5 out of 5
Product Description
Manufacturer Part Number: G6405
Control System Kit, Balboa BP7, all outputs are 230V, 4.0kW, 1-2 Pumps w/TP500 Topside & Light Cord
Balboa BP7 Spa Control 4.0kW Flow Thru Heater G6405
The Next Generation of Balboa BP Hot Tub Control Systems is finally here.
With 7 relays, the BP7 has 32 different setups and can power a spa with 1-4 pumps, including Microsilk systems. Can also replace any Balboa BP System* while using the existing topside that is already installed on the spa. Will replace any Balboa VS or EL System* when you match it with any TP or SpaTouch topside panel. Will replace any Balboa or other brand's non-low flow system* when you match it with any TP or SpaTouch topside panel. This system can also be used as 110v or 220v.
Features:
Kit Includes:
-CAN REPLACE ANY BP BALBOA SYSTEM* - While using the existing topside that is already installed on the spa
-CAN REPLACE ANY BALBOA VS OR EL SYSTEM* - When you match it with any TP or SpaTouch™ topside panel
*Both the Circ pump and Ozone can be converted to 120V, however, they will be the same voltage after conversion. (Both 120V or both 240V.)
*If a 24-hour circulation pump is being installed, it must have no less than a 23 GPM flow. Laing, Grundfos, or Waterway Tiny Might pumps do not perform at this rate and cannot be used.
Control System Kit, Balboa BP7, all outputs are 230V, 4.0kW, 1-2 Pumps w/TP500 Topside & Light Cord
Balboa BP7 Spa Control 4.0kW Flow Thru Heater G6405
The Next Generation of Balboa BP Hot Tub Control Systems is finally here.
With 7 relays, the BP7 has 32 different setups and can power a spa with 1-4 pumps, including Microsilk systems. Can also replace any Balboa BP System* while using the existing topside that is already installed on the spa. Will replace any Balboa VS or EL System* when you match it with any TP or SpaTouch topside panel. Will replace any Balboa or other brand's non-low flow system* when you match it with any TP or SpaTouch topside panel. This system can also be used as 110v or 220v.
Features:
- Supports all TP and SpaTouch topsides
- Supports all BP ancillary products (ControlMySpa, BBA, CZ, and Status Pro)
- Plug-N-Click Heater
- WiFi Included
Kit Includes:
- G4361 - Balboa BP7 System with 4.0kW Heater
- 57238-01 - Balboa TP500 Panel, Less Overlay
- 17183 - TP500 Panel Overlay (6-Button, Rectangle)
- 25098 - Wire Assembly, 8ft for spa light
- 15480 - Panel Bezel (Adapter Plate)
-CAN REPLACE ANY BP BALBOA SYSTEM* - While using the existing topside that is already installed on the spa
-CAN REPLACE ANY BALBOA VS OR EL SYSTEM* - When you match it with any TP or SpaTouch™ topside panel
*Both the Circ pump and Ozone can be converted to 120V, however, they will be the same voltage after conversion. (Both 120V or both 240V.)
*If a 24-hour circulation pump is being installed, it must have no less than a 23 GPM flow. Laing, Grundfos, or Waterway Tiny Might pumps do not perform at this rate and cannot be used.
Additional Information
| System Voltage | 230V |
| Heater Type | Flow Thru |
| Heater Wattage | 4.0kW |
| Keypad Included | Included |
| Supports | Pump1 + Blower/Pump2 |
Alternate Part Numbers
- 54219
- 54216
- 54217
- 54220
- Replaces - VS300, VS500Z, VS501Z, VS501SZ, VS503SZ, VS504SZ, VS510SZ, VS510DZ, VS511Z, VS511SZ
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Product Warranty
This item has one year warranty.
Return Policy
All SAD- items are non-returnable.
Note
This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By A Customer
Date: May 26, 2023
Easy pack exchange. Topside was easily mounted. It came with an adapter plate for it but I didn't use it. Installed it, started it and one year later still enjoying it. My tub had a 15 yr old Balboa pack from the factory. I recommend this set but don't buy them all. I might want another one.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Kindle Customer
Date: January 07, 2023
This unit was easy to install and a direct replacement for old unit. Even the mounting screws all lined up.If it had not been a direct replacement fit, unit came with glue couplers which would have been an easy refit.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Mari
Date: September 23, 2022
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Mari
Date: September 23, 2022
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By TigerPops
Date: July 19, 2022
Although I did not video this installation, it went perfectly. This Balboa 54216-Z Spa Control System VS500 system was a perfect fit for our old Avalon Spa. Fairly pricey, but well worth the expense in a solid replacement system from top to bottom, pardon the pun !! The top side control panel is both visually appealing and operationally on point. The full bottom side system was easy to configure and connect. Very thankful these Balboa retrofit systems are available.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By george herzberg
Date: July 04, 2022
I tried ordering the same unit from the manufacturer and they actually want it twice the price. This is why you must lock always for better pricing. The system install easily and is working properly.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]