0 reviews
Be the first to review this item!
CRL CRL7670 Diamond Style Spindle 8.5 Lb. Exterior 105° Hold Open Retrofit Overhead Concealed Closer Body Only, Price/Each
Brand CR Laurence
Shop more from BCR
* Click "Add to Cart" to calculate shipping and delivery time.
Product Description
Price is for Each.
Manufacturer Part Number: CRL7670
Spindle Set in the Diamond Position at 0°
Replace Existing Pre-1998 Original Kawneer® Husky® Closers
5 Year Limited Warranty
UL Listed
This CRL Overhead Concealed Door Closer incorporates a spindle set in the diamond position, instead of a square position, at 0°. This enables door installers to replace existing pre-1998 Kawneer® original style Husky® Door Closers without the need to change the door arm, which requires a diamond pattern spindle engagement. With the addition of our Retrofit Clips for either 4" or 4-1/2" (102 or 114 mm) optional headers, the existing door closer can be replaced without the need to replace any additional door hardware. The existing Center-Hung or Offset Arms can be used, as well as the existing pivot.
These Overhead Concealed Door Closers are available in 105 degree Hold Open and No Hold Open styles, with Medium Spring Size, and an 8.5 lb. model for exterior door applications. A diamond pattern End-Load Center-Hung Replacement Arm, Cat. No. CRL8010H, is also available.
NOTE: May require considerable alterations to retrofit. Mounting Clips are sold separately and are required to mount Closer.
NOTE: An auxiliary floor or overhead door stop is recommended to prevent possible damage to both the door closer and entry way due to over-extension of maximum allowable door swing.
Independent Adjustment Valves
Non-Critical valve control adjusts both Closing Speed and Latching Speed independent of each other.
Special Retaining Rings
Prevent the Adjustment Valve Screws from being backed all the way out of the Door Closer Body.
NOTE: Although Series Door Closers comply with specified opening forces, they might not provide adequate spring power to control and close the door due to varying site conditions and door size.
Product Warning:
Closers set to comply with specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size. This Closer is not to be used for doors weighing in excess of 200 Lbs. (91 Kg) or wider than 36" (914 mm). Kawneer® is a registered trademark of Alcoa Inc., and its subsidiaries and affiliates.
- Americans with Disabilities Act (ADA) Compliant: Yes
- Body Height (Inches): 1-11/16
- Body Length (Inches): 11-5/8
- Body Width (Inches): 3-11/16
- Case Quantity: 6
- Closer Type: Overhead Concealed
- Door Height (Inches): 96
- Handing: Double Acting
- Hold Open: 105°
- Includes: CRL8010FS
- Maximum Door Weight (Pounds): 200
- Maximum Door Width - Exterior: 36 Inches
- Maximum Door Width - Interior: 36 Inches
- Recommended Door Type: Aluminum, Hollow Metal
- Retrofit Closer: Kawneer Husky
- Spindle Length (Inches): 1/2
- Spring Size: 8.5
- UL Listed: Yes
Spindle Set in the Diamond Position at 0°
Replace Existing Pre-1998 Original Kawneer® Husky® Closers
5 Year Limited Warranty
UL Listed
This CRL Overhead Concealed Door Closer incorporates a spindle set in the diamond position, instead of a square position, at 0°. This enables door installers to replace existing pre-1998 Kawneer® original style Husky® Door Closers without the need to change the door arm, which requires a diamond pattern spindle engagement. With the addition of our Retrofit Clips for either 4" or 4-1/2" (102 or 114 mm) optional headers, the existing door closer can be replaced without the need to replace any additional door hardware. The existing Center-Hung or Offset Arms can be used, as well as the existing pivot.
These Overhead Concealed Door Closers are available in 105 degree Hold Open and No Hold Open styles, with Medium Spring Size, and an 8.5 lb. model for exterior door applications. A diamond pattern End-Load Center-Hung Replacement Arm, Cat. No. CRL8010H, is also available.
NOTE: May require considerable alterations to retrofit. Mounting Clips are sold separately and are required to mount Closer.
NOTE: An auxiliary floor or overhead door stop is recommended to prevent possible damage to both the door closer and entry way due to over-extension of maximum allowable door swing.
Independent Adjustment Valves
Non-Critical valve control adjusts both Closing Speed and Latching Speed independent of each other.
Special Retaining Rings
Prevent the Adjustment Valve Screws from being backed all the way out of the Door Closer Body.
NOTE: Although Series Door Closers comply with specified opening forces, they might not provide adequate spring power to control and close the door due to varying site conditions and door size.
Product Warning:
Closers set to comply with specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size. This Closer is not to be used for doors weighing in excess of 200 Lbs. (91 Kg) or wider than 36" (914 mm). Kawneer® is a registered trademark of Alcoa Inc., and its subsidiaries and affiliates.
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Return Policy
Return could only be applied within 7 days after delivery.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category