0 reviews
Be the first to review this item!
CE Distribution P-PKIT-JEN Parts Kit - V828 Italian Fuzz Pedal, PCB Version, Premium Build
Brand CE Distribution
Shop more from CED
* Click "Add to Cart" to calculate shipping and delivery time.
Product Description
Manufacturer Part Number: P-PKIT-JEN
PCB and parts kit for the V828 fuzz pedal. This is based on the classic Italian-made V828 Tone Bender. These were also sold under the Jen brand. This kit includes all of the resistors, capacitors, and solder tags used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own. In addition to the PCB parts, a footswitch, pots, jacks, PCB bracket, and battery snap are all included in this parts kit.
Note: Transistors, enclosure, battery, battery holder, and wire are not included.
The V828 Italian Fuzz premium parts kit includes the following high quality parts:
This parts kit includes both a 3.3nF and 4.7nF output cap. This is so users can choose which version to build. The 4.7nF version passes more bass frequencies than the 3.3nF version.
The vintage style gray and blue shielded wire seen in photos is .
was used for the non-shielded wire connections. This is a high quality wire with color options that has a similar appearance as the wire used in the original builds. It also features a top-coat of solder so no tinning is required.
When mounting the battery strain relief, be sure to use a flat washer.
A staking tool such as or is required for attaching the solder tags to the PCB using the included eyelets.
The enclosure was used for the build in the photos. This enclosure is pedalboard friendly but has plenty of room for vintage style wiring. A drill guide used to drill the enclosure in the photos is in the Specifications, Files, and Documents section below.
SKU:
P-PKIT-JEN
Item ID:
047013
Type:
Parts Kits, Fuzz Parts, Effect Pedals (Kits)
Measurements and Specs:
PCB and parts kit for the V828 fuzz pedal. This is based on the classic Italian-made V828 Tone Bender. These were also sold under the Jen brand. This kit includes all of the resistors, capacitors, and solder tags used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own. In addition to the PCB parts, a footswitch, pots, jacks, PCB bracket, and battery snap are all included in this parts kit.
Note: Transistors, enclosure, battery, battery holder, and wire are not included.
The V828 Italian Fuzz premium parts kit includes the following high quality parts:
- Phenolic V828 PCB with Solder Tags
- V828 Replica PCB Mounting Bracket
- Vishay PR02 Resistors
- Vishay BC Electrolytic Capacitors
- Vishay Roederstein MKT1813 & Mallory Film Capacitors
- Alpha Pots
- Switchcraft Jacks
- Carling DPDT Footswitch
- Premium I-Style Battery Clip
- Battery Cable Strain Relief
| Item | SKU | Quantity |
|---|---|---|
| Phenolic PCB -V828 Fuzz | 1 | |
| PR02 Resistor - 820Ω | 1 | |
| PR02 Resistor - 1kΩ | 1 | |
| PR02 Resistor - 8.2kΩ | 1 | |
| PR02 Resistor - 10kΩ | 1 | |
| PR02 Resistor - 47kΩ | 1 | |
| Vishay Roederstein Film Cap - 150nF | 1 | |
| Mallory Film Cap - 3.3nF | 1 | |
| Mallory Film Cap - 4.7nF | 1 | |
| Vishay BC Electrolytic - 22uF | 1 | |
| Alpha 24mm Pot - A50K | 1 | |
| Alpha 24mm Pot - B1K | 1 | |
| Switchcraft Jack - Mono | 1 | |
| Switchcraft Jack - Stereo | 1 | |
| Carling DPDT Footswitch - Bottom Lugs | 1 | |
| I-Style Battery Clip | 1 | |
| M3.5 / #6 Solder Tag | 1 | |
| Eyelets | 1 | |
| Cable Clamp | 1 | |
| PCB Bracket | 1 | |
| M3 Screws | 1 | |
| Flat Washers | 1 |
This parts kit includes both a 3.3nF and 4.7nF output cap. This is so users can choose which version to build. The 4.7nF version passes more bass frequencies than the 3.3nF version.
The vintage style gray and blue shielded wire seen in photos is .
was used for the non-shielded wire connections. This is a high quality wire with color options that has a similar appearance as the wire used in the original builds. It also features a top-coat of solder so no tinning is required.
When mounting the battery strain relief, be sure to use a flat washer.
A staking tool such as or is required for attaching the solder tags to the PCB using the included eyelets.
The enclosure was used for the build in the photos. This enclosure is pedalboard friendly but has plenty of room for vintage style wiring. A drill guide used to drill the enclosure in the photos is in the Specifications, Files, and Documents section below.
SKU:
P-PKIT-JEN
Item ID:
047013
Type:
Parts Kits, Fuzz Parts, Effect Pedals (Kits)
Accessory Items:
Wire - Coax, 24AWG, Spiral Shield, 0.138" outer diameter
Wire - Weico, 24AWG Stranded, Top Coat Pre-Tinned, 300V, 50 feet
Knob - Phenolic, Set Screw, Chicken Head
Knob - Black, Cap, Set Screw, Marshall Style, No Indicator
Measurements and Specs:
| No measurements are currently available for this product. Please if you have any questions. |
| Packaging Dimensions | 1 in. × 1 in. × 1 in. |
| Weight (Packaging) | 0.2702 lbs. |
 1590J Drill Template | All Models |
| Vintage Wiring | All Models |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category