BCR CRL Double Roller Laguna Series Wall Mount Bi Parting Slider with Softbrake Kit P14188325BCR-LSWM28BS https://cdnimages.opentip.com/full/BCR/BCR-LSWM28BS.jpg CRL Double Roller Laguna Series Wall Mount Bi Parting Slider with Softbrake Kit Manufacturer Part Number: LSWM28PS-P This Kit is Intended for Wall MountingSoftbrake Braking System Controls Door ClosingImproved Anti-Lift Double Roller Design Assembly Contains All Necessary Hardware to Complete the Installation With 3/8\" or 1/2\" (10 or 12 mm) Tempered Glass Alloy 316 Stainless Steel Construction Spanner Wrench for Installation Sold SeparatelyThe CRL Double Roller Laguna Series Wall Mount Bi-Parting Slider with Softbrake Kit contains all the components you will need (except the tempered glass) to complete the installation. The Softbrake braking system helps to control the last 2-1/4\" (57 mm) of travel. This model is used in applications where you are attaching two bi-parting sliding doors to the inside face of a sufficiently reinforced wall.Catalog Number:LSWM28BSColor:Brushed StainlessShip Via:No UPS - Common Carrier OnlyMinimum Order:1 EachThe Anti-Lift Sliding Door Top Rollers can be attached to the glass with either Surface Mount or Flush Mount Fittings (both are supplied). The Rollers have a 1/8\" (3 mm) up or down vertical adjustment to aid in door alignment. This system should only be used with 3/8\" or 1/2\" (10 or 12 mm) tempered glass. Laminated glass cannot be used.DOOR SYSTEM LIMITATIONS:Maximum Door Weight: 220 Lbs. (100 kg)Minimum Door Width: 37-13/16\" (960 mm)Maximum Door Width: 53-9/16\" (1.36 m)Maximum Door Height: 98-7/16\" (2.50 m)Maximum Track Length: 104\" (2.64 m)STRUCTURAL DISCLAIMER - All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures. 14188325 167.0000lbs 0.00 0.00 0.00

CR Laurence

2135.73 2025-07-18 21 In Stock CRL Double Roller Laguna Series Wall Mount Bi Parting Slider with Softbrake Kit

CRL LSWM28BS Brushed Stainless Double Roller Laguna Series Wall Mount Bi-Parting Slider with Softbrake Kit

Brand CR Laurence

Shop more from BCR

SKU: BCR-LSWM28PS-P

Price: $2,135.73

Buy in bulk & save 14% ($1,830.62 each)

Finish:

Quantity:

21 In Stock

BRUSHED STAINLESS	- + Stock: 21 $2135.73
MATTE BLACK	- + Out of stock$2419.19
POLISHED STAINLESS	- + Out of stock$2283.09

Qty
Price

1+
$2,135.73

6+
$1,830.62

* Shipping Note: Usually ships within 1 to 2 weeks.

* Click "Add to Cart" to calculate shipping and delivery time.

Share & Earn 10% Cash Back Best Price in Bulk

Best Price in Bulk!

Because we are a major distributor for some products, we price very aggressively by sacrificing profit margin whenever we sell in bulk. The philosophy to offer quality products with little mark up has created unmatched customer loyalty for some successful membership based stores. Unlike those wholesale to public membership clubs, we do not charge any membership fee. Some merchants offer FREE shipping, but when you buy quantity 10, you pay 10 times total. Essentially, you are paying 10 times on shipping. We don't think that is fair to you. Why? Most of the time, shipping a 10 lb parcel does not cost 10 times of a 1 lb parcel.

Here is an example:

Opentip	Others
Product Price: $8	Product Price: $20
Shipping for quantity 1: $12	Shipping: FREE
Quantity: 10	Quantity: 10
Total Shipping for quantity 10: $18	Total Shipping: FREE
Subtotal: $98 Saving: $102 (51%)	Subtotal: $200

Don't be shy. If you discover any competitor outselling us in a particular product, whenever you purchase in large quantity, please bring it to our attention. Most of the time, we will match or beat their price, and give you a credit. If we lose to a competitor, it is our shame. We then know we need to work harder in sourcing to create values for you.

* Price comparison must be based on comparable brands or models and in bulk quantity purchase.

* Price: $2,135.73 ea X 1 qty = $2,135.73

Quantity	Price	Save
1+	$2,135.73	0%
6+	$1,830.62	14%

* This item is excluded from use of other offer, discount or coupon.

Optional related products

CRL Double Roller Laguna Series Wall Mount Bi-Parting Slider Kit

$1,668.24

CRL Stainless Double Roller Laguna Series Wall Mount Single Slider...

$1,067.45

CRL Double Roller Laguna Series Wall Mount Single Slider Kit

$896.03

CRL Laguna Series Wall Mount Bi-Parting Slider Kit

$1,360.15

CRL Laguna Series Wall Mount Bi-Parting Slider with Softbrake Kit

$1,848.51

CRL Double Roller Laguna Series Glass Mount Single Slider Kit

$988.83

CRL Stainless Laguna Series Wall Mount Single Slider Kit

$769.73

CRL Laguna Series Wall Mount Single Slider with Softbrake Kit

$883.56

CRL Laguna Series Glass Mount Single Slider Kit

$895.28

CRL50 Series Bi-Parting Synchronized Ceiling Mount Kit

$1,963.32

CRL Laguna Series Top Sliding Tube with End Caps

$199.90

CRL 42" 200 300 350 and 400 Series 90 Degree Inside Fascia Mounted...

$216.90

CRL 100 Series 48" Surface Mount Post Kit

$135.21

CRL 200 300 350 and 400 Series 48" 135 Degree Surface Mount Post Kit

$88.21

Product Description

Manufacturer Part Number: LSWM28PS-P

This Kit is Intended for Wall Mounting

Softbrake Braking System Controls Door Closing

Improved Anti-Lift Double Roller Design Assembly Contains All Necessary Hardware to Complete the Installation With 3/8" or 1/2" (10 or 12 mm) Tempered Glass Alloy 316 Stainless Steel Construction Spanner Wrench for Installation Sold Separately

The CRL Double Roller Laguna Series Wall Mount Bi-Parting Slider with Softbrake Kit contains all the components you will need (except the tempered glass) to complete the installation. The Softbrake braking system helps to control the last 2-1/4" (57 mm) of travel. This model is used in applications where you are attaching two bi-parting sliding doors to the inside face of a sufficiently reinforced wall.

Catalog Number:

LSWM28BS

Color:

Brushed Stainless

Ship Via:

No UPS - Common Carrier Only

Minimum Order:

1 Each

The Anti-Lift Sliding Door Top Rollers can be attached to the glass with either Surface Mount or Flush Mount Fittings (both are supplied). The Rollers have a 1/8" (3 mm) up or down vertical adjustment to aid in door alignment. This system should only be used with 3/8" or 1/2" (10 or 12 mm) tempered glass. Laminated glass cannot be used.

DOOR SYSTEM LIMITATIONS:
Maximum Door Weight: 220 Lbs. (100 kg)
Minimum Door Width: 37-13/16" (960 mm)
Maximum Door Width: 53-9/16" (1.36 m)
Maximum Door Height: 98-7/16" (2.50 m)
Maximum Track Length: 104" (2.64 m)

STRUCTURAL DISCLAIMER - All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures.

This item is overweight. we may contact you when we process the order.

Attention CA Residents: Prop 65 Warning

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.