skip to footer block
BCR CRL PD9 Diamond Point Driver for #1 Points P13934795BCR-PD9 https://cdnimages.opentip.com/full/BCR/BCR-PD9.jpg CRL PD9 Diamond Point Driver for #1 Points Manufacturer Part Number: PD9 All Metal DesignDrives 5/16\" (No. 1) Diamond PointsAdjustable Strike ForceThe best and fastest way to glaze wood sash is to start off with a CRL PD9 Diamond Point Driver. Secure the glass in place with CRL No. 1 Diamond Points and warm up the putty. Adjustable strike force allows the user to drive the points deeply enough in hard or softwood frames to hold the glass with 1/8\" (3.2 mm) of exposure over the glass. This low profile is easily covered during putty application.Minimum Order:1 EachThe CRL PD9 is built with small rubber cushions on the base to make sure tool is perfectly angled to properly set the points.Unit only accepts CRL 1P, 1B, and NW1P points. The bottom of the PD9 Point Driver must be held in flat contact with the glass or mat surface when fired. Failure to do so will result in Points dropping through the bottom of the driver when the trigger is activated. 13934795 6.3000lbs 0.00 0.00 0.00
CR Laurence
296.39 2025-07-05 197 In Stock

CRL PD9 Diamond Point Driver for #1 Points, Price/Each

Brand CR Laurence
Shop more from BCR

SKU: BCR-PD9
Price: $296.39
Buy in bulk & save 12% ($261.95 each)
Quantity:
197 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $296.39 ea X 1 qty = $296.39
Quantity Price Save
1+ $296.39 0%
5+ $261.95 12%
This item is excluded from use of other offer, discount or coupon.

Product Description

Price is for Each.

Manufacturer Part Number: PD9

  • All Metal Design
  • Drives 5/16" (No. 1) Diamond Points
  • Adjustable Strike Force


  • The best and fastest way to glaze wood sash is to start off with a CRL PD9 Diamond Point Driver. Secure the glass in place with CRL No. 1 Diamond Points and warm up the putty. Adjustable strike force allows the user to drive the points deeply enough in hard or softwood frames to hold the glass with 1/8" (3.2 mm) of exposure over the glass. This low profile is easily covered during putty application.



    The CRL PD9 is built with small rubber cushions on the base to make sure tool is perfectly angled to properly set the points.

    Unit only accepts CRL 1P, 1B, and NW1P points. The bottom of the PD9 Point Driver must be held in flat contact with the glass or mat surface when fired. Failure to do so will result in Points dropping through the bottom of the driver when the trigger is activated.

    warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

    Return Policy

    Return could only be applied within 7 days after delivery.
    Need more information?
    Our staff are available to answer any questions you may have about this item


    Look Similar Items By Category


    Customer Reviews
    0 reviews
    Be the first to review this item!