BCR CRL Mill Aluminum 118 1/8" L25S Series Standard Square Base Shoe Drilled with 13/16" Holes "D" Pattern P14186858BCR-L25S10D6 https://cdnimages.opentip.com/full/BCR/BCR-L25S10D6.jpg CRL Mill Aluminum 118 1/8" L25S Series Standard Square Base Shoe Drilled with 13/16" Holes "D" Pattern Manufacturer Part Number: L25S10D-P For 1-1/16\" (25.52 mm) Laminated Tempered Glass (12 x 1.52 x 12 mm) Drilled and Counter Bored 11-13/16\" (300 mm) Center-to-Center, or We Will Custom Drill to Your Specifications Typically Used as the Base Channel for Glass Railing Systems or Windscreens Works with LTL10X TAPER-LOC® Taper Sets Engineering Reports Available CRL Recommends Consulting with the Glass Fabricator Prior to Wet Setting Laminated Tempered Glass CRL Glass Railing Systems Meets NBC Load Requirements When Installed in Accordance to ICC-3842 The CRL L25S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available. Catalog Number: L25S10D Stock Length: 118-1/8\" (3 m) Hole Size: 13/16\" (20.6 mm) Counter Bore x Depth Holes Drilled C.T.C. : 1-1/4\" (31.7 mm) x 1/2\" (12.7 mm) 11-13/16\" (300 mm) Ship Via: No UPS - Common Carrier Only Shipping Weight: 102.83 lb (46.64kg) Minimum Order: 1 Each GLASS SPECIFICATIONS: For use with 1-1/16\" (25.52 mm) Laminated Tempered Glass 1/2\" x .060 x 1/2\" (12 mm x 1.52 mm x 12 mm) Thickness Range: 0.960\" to 1.060\" (24.40 to 26.92 mm) Will work with ASTM 1\" (25.4 mm) Monolithic Tempered Glass Will not accommodate the full ASTM thickness range for 1-1/16\" (27 mm) glass CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method.All pre-drilled CRL Base Shoes have a +1/8 (3mm) / -1/16 (1.5mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate. 14186858 290.0000lbs 0.00 0.00 0.00

CR Laurence

948.27 2025-10-15 61 In Stock CRL Mill Aluminum 118 1/8" L25S Series Standard Square Base Shoe Drilled with 13/16" Holes "D" Pattern

CRL L25S10D6 Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Drilled with 13/16" Holes Pattern "D"

Brand CR Laurence

Shop more from BCR

SKU: BCR-L25S10D-P

Price: $948.27

Buy in bulk & save 11% ($842.91 each)

Finish:

Quantity:

61 In Stock

"D" PATTERN	- + Stock: 499 $981.87
PATTERN "D"	- + Stock: 61 $948.27

Qty
Price

1+
$948.27

6+
$842.91

* Shipping Note: Usually ships within 1 to 2 weeks.

* Click "Add to Cart" to calculate shipping and delivery time.

Share & Earn 10% Cash Back Best Price in Bulk

Best Price in Bulk!

Because we are a major distributor for some products, we price very aggressively by sacrificing profit margin whenever we sell in bulk. The philosophy to offer quality products with little mark up has created unmatched customer loyalty for some successful membership based stores. Unlike those wholesale to public membership clubs, we do not charge any membership fee. Some merchants offer FREE shipping, but when you buy quantity 10, you pay 10 times total. Essentially, you are paying 10 times on shipping. We don't think that is fair to you. Why? Most of the time, shipping a 10 lb parcel does not cost 10 times of a 1 lb parcel.

Here is an example:

Opentip	Others
Product Price: $8	Product Price: $20
Shipping for quantity 1: $12	Shipping: FREE
Quantity: 10	Quantity: 10
Total Shipping for quantity 10: $18	Total Shipping: FREE
Subtotal: $98 Saving: $102 (51%)	Subtotal: $200

Don't be shy. If you discover any competitor outselling us in a particular product, whenever you purchase in large quantity, please bring it to our attention. Most of the time, we will match or beat their price, and give you a credit. If we lose to a competitor, it is our shame. We then know we need to work harder in sourcing to create values for you.

* Price comparison must be based on comparable brands or models and in bulk quantity purchase.

* Price: $948.27 ea X 1 qty = $948.27

Quantity	Price	Save
1+	$948.27	0%
6+	$842.91	11%

* This item is excluded from use of other offer, discount or coupon.

Optional related products

CRL 1/16" x Shimstack Shims

$84.00

CRL 8" RM Series Flat Outside Surface/Round Tubing Inside...

$105.29

CRL Z734BS Brushed Stainless Z-Series Radius Surface Mount Square...

$30.77

CRL Medium Duty 90° Hold Open Overhead Concealed Closer with...

$145.59

CRL Black Flexible Rubber LR20 Series Cap Rail Insert for mm...

$390.11

CRL 15" Plate with 6" Round Solid Handle Pull

$93.59

CRL 3/4" x 5/16" Extruded Screen Frame

$29.24

CRL Black Flexible Rubber LR25 Series Cap Rail Insert for mm...

$415.53

CRL 3/4" x 7/16" Extruded Screen Frame

$33.79

CRL U-Channel with Roll-In Top Load Gasket

$186.30

CRL 6" Polished RM Series Flat Outside Surface/Round Tubing Inside...

$102.69

CRL "Perfect Fit" Three-Panel Tri-Vent with Glass for 1997+ Dodge...

$502.46

CRL Tri-Vent Three Panel Slider with Glass for 1998+ Nissan Frontier

$336.74

CRL Medium Duty Hold Open Overhead Concealed Closer with "A" End-Load...

$145.59

Product Description

Manufacturer Part Number: L25S10D-P

For 1-1/16" (25.52 mm) Laminated Tempered
Glass (12 x 1.52 x 12 mm) Drilled and Counter Bored 11-13/16"
(300 mm) Center-to-Center, or We Will
Custom Drill to Your Specifications

Typically Used as the Base Channel for
Glass Railing Systems or Windscreens

Works with LTL10X TAPER-LOC® Taper Sets Engineering Reports Available CRL Recommends Consulting with the Glass
Fabricator Prior to Wet Setting
Laminated Tempered Glass

CRL Glass Railing Systems Meets
NBC Load Requirements When Installed
in Accordance to ICC-3842

The CRL L25S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.

Catalog Number: L25S10D

Stock Length: 118-1/8" (3 m)

Hole Size: 13/16" (20.6 mm)

Counter Bore x Depth
Holes Drilled C.T.C. : 1-1/4" (31.7 mm) x 1/2" (12.7 mm)
11-13/16" (300 mm)

Ship Via: No UPS - Common Carrier Only

Shipping Weight: 102.83 lb (46.64kg)

Minimum Order: 1 Each

GLASS SPECIFICATIONS:
For use with 1-1/16" (25.52 mm) Laminated Tempered Glass 1/2" x .060 x 1/2" (12 mm x 1.52 mm x 12 mm)
Thickness Range: 0.960" to 1.060" (24.40 to 26.92 mm) Will work with ASTM 1" (25.4 mm) Monolithic Tempered Glass Will not accommodate the full ASTM thickness range for 1-1/16" (27 mm) glass

CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method.All pre-drilled CRL Base Shoes have a +1/8 (3mm) / -1/16 (1.5mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.

This item is overweight. we may contact you when we process the order.

Attention CA Residents: Prop 65 Warning

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.