DoorKing 9220-387 - Vehicular 2Hp 230V 3-Phase Slide Gate Operator W/60' Chain For Up To 1-Ton 100' Gates, Price/Each

• Primary reduction is provided by a 30:1 gear running in a continuous oil bath
• Operator is shipped with Chain Brackets, Hardware and 20 ft of #60 Chain
• Adjustable Solid State Speed Control, 1/2 to 2 ft/sec
• Housing is G90 Galvanized Steel painted charcoal grey with stainless steel Access Door

• Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)

• Heavy-Duty Mounting Pedestal is recommended for gates weighing over 1500 lb and is required if Chain Tray is used
• Chain Tray Kit (p/n 2601-270) is available in 10 ft lengths and is recommended on gates exceeding 20 ft in length
• Red / Green Traffic Signal provides a visual indication when it is OK for traffic to proceed

• Fail-Secure Operator. Electrical Interlock prevents gate from starting during manual operation
• Slow Start / Slow Stop
• Adjustable Partial Open Limit
• Selectable Stop / Reverse Loop Function
• Anti-Tailgating Feature
• Solid-State Motor Relays
• Power Boost Start Circuit
• Direct Driven Limit Switches for precise gate control
• Built-In Power and Reset Switches
• Two 115 VAC Convenience Outlets
• Ports for plug-in Open and Reverse Loop Detectors (DKS Loop Detectors only)

• Environmental: 10°F to 140°F (-12°C to 62°C)
• Thermostatically Controlled Heater Kit recommended for colder environments
• Shipping weight approximately 225 lb (102 kg) Depending on model and options selected

• This Vehicular Slide Gate Operator is designed for Class III and IV applications only and should never be used in applications serving the general public such as apartment complexes, gated communities, residential applications, parking garages, etc.
• Operator requires Type B1 and/or Type B2 entrapment protection in each direction of travel, otherwise the operator will not run.

Specifications

Vendor Item No.

9220-387

Item Category Code

SLIDE

Vendor No.

DOORKING