Devcon Wear GuardTM High Impact Product Details: 45-minute working time Can be troweled to form a smooth surface Excellent for dust particulate applications including slurry pumps, scrubbers, screens, and screw conveyors Outstanding resistance to a wide range of chemicals High-density, micro-alumina ceramic bead-filled epoxy system with flexible polymers for superior adhesion and protection against extreme impact and flexing Testing and Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure | |
Specifications | |
Adhesive Tensile Shear | 2,567 psi |
Applicable Materials | Ceramic; Concrete; Most Metals |
Big Catalog Page# | 2012:174 |
Brand | DEVCON |
Capacity Vol. [Nom] | 30 lb |
Capacity Wt. [Nom] | 30 lb |
Chemical Compound | Epoxy |
Color | Grey |
Compressive Strength | 7,250 psi |
Country of Origin | US |
Full Cure Time @ Temp. | 8 h @ 75 °F |
Hardness [Nom] | 85 Shore D |
Hazmat | YES |
MPI Catalog | NO |
ORMD | NO |
Packing Type | Bucket |
Prop 65 | NO |
Resistance | Ammonia; Chlorinated Solvents; Sulfuric Acid-10% |
Special Order | NO |
Stock Status | In Stock |
Temp. Range [Max] | 300 °F |
Tensile Strength [Nom] | 4,220 psi |
Working Time [Nom] | 45 min |
Wt. | 30 lb |
NOTE: Country of Origin information is based on information provided by product manufacturers and other third parties. We have not independently verified this information and does not warrant its accuracy. | |
Download Safety Data Sheet |
Attention CA Residents: Prop 65 Warning