5 out of 5
Dayton Audio SD315A-88 12" DVC Subwoofer
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: SD315A-88
The Dayton Audio SD315A-88 12" subwoofer speaker is one of the best bang-for-the-buck low frequency drivers available today.
Key Features:
Dayton Audio SD315A-88 12" DVC Subwoofer
The Dayton Audio SD315A-88 12" subwoofer speaker is one of the best bang-for-the-buck low frequency drivers available today. Dayton Audio DVC Series woofers were designed to offer the maximum performance-per-dollar. The speakers feature poly coated paper cones, wide rubber surrounds, large dual 8 ohm voice coils, vented pole pieces, and bumped back plates. Their healthy Xmax, long-throw construction, and dual voice coils make them perfect for any economical yet high-performing subwoofer speaker system.
Note: This is a dual voice coil driver, 8 ohms per coil. Specifications measured with the voice coils wired in parallel for a 4 ohm load.
The Dayton Audio SD315A-88 12" subwoofer speaker is one of the best bang-for-the-buck low frequency drivers available today.
Key Features:
- Works equally well in sealed or vented enclosures
- Attractive gasket-less design
- Long-life rubber surround for years of reliable service
- Excellent bottom octave performance
Dayton Audio SD315A-88 12" DVC Subwoofer
The Dayton Audio SD315A-88 12" subwoofer speaker is one of the best bang-for-the-buck low frequency drivers available today. Dayton Audio DVC Series woofers were designed to offer the maximum performance-per-dollar. The speakers feature poly coated paper cones, wide rubber surrounds, large dual 8 ohm voice coils, vented pole pieces, and bumped back plates. Their healthy Xmax, long-throw construction, and dual voice coils make them perfect for any economical yet high-performing subwoofer speaker system.
Note: This is a dual voice coil driver, 8 ohms per coil. Specifications measured with the voice coils wired in parallel for a 4 ohm load.
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | SD315A-88 |
| Part Number | 295-488 |
| UPC | 844632088711 |
| Unit of Measure | Each |
| Weight | 10.3 |
Product Specifications | |
|---|---|
| Nominal Diameter | 12" |
| Bolt Circle Diameter | 11.96 |
| Moving Mass Of Diaphragm (Mmd) | 109.2 |
| Power Handling (RMS) | 120 Watts |
| Power Handling (MAX) | 240 Watts |
| Impedance | 4Ω |
| Frequency Response | 24 to 2,000Hz |
| Sensitivity | 93.75dB 2.83V/1m |
| Voice Coil Diameter | 2" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 24.2Hz |
| DC Resistance (Re) | 3.1Ω |
| Voice Coil Inductance (Le) | 1.5mH |
| Mechanical Q (Qms) | 3.54 |
| Electromagnetic Q (Qes) | 0.37 |
| Total Q (Qts) | 0.33 |
| Compliance Equivalent Volume (Vas) | 5.36ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.4mm/N |
| BL Product (BL) | 11.86T·m |
| Diaphragm Mass Inc. Airload (Mms) | 109.2g |
| Maximum Linear Excursion (Xmax) | 7mm |
| Surface Area of Cone (Sd) | 522.8cm² |
Materials of Construction | |
|---|---|
| Cone Material | Coated Paper |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 12.36" |
| Baffle Cutout Diameter | 10.71" |
| Depth | 5.12" |
| # Mounting Holes | 5 |
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) | |
|---|---|
| Sealed Volume | 0.87ft³ |
| Sealed F3 | 62Hz |
| Vented Volume | 2.15ft³ |
| Vented F3 | 38Hz |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category