skip to footer block
BCR CRL SDM4 Swivel Glass Drilling Machine P13941296BCR-SDM4 https://cdnimages.opentip.com/full/BCR/BCR-SDM4.jpg CRL SDM4 Swivel Glass Drilling Machine Manufacturer Part Number: SDM4 Drills Outlet Cut-Outs without RepositioningBuilt-in Retaining Ring1,000 RPM 110V AC MotorThis unique drilling machine was designed primarily to make cut-outs for plug and switch receptacles. The CRL Swivel Glass Drilling Machine has a suction cup base that also acts as a coolant retainer when drilling with diamond tube drills. Drill first hole, insert rubber plug, swivel drill head, and then drill second hole. Shipping Weight:14 lb (6.35kg)Can also be used for drilling larger holes with tube drills up to 6\" (152 mm) in diameter. Drill head has the unique ability to swing a full 360 degrees so drilling up close to the glass edge is made easy. This also lets you use drills larger in diameter than will fit in the built-in retaining ring. Machine is powered by a 1,000 RPM, 110V AC motor.Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury. 13941296 26.0000lbs 0.00 0.00 0.00
CR Laurence
1810.7900 2025-07-26 12 In Stock

CRL SDM4 Swivel Glass Drilling Machine, Price/Each

Brand CR Laurence
Shop more from BCR

SKU: BCR-SDM4
Price: $1,810.79
Quantity:
12 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for Each.

Manufacturer Part Number: SDM4

  • Drills Outlet Cut-Outs without Repositioning
  • Built-in Retaining Ring
  • 1,000 RPM 110V AC Motor


  • This unique drilling machine was designed primarily to make cut-outs for plug and switch receptacles. The CRL Swivel Glass Drilling Machine has a suction cup base that also acts as a coolant retainer when drilling with diamond tube drills. Drill first hole, insert rubber plug, swivel drill head, and then drill second hole.



    Can also be used for drilling larger holes with tube drills up to 6" (152 mm) in diameter. Drill head has the unique ability to swing a full 360 degrees so drilling up close to the glass edge is made easy. This also lets you use drills larger in diameter than will fit in the built-in retaining ring. Machine is powered by a 1,000 RPM, 110V AC motor.

    Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.

    warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

    Return Policy

    Return could only be applied within 7 days after delivery.
    Need more information?
    Our staff are available to answer any questions you may have about this item


    Look Similar Items By Category


    Customer Reviews
    0 reviews
    Be the first to review this item!