5 out of 5
Customer Reviews
By
Rick stalker
Date: November 22, 2022
Works really well to hold you 3D Print. Release easy except a first few layer fail may be hard to remove.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By
Rdl
Date: November 21, 2022
this is ssssooooo much better than having to use clips. idk why they dont come this way out of the box from Creatily
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
pj
Date: November 17, 2022
This is an awesome plate im thinking of ordering another just to have! bed adhesion is easy to achieve the magnets stick well and align themselves just tape the magnet to the bed with the included adhesive and drop the mat on and you are good to go!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Stuart Michaels
Date: November 16, 2022
The adhesion was so good I'd worry I couldn't remove it if it wasn't flexible. Great product.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Hayden McCaffery
Date: November 10, 2022
I've bought one of these a year ago. They work splendidly for my ender 3s. The quality is great and they can last a year with heavy use. They are easy to install and fairly simple to use
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Mike Barrenger
Date: November 09, 2022
So much easier to remove parts from
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Corey stewart
Date: November 04, 2022
Working great and easy to clean and take off the prints
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Phoenix
Date: November 02, 2022
Once this is installed, it works great!Adhesion is great (though, I recommend using painters tape for PLA and some other filaments)Unfortunately, this installs like a cheap screen protector for a phoneYou have to stick a layer onto the metal bed, which will most likely get an air bubble underneath it when you do, and once its on its basically impossible to remove UNLESS you are willing to destroy it
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Ivan Youroff
Date: October 24, 2022
PLA just melts right into the surface, I don't have a better explanation why it's sooo hard to remove it. Especially if it's just the first layer of a cancelled print. I used to have a couple of the same magnetic covers and they are very different: weren't that sticky, and magnetic attachment was much stronger.
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By
Trey S.
Date: October 21, 2022
Couldn't remove skirt after my first print. Made of trash magnetic tape pretty much. Trash. Trash. Trash. I never write reviews EVER, but in hopes this stops even one person from wasting their time I decided to write it. DO NOT BUY.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Levi Smith
Date: October 07, 2022
I wanted to get away from the clips so liked the magnetic idea. That is definitely easier. But I originally went with the PEI plates as everyone seemed to say they were better. But for the life of me with 3 different PEI plates, textured, smoothed, etc. I can not get PLA to stick. I got maybe 3 things ever to stick and dozens of failures. I tried Z higher, lower, washing with dish soap, alcohol, roughing them up... No change. So got this original build surface and it's great. PLA just works every time(so far).
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Morgan Rae
Date: October 05, 2022
It works great! Now I did not get it for that exact 3D printer so I had to cut it down to fit mine. It works great though. Was super easy to stick it down. The top comes off with the print so easy. I am very happy I purchased this. Made it a lot easier for me. Just make sure if you're using it on a different 3D printer you raise the print job just a little so that it doesn't scrape this.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Lucas French
Date: October 04, 2022
Well worth the money. A way better set up than stock. Don't even need my puffy knife anymore. It also allows me to do multiple prints without having to retune the table
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Bruce B.
Date: October 03, 2022
While not an exact duplicate of what I had on my Ender 3's original matte, this is a good replacement and has worked very very well.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Tyler
Date: October 03, 2022
I've been using these for a year or so. Very easy to peel parts off.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
A Customer
Date: September 30, 2022
Why is the bottom of this sticky, I thought it was magnetic
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Michael
Date: September 29, 2022
The only positive thing I will say, is installing this was easy, sure. There is no screwing up the magnetic orientation. The sticky bottom half is very sticky and sticks well. That's the end of the good points.That's all pointless when it has UTTERLY TERRIBLE adhesion. My first print attempt with it, I monitored it the first hour and it seemed okay, even though the very first literal strands didn't didn't stick at all, but then it started sticking so I brushed it off. I left the room for about an hour and came back to this giant clog because it somehow decided to stop sticking and slide around. The engaged a clog. The clog ultimately overheated the printer head and killed my printer. YOU OWE ME A NEW PRINTER. After realizing the print stopped earlier than expected I came back in to a dead printer and discovered the clog and the print slid way away from where it was. I want my money back and a new printer.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Raydeeoh
Date: September 27, 2022
Works well, extra build plate for my Ender 3Pro.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Jason H.
Date: September 26, 2022
if you have a printer, and dont have one of these, stop reading and buy one. If you have one and are looking for reassurance, let me tell you that I had two other removable surfaces before this one and this has by far given me the best results. magnet is strong and holds very well. If kept clean, it adheres easily and no problems were encountered. I got about 100 large prints on one so far, and it keeps being awesome.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Daphne Walker
Date: September 24, 2022
Perfect for any printer
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]