5 out of 5
Customer Reviews
By
Robert
Date: May 13, 2022
Bought 3 of these. Ruined two. Figured it out on the third. Don't use PETG on this as it binds too well to the mat and undeveloped the mat when you take it off. As well make sure you turn the mat on the magnetic pad and it grips firmly before you stick the mat to the heat bed. Made this mistake twice. Since then works perfectly every time!
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By
LifeIsLiving
Date: May 12, 2022
Perfection
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Carlos Harvey Gutierrez Rodriguez
Date: May 03, 2022
con la ventaja de su fcil colocacin y retirada para los componentes impresos, es una buena alternativa, teniendo en cuenta que se van desgastando con el uso,
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Thomas Eckstadt
Date: May 01, 2022
For everyone that keeps reviewing that the magnet barely sticks... rotate the top layer 90 degrees and BLAM , it will stick strong. Magnets have polarity, once you rotate them to the proper orientation they will stick and not move during printing. Also, make sure to heat your bed before trying to remove the first couple of prints, when they are new, your prints will take some effort to remove until it breaks in...
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Joe Bagodonuts
Date: April 28, 2022
When I purchased the Ender 3 S1 printer, I didn't even realize that the top plate was actually a magnetic mat (I was new to 3D printing at the time). Anyway, this product is not as rigid (or magnetic) as the one that comes with the printer.That said, after re-leveling my printer, everything worked great.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
julian arsenio lopez baron
Date: April 26, 2022
I do like this bed to a point. I do have all the beds for different occasions that I print with so far, I use this for textures in the bottom layer.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Wyatt
Date: April 20, 2022
NOT THE OEM magnetic pad (I know the Ender isn't a high-end printer to begin with, but the magnetic plate cover it came with originally was excellent... this replacement is NOT). Warps and bubbles up when bed is heated, and the magnetic pull is very sub-par from the original magnetic build surface.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: April 20, 2022
The flexible/removable combo is genius. No more stabbing myself with the scraper!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
racin82988
Date: April 18, 2022
Ordered this to replace the glass plate and it has been a great add on for my printer. Easy to install; removal is very simple and keeps me from breaking my prints - especially the small and more fragile ones. Save yourself some misery and pick up one of these!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Eric moore
Date: April 18, 2022
I have an Ender 3 v2 with the glass plate and always struggled with adhesion and removal issues. This surface worked right out of the package using Reprapper PLA with no changes in temp setting (213/60) or need for a glue stick. The model peeled off easy.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
ERIC
Date: April 10, 2022
My green dot card which has a new number you guys keep using my old green dot card which has a different number on it
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
keith price
Date: April 03, 2022
replacement part, worked great
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Marcus
Date: April 01, 2022
perfect for PLA , PLA. PETG leaves stains.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Christopher Whitcomb
Date: April 01, 2022
All around great bed. Easy to remove prints 5 stars
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
xavier valdez
Date: March 31, 2022
It's way more convenient to use than the clip on build plate. I little tricky to align it properly when you're putting it back on but still preferable to dealing with those freaking binder clips.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
nana49
Date: March 31, 2022
I wanted to replace my original bed surface on an ender 3 pro and was led to believe I would need to peel off the adhesive portion in order to use a new magnetic bed.This is a perfect replacement. You don't need to remove anything. Leave the old magnetic surface on your bed. For some reason the magnetic orientation is 90 opposite from the original, so adhesion is nil. The solution is: Cut off the small tab at the front so it can fit rotated 90. The tab is not necessary anyway. Rotate the surface 90 and the magnetism holds it solidly. It is a perfect replacement for the original. The adhesive magnetic surface is not used, perhaps they should sell it without that at a lower price.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Michael
Date: March 29, 2022
Easy to use, tastes great.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Porkchop
Date: March 25, 2022
Be careful when putting in magnet strip only get one shot
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Robert Fischer
Date: March 23, 2022
Product as described. Thanks.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
ppresto
Date: March 23, 2022
Coming from the stock plate and a scrapper this is heaven on a build plate. Remove build from plate warm with your fingers, seriously impressed. Wiping down between builds with iso alcohol no marks at all. So far very happy with bed temps up to 70c max. Pla comes off with ease, it's true. Glad to have in my build plates collection. Ender 3S1 printer.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]