0 reviews
Be the first to review this item!
CRL 616 3/8" Spearpoint Glass Drill, Price/Each
Brand CR Laurence
Shop more from BCR
* Click "Add to Cart" to calculate shipping and delivery time.
Product Description
Price is for Each.
Manufacturer Part Number: 616
For Use with Low RPM Drilling Machines
Available Sizes from 1/8" to 1/2" (3.2 to 12.7 mm)
Works with CRL2, SDM4 or Regular Power Drills
This CRL Spearpoint Glass Drill meets your demand for a low priced, reliable glass drill. The diamond-lapped, spade-shaped tip will drill many smooth holes in glass, vitrolite, china, ceramic, tile, etc. You can use this drill with hand held, low RPM drilling machines.
Capable of drilling holes very fast, this drill is easy-to-use, and will give you extended service life. You can conveniently use the CRL Spearpoint Drill in models such as CRL2, SDM4, and 41 Glass Drilling Machines, but it works best in a regular power drill. When working with these drills, be sure to keep the drill cool by using a lubricant, such as our Cat. No. PGT1 Turpentine.
NOTE: Always wear the proper safety gear, including gloves and eye protection, when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter, such as CRL Cat. No. GF1, must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Product Warning:
Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
- Drill Bit Size (Inches): 3/8
- Glazing Thickness (Inches): 1/8 To 1/2
- Shank Diameter (Inches): 15/64
- Shank Type: Round
- Speed (RPM): 400-800
- Works On: CRL2 And SDM4
For Use with Low RPM Drilling Machines
Available Sizes from 1/8" to 1/2" (3.2 to 12.7 mm)
Works with CRL2, SDM4 or Regular Power Drills
This CRL Spearpoint Glass Drill meets your demand for a low priced, reliable glass drill. The diamond-lapped, spade-shaped tip will drill many smooth holes in glass, vitrolite, china, ceramic, tile, etc. You can use this drill with hand held, low RPM drilling machines.
Capable of drilling holes very fast, this drill is easy-to-use, and will give you extended service life. You can conveniently use the CRL Spearpoint Drill in models such as CRL2, SDM4, and 41 Glass Drilling Machines, but it works best in a regular power drill. When working with these drills, be sure to keep the drill cool by using a lubricant, such as our Cat. No. PGT1 Turpentine.
NOTE: Always wear the proper safety gear, including gloves and eye protection, when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter, such as CRL Cat. No. GF1, must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Product Warning:
Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Return Policy
Return could only be applied within 7 days after delivery.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category