5 out of 5
Customer Reviews
By
Trent Taylor
Date: January 21, 2023
No issues, great bed
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By
Joey
Date: January 20, 2023
I've tried the original Ender 3d bed with clips, a spring steel bed and this. Out of the 3, this one is my favorite.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Diane J Rigby
Date: January 19, 2023
Was a gift
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Robert F.
Date: January 18, 2023
loud alarm for a very reasonable price
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Roy Tillery
Date: January 16, 2023
Decent 3d print bed for beginners who aren't ready to dabble in glass 3d bed
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Jordan
Date: January 16, 2023
After adjusting my z-limit switch and a few other settings, this thing is a dream for the price. If it wont come off easy when cold, heat the bed up to max-recommended bed temp for your material. I haven't had a problem yet, and no more blue tape or hairspray!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
James Davis
Date: January 16, 2023
Having a flexible build plate on your printer is an amazing upgrade that is perfect. It makes taking the builds off super easy and had a slight texture to the mat that makes adhesion a breeze. I have used mine so much that I wore one out and needed another! Don't let that statement fool you, they are very durable and do last a long time. Easy to care for, just a little dish soap and water every now and again makes it like new.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
T.pelton
Date: January 14, 2023
This has worked great with the ender 3. wonderful
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
steven p johnson
Date: January 14, 2023
Works like my original.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Thomas B. Thurman
Date: January 11, 2023
If you hit the Ender 3 group on Reddit, they all rave about PEI removable beds, I had to see what the hype is about. First things first, they all talk about the spring steel version and it is double the cost of this. This is a plastic sheet with a magnetic base with the PEI. But all in all, this little bed is amazing. Prints pop right off when done but they stick amazingly well during the printing. Be sure to either remove the print right after it's done or heat the bed a little to reduce the chance of creasing. I'll probably upgrade to the spring steel one if this one gets creased or if the coating flakes but you can't go wrong with this (if you don't work with ABS for extended periods of time above 80C for longer than 24 hours then stick with glass the magnets get demagnetized apparently)
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Anthony C.
Date: January 08, 2023
Excellent value....huge upgrade over OEM beds. Adhesion is excellent with just a tiny bit of hairspray or dilute Elmer's glue/stick.Super easy to remove prints and seems quite durable
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: January 06, 2023
Easy to remove the magnetic pad from the bed and peel the prints off.This works quite well when the prints are still warm. A bit difficult to remove them when it is cold.Make sure you heed the manufacturer's warning about not bending it beyond 45 degrees. Bend it too far and you will have permanent creases. Speaking from experience :( But at least it is inexpensive enough if it starts to bug me too much, I can just get another.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
dot
Date: January 02, 2023
This product was as described. Very easy to be applied onto the 3D printer print bed. This item replaces the glass print bed on my Creality 3V2. Love it would recommend and will by another one.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: December 14, 2022
This bed is super easy to remove, to easy, it barely holds to the magnet. This isn't the flex bed that comes with the s1, I assume it's more like the one on original ender. The dimensions are also wrong, I bought for my ender 3 v2 and it's slightly big all the way around. Adhesion works well but the lack of metal to hold to magnet better makes me likely to put this as a loss. Get the creality pei bed or other brand and avoid this one unless you need a cheap option bit a bed isn't a good place to go cheap.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Warren and Christine
Date: December 09, 2022
My printer never stops running. I'm frequently pulling things off maybe every 6 hours or so. I'm getting about 6 months of use off these before they fail, as some of the material comes off. Typically I'm using eSun PLA which adheres great about 60 degrees. I've also printed ASA on it at 90 degrees. For the price I just keep a spare on hand as I'm really happy with the performance.
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By
Jared Mavis
Date: December 09, 2022
Flops on and off the bed easily and can bend a good amount to get everything off it easily. Doesn't seem to permanently warp even when bent a lot.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Kassie
Date: December 07, 2022
I got what I ordered. Was better than the last 3d printing mat I had.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Helium5793
Date: December 02, 2022
You use adhesive to stick the magnetic surface to your heated platen. That is not easy to get off. After a while the sheet that sticks to the magnetic surface becomes less able to hold your printout. It would be good to be able to purchase the upper part alone so you could refresh the system without removing the magnetic part. Haven't seen those available though they might be somewhere.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
A Customer
Date: November 27, 2022
Easy to use
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Lukas
Date: November 23, 2022
The plate itself works nice, but after I installed I've had SERIOUS leveling issues. I've tried all the tricks and sent a good number of hours but I can't get it level. The worst part is that I can't tell why
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]