tin-Plated Copper Studs And Nuts Ignition Protected Can Easily Be Retro-Fitted In Place Of Most European Post And Lever Type Switches Easily Removable Threaded Ring Allows For Panel Thicknesses Up To 3/4 Inch Features As The 701 With The Removable Knob 45 Degree Past The Off Position Limited 2 Year Warranty 14239808 870216000169 0.6000lbs 0.00 0.00 0.00
BEP
34.2900 2025-07-13 37 In Stock
customer review - by , July 7, 2023
5/ 5stars
Worked perfectly on camper.
customer review - by , June 6, 2023
5/ 5stars
Allows me to cut power to my electronics when not on the water. If you have to leave the boat outside, mother nature has a way of causing corrosion etc. If you can keep your boat garaged then you're much better off.
customer review - by , June 6, 2023
5/ 5stars
Back plate has been redesigned.
customer review - by , May 5, 2023
5/ 5stars
Seems like it has good quality
customer review - by , August 8, 2022
5/ 5stars
Just as advertised. Thank you.
customer review - by , May 5, 2022
5/ 5stars
No complaints. It is an exact replacement for the original.
customer review - by , March 3, 2022
5/ 5stars
Fits flush in power panel.
customer review - by , March 3, 2022
5/ 5stars
Good quality
customer review - by , December 12, 2021
5/ 5stars
I installed this between my RV's solar charge controller and my batteries. Easy to install and it is a high quality switch.
customer review - by , November 11, 2021
5/ 5stars
terrible construction. broke right out of the box

BEP On/Off Battery Switch Easy Fit, BEP Marine 700

stars Rating 5 | 11 reviews
Brand BEP
Shop more from KEF

UPC: 870216000169
SKU: KEF-B7V700
Price: $34.29
Quantity:
37 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 700

Battery Disconnect Switch; Easyfit ™; Recessed Or Surface Mount; 48 Volt Dc; Key Type On/Off Switch; 275 Amp Dc Continuous/ 455 Amp Dc Intermittent/ 1250 Amp Dc Cranking; 2.7 Inch Length X 2.7 Inch Width X 4.3 Inch Height; With Removable Back Cover

Attributes

  • Type: Key
  • Activation Type: Manual
  • Continuous Ampere Rating (A): 275 Amp
  • Surge Ampere Rating (A): 1250 Amp
  • Installation Type: Bolt-On


Product Description


The Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4 Inch. This switch uses the same features as the 701 with the removable key 45 Degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 Degree Celsius (212 degree Fahrenheit) above the ambient temperature. The continuous and intermittent ratings are tested at 110 percent of specified ratings.

Features & Benefits

  • Molded In High Temperature, Fiber Reinforced Plastics
  • Tin-Plated Copper Studs And Nuts
  • Ignition Protected
  • Can Easily Be Retro-Fitted In Place Of Most European Post And Lever Type Switches
  • Easily Removable Threaded Ring Allows For Panel Thicknesses Up To 3/4 Inch
  • Features As The 701 With The Removable Knob 45 Degree Past The Off Position
  • Limited 2 Year Warranty

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Shipping Restrictions

This product can't be shipped to Canada, Australia, United Kingdom, APO addresses or the following regions: CA, HI, AK, PR.

Return Policy

This item is non-returnable.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
5 stars
11
4 stars
0
3 stars
0
2 stars
0
1 stars
0
By Todd Kerr
Date: July 05, 2023
Worked perfectly on camper.
Rating: 5 stars [5 of 5 Stars!]
By Dave Dunham
Date: June 18, 2023
Allows me to cut power to my electronics when not on the water. If you have to leave the boat outside, mother nature has a way of causing corrosion etc. If you can keep your boat garaged then you're much better off.
Rating: 5 stars [5 of 5 Stars!]
By steven comenzind
Date: June 13, 2023
Back plate has been redesigned.
Rating: 5 stars [5 of 5 Stars!]
By BPalma
Date: May 09, 2023
Seems like it has good quality
Rating: 5 stars [5 of 5 Stars!]
By Douglas Carey
Date: August 10, 2022
Just as advertised. Thank you.
Rating: 5 stars [5 of 5 Stars!]
By Kindle Customer
Date: May 26, 2022
No complaints. It is an exact replacement for the original.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 11 reviews
 1  2  [Next]