0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: G4361
Control System, Balboa BP7, 230V, 4.0kW Plug-n-Click Heater, Can run 1-4 Pumps
Balboa BP7 Spa Control 4.0kW Flow Thru Heater G4361
The Next Generation of BP Hot Tub Control Systems is finally here.
With 7 relays, the BP7 has 32 different setups and can power a spa with 1-4 pumps, including Microsilk systems. Can also replace any Balboa BP System* while using the existing topside that is already installed on the spa. Will replace any Balboa VS or EL System* when you match it with any TP or SpaTouch topside panel. Will replace any Balboa or other brand's non-low flow system* when you match it with any TP or SpaTouch topside panel. This system can also be used as 110v or 220v.
Features:
-CAN REPLACE ANY BP BALBOA SYSTEM* - While using the existing topside that is already installed on the spa
-CAN REPLACE ANY BALBOA VS OR EL SYSTEM* - When you match it with any TP or SpaTouch™ topside panel
*Both the Circ pump and Ozone can be converted to 120V, however they will be the same voltage after conversion. (Both 120V or both 240V.)
*If a 24 hour circulation pump is being installed, it must have no less than a 23 GPM flow. Laing, Grundfos or Waterway Tiny Might pumps do not perform at this rate and cannot be used.
Control System, Balboa BP7, 230V, 4.0kW Plug-n-Click Heater, Can run 1-4 Pumps
Balboa BP7 Spa Control 4.0kW Flow Thru Heater G4361
The Next Generation of BP Hot Tub Control Systems is finally here.
With 7 relays, the BP7 has 32 different setups and can power a spa with 1-4 pumps, including Microsilk systems. Can also replace any Balboa BP System* while using the existing topside that is already installed on the spa. Will replace any Balboa VS or EL System* when you match it with any TP or SpaTouch topside panel. Will replace any Balboa or other brand's non-low flow system* when you match it with any TP or SpaTouch topside panel. This system can also be used as 110v or 220v.
Features:
- Supports all TP and SpaTouch topsides
- Supports all BP ancillary products (ControlMySpa, BBA, CZ and Status Pro)
- Plug-N-Click Heater
- WiFi Included
-CAN REPLACE ANY BP BALBOA SYSTEM* - While using the existing topside that is already installed on the spa
-CAN REPLACE ANY BALBOA VS OR EL SYSTEM* - When you match it with any TP or SpaTouch™ topside panel
*Both the Circ pump and Ozone can be converted to 120V, however they will be the same voltage after conversion. (Both 120V or both 240V.)
*If a 24 hour circulation pump is being installed, it must have no less than a 23 GPM flow. Laing, Grundfos or Waterway Tiny Might pumps do not perform at this rate and cannot be used.
Additional Information
| System Voltage | 230V |
| Heater Type | Flow Thru |
| Heater Wattage | 4.0kW |
| Keypad Included | Not Included |
| Supports | Pump1 + Pump2 + Pump3 + Blower |
Alternate Part Numbers
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Specifications
| Compatible With | Balboa |
Return Policy
All SAD- items are non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item