Devcon Aluminum Liquid (F-2) Product Details: Aluminum-filled pourable epoxy for making molds, patterns, and holding fixtures Can be machined, drilled, or tapped Low viscosity provides accurate reproduction of mold details and of delicate or intricate parts Qualifies under MMM-A-1754 75-minute working time Testing and Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure | |
Specifications | |
Adhesive Tensile Shear | 2,700 psi |
Applicable Materials | Aluminum |
Applications | Multi-Purpose |
Big Catalog Page# | 2012:167 |
Brand | DEVCON |
Capacity Vol. [Nom] | 3 lb |
Capacity Wt. [Nom] | 3 lb |
Chemical Compound | Epoxy |
Color | Aluminum |
Compressive Strength | 9,820 psi |
Country of Origin | US |
Dielectric Strength | 100 V/mil |
Full Cure Time @ Temp. | 16 h @ 75 °F |
Gap Fill [Nom] | 1 in |
Hardness [Nom] | 85 Shore D |
Hazmat | YES |
MPI Catalog | NO |
MPI Catalog Page# | 2021:62 |
ORMD | NO |
Packing Type | Kit |
Physical Form | Liquid |
Prop 65 | NO |
Resistance | Chlorinated Solvents; Hydrochloric Acid-10%; Keros |
Special Order | NO |
Stock Status | In Stock |
Temp. Range [Max] | 250 °F |
Tensile Strength [Nom] | 5,000 psi |
UNSPSC | 31201600 |
Viscosity [Nom] | 20,000 cP |
Working Time [Min] | 75 min |
Working Time [Nom] | 75 min |
Wt. | 3.83 lb |
NOTE: Country of Origin information is based on information provided by product manufacturers and other third parties. We have not independently verified this information and does not warrant its accuracy. | |
Download Safety Data Sheet |
Attention CA Residents: Prop 65 Warning