Devcon Plastic Steel® Liquid (B) Product Details: Can be machined to close tolerances Hardens in about an hour Ideal leveling compound for machinery and equipment Low viscosity and high comprehensive strength When cast over models, steel-filled liquid epoxy provides accurate detail reproduction in the making of holding fixtures, light-gauge forming dies, and molds Testing and Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Qualifies under Mil Spec MMM-A-1754 | |
Specifications | |
Adhesive Tensile Shear | 2,800 psi |
Applicable Materials | Most Metals |
Applications | Multi-Purpose |
Big Catalog Page# | 2012:173 |
Brand | DEVCON |
Capacity Vol. [Nom] | 4 lb |
Capacity Wt. [Nom] | 4 lb |
Chemical Compound | Epoxy |
Color | Dark Grey |
Compressive Strength | 10,200 psi |
Country of Origin | US |
Dielectric Strength | 30 V/mil |
Full Cure Time @ Temp. | 16 h @ 75 °F |
Hardness [Nom] | 85 Shore D |
Hazmat | YES |
MPI Catalog | NO |
ORMD | NO |
Packing Type | Kit |
Prop 65 | NO |
Resistance | Chlorinated Solvents; Hydrochloric Acid-10%; Keros |
Special Order | YES |
Stock Status | In Stock |
Temp. Range [Max] | 250 °F |
UNSPSC | 31201600 |
Viscosity [Nom] | 20,000 cP |
Working Time [Nom] | 45 min |
Wt. | 5.33 lb |
NOTE: Country of Origin information is based on information provided by product manufacturers and other third parties. We have not independently verified this information and does not warrant its accuracy. | |
Download Safety Data Sheet |
Attention CA Residents: Prop 65 Warning