skip to footer block
BCR CRL Z412BR Brass Z Series Round Type Flat Base Zinc Clamp for 1/2" Glass P14555378BCR-Z412BR https://cdnimages.opentip.com/full/BCR/BCR-Z412BR.jpg CRL Z412BR Brass Z Series Round Type Flat Base Zinc Clamp for 1/2" Glass Manufacturer Part Number: Z412BRBase Type: FlatDepth (Inches): 1-7/32Finish: BrassGlazing Thickness (Inches): 1/2Height (Inches): 2-5/16Material: ZincProfile: RoundWidth (Inches): 2-1/8For 1/2\" (12 mm) Glass Replacement Gaskets are Available by Ordering Cat. No. Z12RGFor Use on Mezzanines, Partitions, Railings and Windbreaks Use Monolithic Tempered GlassSteel Pin Available for Additional Glass Support Our CRL Z-Series Round Type Radius Base Glass Clamps are designed to be used on glass thickness of 1/4\" up to 1/2\" (6 to 12 mm), and are available in either zinc or stainless steel. The clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.For securing the Z-Clamp to thin wall tubing (less than 1/8\"), use CRL\'s ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32\" (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16\" Mandrel and Nosepiece.NOTE: 1/2\" (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support.SPECIFICATIONS: Glass Thicknesses: Models for 1/4\" to 1/2\" (6 to 12 mm) Base Design: Flat For Use With:Square Tubing or Other Flat Surfaces. Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications. Glass Fabrication: For 1/4\" (6 mm), 5/16\" (8 mm), and 3/8\" (10 mm) Thick Glass: 1/2\" (12 mm) diameter hole required if using provided steel pin for glass support. For 1/2\" (12 mm) Thick Glass: 9/16\" (14 mm) diameter hole required if using provided steel pin for glass support. Includes: Rubber Gaskets and Steel Pin (for optional use) with GrommetProduct Warning:For interior CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.Installation InstructionsInstallation Instructions Z-Clamp-Tightening-Sequence.pdf 14555378 0.5900lbs 0.00 0.00 0.00
CR Laurence
29.46 2025-07-17 380 In Stock

CRL Z412BR Brass Z-Series Round Type Flat Base Zinc Clamp for 1/2" Glass, Price/Each

Brand CR Laurence
Shop more from BCR

SKU: BCR-Z412BR
Price: $29.46
Buy in bulk & save 46% ($15.92 each)
Quantity:
380 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $29.46 ea X 1 qty = $29.46
Quantity Price Save
1+ $29.46 0%
8+ $22.65 23%
24+ $19.00 36%
48+ $15.92 46%
This item is excluded from use of other offer, discount or coupon.

Product Description

Price is for Each.

Manufacturer Part Number: Z412BR

  • Base Type: Flat
  • Depth (Inches): 1-7/32
  • Finish: Brass
  • Glazing Thickness (Inches): 1/2
  • Height (Inches): 2-5/16
  • Material: Zinc
  • Profile: Round
  • Width (Inches): 2-1/8


For 1/2" (12 mm) Glass
Replacement Gaskets are Available by Ordering Cat. No. Z12RG
For Use on Mezzanines, Partitions, Railings and Windbreaks
Use Monolithic Tempered Glass
Steel Pin Available for Additional Glass Support
Our CRL Z-Series Round Type Radius Base Glass Clamps are designed to be used on glass thickness of 1/4" up to 1/2" (6 to 12 mm), and are available in either zinc or stainless steel. The clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.

For securing the Z-Clamp to thin wall tubing (less than 1/8"), use CRL's ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32" (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16" Mandrel and Nosepiece.NOTE: 1/2" (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support.SPECIFICATIONS:
Glass Thicknesses: Models for 1/4" to 1/2" (6 to 12 mm)
Base Design: Flat
For Use With:Square Tubing or Other Flat Surfaces.
Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
Glass Fabrication: For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm) Thick Glass: 1/2" (12 mm) diameter hole required if using provided steel pin for glass support. For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support.
Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet

Product Warning:

For interior CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

Installation Instructions



Installation Instructions Z-Clamp-Tightening-Sequence.pdf

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

Return could only be applied within 7 days after delivery.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!