5 out of 5
CE Distribution R-VWAH-POT-X Potentiometer - Wah replacement pot with gear
* Click "Add to Cart" to calculate shipping and delivery time.
Product Description
Manufacturer Part Number: R-VWAH-POT-X
Standard vintage style wah pots with solder lugs and gear included.
Part # R-VWAH-POT (100K) has an audio taper. All others are linear.
Measurements and Specs
Files
Standard vintage style wah pots with solder lugs and gear included.
Part # R-VWAH-POT (100K) has an audio taper. All others are linear.
Measurements and Specs
| Body Depth | 11.2 mm | ||
| Body Width | 24 mm | ||
| Bushing Length | 15 mm | ||
| Bushing Thread | M9X0.75 | ||
| C.C Torque | 100-350 gf-cm | ||
| Insulation Resistance | >100 MΩ at 500VDC | ||
| Life | 15,000 cycles | ||
| Manual Soldering Max Temp for 3 sec. | 300 °C | ||
| Max. Working Voltage | 100 kΩ version | R-VWAH-POT | 250V |
| 125 kΩ version | R-VWAH-125KL | 500V | |
| 150 kΩ version | R-VWAH-150KL | 500V | |
| 200 kΩ version | R-VWAH-200KL | 500V | |
| Max Rotational Stopper Strength | 8Kgf | ||
| Operating (Useable) Temperature | -10 °C to +70 °C | ||
| Rated Wattage (Power) | 100 kΩ version | R-VWAH-POT | 0.25W |
| 125 kΩ version | R-VWAH-125KL | 0.5W | |
| 150 kΩ version | R-VWAH-150KL | 0.5W | |
| 200 kΩ version | R-VWAH-200KL | 0.5W | |
| Rotational Torque | 50-350 gf-cm | ||
| Shaft Diameter | 6.35 mm | ||
| Sliding Noise | <47 mV | ||
| Tap Residual Resistance | ≤20 Ω | ||
| Taper | 100 kΩ version | R-VWAH-POT | Audio |
| 125 kΩ version | R-VWAH-125KL | Linear | |
| 150 kΩ version | R-VWAH-150KL | Linear | |
| 200 kΩ version | R-VWAH-200KL | Linear | |
| Tolerance | ± 20% | ||
| Total Rotational Angle | 300° ±5° | ||
| Total Shaft Length | 35 mm | ||
| Washer I.D. | 10.3 mm | ||
| Washer O.D. | 17.5 mm | ||
| Withstand Voltage | 500 VAC for 1 min. |
| Packaging Dimensions | 1.9 in. × 1.3 in. × 1 in. | |
| Weight (Packaging) | 0.066 lbs. |
Files
| Specification Sheet for 100 kΩ | R-VWAH-POT |
| Specification Sheet for 125 kΩ | R-VWAH-125KL |
| Specification Sheet for 150 kΩ | R-VWAH-150KL |
| Specification Sheet for 200 kΩ | R-VWAH-200KL |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By John Caleb Ramm
Date: September 08, 2023
Perfect for a vintage replacement.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Marc Silva
Date: July 20, 2023
I needed a replacement pot for my wha pedal and this one works well.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Ronald Moore
Date: October 22, 2022
Excellent. Fixed my old Dunlop Crybaby in minutes. Thanks!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Kim Larkin
Date: June 18, 2022
The pot is simple and works. No need to buy the high dollar alternatives. My only concern is the gear needs to be longer or adjustable on the pot shaft as it only contacts about half of the wah rack. It is held with a roll pin and you cannot move it. It works fine though and fits as well as original. The quality seems good also.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Jason crisp
Date: March 08, 2022
Thomas organ wah or vintage crybaby
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Paul
Date: February 26, 2022
I like the taper it's more like the old Hot Potz1. I didn't like the Hot Potz 2 that was in my Crybaby so I dropped this in. I had to remove the large star washer on the rack guide and replace it with a smaller split washer to be able to adjust the gear mesh. The gear is slightly larger than the one on my Hot Potz 2. It's no big deal to install, I'm not sure what the negative reviews where about. Not sure how long it will last but at least it's not $30....
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]