0 reviews
Be the first to review this item!
Pricing Note
Product Description
Manufacturer Part Number: SDX10
The SDX10 is easily one of the finest 10" subwoofers on the market today. It features ultra-low distortion due to the patented XBL^2 motor, this allows you to hear every little detail of your favorite movie or song. You can look forward to low, impactful bass in a small enclosure with a generous 36 mm peak-to-peak Xmax
Key Features:
CSS SDX10 XBL2 Subwoofer
The SDX10 is easily one of the finest 10" subwoofers on the market today. It features ultra-low distortion due to the patented XBL^2 motor, this allows you to hear every little detail of your favorite movie or song. You can look forward to low, impactful bass in a small enclosure with a generous 36 mm peak-to-peak Xmax. The SDX10 also features good sensitivity and an excellent extended frequency response for 10" subwoofer, which means it can be used as a woofer in 3-way configurations.
The SDX10 is easily one of the finest 10" subwoofers on the market today. It features ultra-low distortion due to the patented XBL^2 motor, this allows you to hear every little detail of your favorite movie or song. You can look forward to low, impactful bass in a small enclosure with a generous 36 mm peak-to-peak Xmax
Key Features:
- Paper/carbon fiber blended cone, pressed and surface treated provides inherent internal damping
- Semi-progressive spider design gives increased linearity
- Aluminum and copper shorting rings inside the motor for reduced distortion
- High power, low inductance design XBL^2 motor
CSS SDX10 XBL2 Subwoofer
The SDX10 is easily one of the finest 10" subwoofers on the market today. It features ultra-low distortion due to the patented XBL^2 motor, this allows you to hear every little detail of your favorite movie or song. You can look forward to low, impactful bass in a small enclosure with a generous 36 mm peak-to-peak Xmax. The SDX10 also features good sensitivity and an excellent extended frequency response for 10" subwoofer, which means it can be used as a woofer in 3-way configurations.
Product Details | |
|---|---|
| Brand | CSS |
| Model | SDX10 |
| Part Number | 290-3004 |
| UPC | 848864053745 |
| Unit of Measure | Each |
| Weight | 18.65 |
Product Specifications | |
|---|---|
| Nominal Diameter | 10" |
| Moving Mass Of Diaphragm (Mmd) | 112 |
| Power Handling (RMS) | 750 Watts |
| Power Handling (MAX) | 1500 Watts |
| Impedance | 4Ω |
| Frequency Response | 16 to 500Hz |
| Sensitivity | 89dB 2.83V/1m |
| Voice Coil Diameter | 2.39" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 26Hz |
| DC Resistance (Re) | 3.5Ω |
| Voice Coil Inductance (Le) | 1.42mH |
| Mechanical Q (Qms) | 4 |
| Electromagnetic Q (Qes) | 0.47 |
| Total Q (Qts) | 0.42 |
| Compliance Equivalent Volume (Vas) | 1.87ft³ |
| BL Product (BL) | 11.8T·m |
| Maximum Linear Excursion (Xmax) | 18.4mm |
| Surface Area of Cone (Sd) | 330cm² |
Materials of Construction | |
|---|---|
| Cone Material | Paper / Carbon Fiber |
| Surround Material | Rubber |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 10.81" |
| Baffle Cutout Diameter | 9" |
| Depth | 6.69" |
| # Mounting Holes | 8 |
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) | |
|---|---|
| Sealed Volume | 0.56ft³ |
| Sealed F3 | 52.61Hz |
| Vented Volume | 1.69ft³ |
| Vented F3 | 27.12Hz |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item