5 out of 5
Customer Reviews
By
Justin S.
Date: April 13, 2023
Works great, it's technically compatible with ender 3v2 but it's a little oversize
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By
devin
Date: March 21, 2023
Prints stick too well. What do I mean buy that? The first two prints broke trying to get them off of the cover. It's not rigid. It feels like a thick piece of vinyl. I've got the initial purge line from the beginning of my print still stuck in pieces to the cover from my second print and I can't seem to get it to come off. I didn't use any adhesive either. I wanted to test the adhesion of the cover before I used anything. Also, my camera is mounted on the Y axis and the tab of this cover will hit the cam mount on every snapshot, so I have to have the cover on backward. That's just an inconvenience. The fact that the prints break before they release, is a problem. Don't buy this cover.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Mike
Date: March 20, 2023
Quick to slide on quick to slide/pop off. No more prying at your print and scraping at your glass bed. I would still use a little hair spray for adhesion though.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Paul M
Date: March 17, 2023
You have to be very careful if bending this to remove the print as it is easy to cause a crease which will ruin the bed by causing unevenness. Get a spring steel bed instead of this, much more durable.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Warren and Christine
Date: December 09, 2022
My printer never stops running. I'm frequently pulling things off maybe every 6 hours or so. I'm getting about 6 months of use off these before they fail, as some of the material comes off. Typically I'm using eSun PLA which adheres great about 60 degrees. I've also printed ASA on it at 90 degrees. For the price I just keep a spare on hand as I'm really happy with the performance.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Kassie
Date: December 07, 2022
I got what I ordered. Was better than the last 3d printing mat I had.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Helium5793
Date: December 02, 2022
You use adhesive to stick the magnetic surface to your heated platen. That is not easy to get off. After a while the sheet that sticks to the magnetic surface becomes less able to hold your printout. It would be good to be able to purchase the upper part alone so you could refresh the system without removing the magnetic part. Haven't seen those available though they might be somewhere.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Ivan Youroff
Date: October 24, 2022
PLA just melts right into the surface, I don't have a better explanation why it's sooo hard to remove it. Especially if it's just the first layer of a cancelled print. I used to have a couple of the same magnetic covers and they are very different: weren't that sticky, and magnetic attachment was much stronger.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Tyler
Date: October 03, 2022
I've been using these for a year or so. Very easy to peel parts off.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Michael
Date: September 29, 2022
The only positive thing I will say, is installing this was easy, sure. There is no screwing up the magnetic orientation. The sticky bottom half is very sticky and sticks well. That's the end of the good points.That's all pointless when it has UTTERLY TERRIBLE adhesion. My first print attempt with it, I monitored it the first hour and it seemed okay, even though the very first literal strands didn't didn't stick at all, but then it started sticking so I brushed it off. I left the room for about an hour and came back to this giant clog because it somehow decided to stop sticking and slide around. The engaged a clog. The clog ultimately overheated the printer head and killed my printer. YOU OWE ME A NEW PRINTER. After realizing the print stopped earlier than expected I came back in to a dead printer and discovered the clog and the print slid way away from where it was. I want my money back and a new printer.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
christopher
Date: August 25, 2022
Supposed to be magnetic. The build plate moves with the slightest touch. Have to use clamps to print.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Tyler Zdanowicz
Date: August 24, 2022
I only print with PLA and this has worked absolutely amazing. I leveled the bed initially after getting it... I haven't had to level the bed since! This works way better than my stock bed
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
SammyB
Date: August 18, 2022
The magnetic material in the mat does not adhere to the Ender 3 pro bed unless it is turned sideways! So if you wanted a spare mat and your original is good, you can’t switch between the two. Not happy.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Y. J.
Date: August 14, 2022
After 8 months and around 15 prints the top started to pel off with the prints. So, I must buy a new one.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
kyle z
Date: August 13, 2022
sticks to the print almost to well easy to pop on and off though
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Hlywine
Date: August 12, 2022
This mat works great for adhesion, but like many have already mentioned, the magnet part is offset by 90. Which means if you install it the way it's supposed to go on, it doesn't stick very well to the table. I tried printing like that but in the middle of my print it shifted and messed up my print.So I just turned it sideways to test and yes, it sticks on like a glue. So all I did was cut off the tab that sticks out with a razor blade and put it on sideways. Works like a charm now.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Adam Myszka
Date: August 09, 2022
I am impressed by this product in the worst way. The parts you expect to be sturdy, are flimsy and the nonstick surface has such high adhesion I almost ripped the build plate removing the first print. Additionally the magnetic hold is a fraction of what the default build plate provides. There is no way that this is OEM as the logo implies.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Justus
Date: July 23, 2022
Bed adhesion is not good, a little glue and good to go.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Michael Fitzgerald
Date: July 22, 2022
It's in the title. This is very convenient and way better than the original plate. I even like it more than my glass plate
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Doing it myself
Date: July 21, 2022
Have to say these because I'm on my third in less than 6 months. And that is my fault because, well, I suck at bed leveling my stock ender 3 pro. When my ender does work, I get days and days worth of prints without adhesion issues, I meaan, you do have to clean it when you get your oily hands all over it. The work as advertised. I will say however Ive not used exotic filaments. PLA, PLA and PETG so far.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]