skip to footer block
BCR CRL B0CBR58 Black 5/8" x 1400' Open Cell Backer Rod P13950596BCR-B0CBR58 https://cdnimages.opentip.com/full/BCR/BCR-B0CBR58.jpg CRL B0CBR58 Black 5/8" x 1400' Open Cell Backer Rod Manufacturer Part Number: B0CBR58 Open Cell, No Skin, Non-Gassing Rod is Compatible with All Cold-Applied SealantsControls Depth of Sealant and Acts as a Bond BreakerSoft, Black Color Rod Compresses EasilyCRL Open Cell Backer Rod is soft, round, and easily compressible open cell polyurethane foam. Open Cell Backer Rod is not adversely affected by dynamic joint movement, and its inherent flexibility applies itself to joint variations very easily. It is ideal for use in situations where joint damage has occurred. It eliminates potential sealant failures due to out gassing that occurs when the \"skin\" of closed cell backer rod is punctured. The black color helps to disguise the backer rod in certain joint applications. CRL Open Cell Backer Rod can be used in temperatures from -65° to 400°F (-54° to 204°C). It is highly recommended for use with high performance sealants such as silicones and urethanes. CRL Open Cell Backer Rod should be used only in vertical and horizontal wall joints. It is not suitable for horizontal traffic joint surfaces like pavement joints.Rod Diameter:5/8\" (16 mm)Case Length:1400\' (426 m)Minimum Order:1 CaseProper size selection of CRL Open Cell Backer Rod is important as it controls the depth of the sealant bead. It must be oversized (50%) to fit tightly into the joint, and function as a bond breaker to prevent bottom-side adhesion of the sealant.New joints must be cleaned thoroughly, removing any concrete form-release agents, curing compound residue, or any other foreign materials. To ensure a good sealant bond, joints must be clean and dry when the sealant is installed. If old joints are being repaired, all old sealant or filler must be removed. Wire brushing and air blasting are very effective in removing old caulk residues. If an air compressor is used, it must be equipped with traps for the removal of oil and moisture.After measuring the joint size and choosing the applicable backer rod, install the backer rod at the depth recommended by the sealant manufacturer. The depth that the rod is inserted into the joint should allow the sealant to form a \"hourglass\" shape. This is the optimum shape factor for prolonging the service life of the sealant. The backer rod must be installed with a blunt tool or roller. The T607CU605 CRL Backer Rod Insert Tool Set, is designed specifically for the smooth installation of backer rod. Packaged on easy to unroll spools and shipped in boxes not bags.Not suitable for horizontal traffic joints. Use only in vertical wall joints. Do not use with hot applied sealants. Any questions regarding sealant compatibility should be confirmed with the sealant manufacturer. 13950596 27.2400lbs 0.00 0.00 0.00
CR Laurence
496.51 2025-07-14 64 In Stock
CRL B0CBR58 Black 5/8" x 1400' Open Cell Backer Rod, Price/Case

CRL B0CBR58 Black 5/8" x 1400' Open Cell Backer Rod, Price/Case

Brand CR Laurence
Shop more from BCR

SKU: BCR-B0CBR58
Price: $496.51
Buy in bulk & save 23% ($382.90 each)
Quantity:
64 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $496.51 ea X 1 qty = $496.51
Quantity Price Save
1+ $496.51 0%
10+ $427.34 14%
20+ $382.90 23%
This item is excluded from use of other offer, discount or coupon.

Product Description

Price is for Case.

Manufacturer Part Number: B0CBR58

  • Open Cell, No Skin, Non-Gassing Rod is Compatible with All Cold-Applied Sealants
  • Controls Depth of Sealant and Acts as a Bond Breaker
  • Soft, Black Color Rod Compresses Easily


  • CRL Open Cell Backer Rod is soft, round, and easily compressible open cell polyurethane foam. Open Cell Backer Rod is not adversely affected by dynamic joint movement, and its inherent flexibility applies itself to joint variations very easily. It is ideal for use in situations where joint damage has occurred. It eliminates potential sealant failures due to out gassing that occurs when the "skin" of closed cell backer rod is punctured. The black color helps to disguise the backer rod in certain joint applications. CRL Open Cell Backer Rod can be used in temperatures from -65° to 400°F (-54° to 204°C). It is highly recommended for use with high performance sealants such as silicones and urethanes. CRL Open Cell Backer Rod should be used only in vertical and horizontal wall joints. It is not suitable for horizontal traffic joint surfaces like pavement joints.



    Proper size selection of CRL Open Cell Backer Rod is important as it controls the depth of the sealant bead. It must be oversized (50%) to fit tightly into the joint, and function as a bond breaker to prevent bottom-side adhesion of the sealant.

    New joints must be cleaned thoroughly, removing any concrete form-release agents, curing compound residue, or any other foreign materials. To ensure a good sealant bond, joints must be clean and dry when the sealant is installed. If old joints are being repaired, all old sealant or filler must be removed. Wire brushing and air blasting are very effective in removing old caulk residues. If an air compressor is used, it must be equipped with traps for the removal of oil and moisture.

    After measuring the joint size and choosing the applicable backer rod, install the backer rod at the depth recommended by the sealant manufacturer. The depth that the rod is inserted into the joint should allow the sealant to form a "hourglass" shape. This is the optimum shape factor for prolonging the service life of the sealant. The backer rod must be installed with a blunt tool or roller. The T607CU605 CRL Backer Rod Insert Tool Set, is designed specifically for the smooth installation of backer rod. Packaged on easy to unroll spools and shipped in boxes not bags.

    Not suitable for horizontal traffic joints. Use only in vertical wall joints. Do not use with hot applied sealants. Any questions regarding sealant compatibility should be confirmed with the sealant manufacturer.

    warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

    Return Policy

    Return could only be applied within 7 days after delivery.
    Need more information?
    Our staff are available to answer any questions you may have about this item


    Look Similar Items By Category


    Customer Reviews
    0 reviews
    Be the first to review this item!