skip to footer block
BCR CRL CRL7770 Diamond Style Spindle Medium Duty 105° Hold Open Retrofit Overhead Concealed Closer Body Only P13931018BCR-CRL7770 https://cdnimages.opentip.com/full/BCR/BCR-CRL7770.jpg CRL CRL7770 Diamond Style Spindle Medium Duty 105° Hold Open Retrofit Overhead Concealed Closer Body Only Manufacturer Part Number: CRL7770 Spindle Set in the Diamond Position at 0ºReplace Existing Pre-1998 Original Kawneer® Husky® Closers5 Year Limited Warranty UL Listed Warranty Information and Cross Reference Chart AvailableThis CRL Overhead Concealed Door Closer incorporates a spindle set in the diamond position, instead of a square position, at 0º. This enables door installers to replace existing pre-1998 Kawneer® original style Husky® Door Closers without the need to change the door arm, which requires a diamond pattern spindle engagement. With the addition of our Retrofit Clips for either 4\" or 4-1/2\" (102 or 114 mm) optional headers, the existing door closer can be replaced without the need to replace any additional door hardware. The existing Center-Hung or Offset Arms can be used, as well as the existing pivot.Spring Size:MediumHold Open:105ºDoor Size (Width):31\" to 41\" (787 mm to 1.04 m)Shipping Weight:10 lb (4.54kg)Case Qty:6Minimum Order:1 EachThese Overhead Concealed Door Closers are available in 105º Hold Open and No Hold Open styles, with Medium Spring Size, and an 8.5 lb. model for A.D.A. exterior door applications. A diamond pattern End-Load Center-Hung Replacement Arm, Cat. No. CRL8010H, is also available.NOTE: May require considerable alterations to retrofit. Mounting Clips are sold separately and are required to mount Closer.NOTE: An auxiliary floor or overhead door stop is recommended to prevent possible damage to both the door closer and entry way due to over-extension of maximum allowable door swing.Independent Adjustment ValvesNon-Critical valve control adjusts both Closing Speed and Latching Speed independent of each other.Special Retaining RingsPrevent the Adjustment Valve Screws from being backed all the way out of the Door Closer Body.Closers set to comply with A.D.A. specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size. Kawneer® is a registered trademark of Alcoa Inc., and its subsidiaries and affiliates. 13931018 10.0000lbs 0.00 0.00 0.00
CR Laurence
131.99 2025-07-06 94 In Stock

CRL CRL7770 Diamond Style Spindle Medium Duty 105° Hold Open Retrofit Overhead Concealed Closer Body Only, Price/Each

Brand CR Laurence
Shop more from BCR

SKU: BCR-CRL7770
Price: $131.99
Buy in bulk & save 32% ($89.57 each)
Quantity:
94 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $131.99 ea X 1 qty = $131.99
Quantity Price Save
1+ $131.99 0%
6+ $113.00 14%
48+ $89.57 32%
This item is excluded from use of other offer, discount or coupon.

Product Description

Price is for Each.

Manufacturer Part Number: CRL7770

  • Spindle Set in the Diamond Position at 0º
  • Replace Existing Pre-1998 Original Kawneer® Husky® Closers
  • 5 Year Limited Warranty UL Listed Warranty Information and Cross Reference Chart Available


  • This CRL Overhead Concealed Door Closer incorporates a spindle set in the diamond position, instead of a square position, at 0º. This enables door installers to replace existing pre-1998 Kawneer® original style Husky® Door Closers without the need to change the door arm, which requires a diamond pattern spindle engagement. With the addition of our Retrofit Clips for either 4" or 4-1/2" (102 or 114 mm) optional headers, the existing door closer can be replaced without the need to replace any additional door hardware. The existing Center-Hung or Offset Arms can be used, as well as the existing pivot.



    These Overhead Concealed Door Closers are available in 105º Hold Open and No Hold Open styles, with Medium Spring Size, and an 8.5 lb. model for A.D.A. exterior door applications. A diamond pattern End-Load Center-Hung Replacement Arm, Cat. No. CRL8010H, is also available.

    NOTE: May require considerable alterations to retrofit. Mounting Clips are sold separately and are required to mount Closer.

    NOTE: An auxiliary floor or overhead door stop is recommended to prevent possible damage to both the door closer and entry way due to over-extension of maximum allowable door swing.

    Independent Adjustment Valves
    Non-Critical valve control adjusts both Closing Speed and Latching Speed independent of each other.

    Special Retaining Rings
    Prevent the Adjustment Valve Screws from being backed all the way out of the Door Closer Body.

    Closers set to comply with A.D.A. specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size. Kawneer® is a registered trademark of Alcoa Inc., and its subsidiaries and affiliates.

    warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

    Return Policy

    Return could only be applied within 7 days after delivery.
    Need more information?
    Our staff are available to answer any questions you may have about this item


    Look Similar Items By Category


    Customer Reviews
    0 reviews
    Be the first to review this item!