skip to footer block
KEF Dv8 RBBR 01 Mto Series Rear Bumper P14806748KEF-DV8RBBR01 https://cdnimages.opentip.com/full/KEF/KEF-DV8RBBR01.jpg Dv8 RBBR 01 Mto Series Rear Bumper Manufacturer Part Number: RBBR-01Bumper; MTO Series; Modular Design; Direct Fit; Mounting Hardware Included; With D-Ring Shackle Mounts; With Two 3 Inch Square Light Cutouts; Accommodates Up To 37 Inch Spare Tire On OEM Carrier; Offset License Plate Mount; Powder Coated; Black; SteelAttributes Type: Modular Tubular: No Air Bag Compatible: No Finish: Powder Coated Color: Black Material: Steel Drilling Required: No With Mounting Hardware: Yes Hitch Type: Without Receiver Maximum Gross Trailer Weight: Without Receiver Maximum Tongue Weight: Without Receiver With Grille Guard: No With Grille Insert: No With Bull Bar: No With Winch Mount: No Winch Compatible: No Tow Hooks: Not Compatible With Tow Hooks D-Rings: With D-Ring Mounts With Light Cutouts: Yes Light Type: Lights - Sold Separately With Skid Plate: No With Spare Tire Mount: No With Jacking Points: No With CB Antenna Mount: No Estimated Install Time (Hours): 4 Product Description This Bronco Rear Bumper is part of the MTO Series, and is compatible with all Bronco trim levels. Manufactured from high grade steel, it was designed to protect the rear end while maintaining high ground clearance. We've placed the license plate mount at the side of the bumper, in order to accommodate the Sasquatch package 35 Inch tires, and to ensure the tail gate swings open freely. The bumper can fit up to a 37 Inch tire on the OEM carrier above. Included with the new license plate bracket are license plate lights. Two 3 Inch flush mount pod lights can be mounted towards either side of the bumper. These can be wired to the reverse lights, or to a separate wiring harness in order to provide supplemental lighting at the rear of your Bronco while on the trail. There are 2 clevis mounts that take 3/4 Inch D-ring shackles that provide recovery options. The MTO Series bumper includes sensor holes to retain full functionality of the factory backup sensors.Features & Benefits Reinforced D-Ring Mounts 2-Stage Micro-Texture Black Powder Coating Retains Factory Backup Sensors 4mm Body And 5 Millimeter Mounts And Supports Paintable Aluminum Mesh Panels Accommodates Up To 37 Inch Spare Tire On OEM Carrier Two Mounts For 3 Inch Flush Mount Pod Lights Limited 1 Year Warranty This Fits2021-2023 Ford BroncoPlease Click Here for Installation Instructions. 14806748 810087810177 225.2900lbs 0.00 0.00 0.00
Dv8
999.9900 2025-10-19 Only 3 left In Stock

Dv8 RBBR-01 Mto Series Rear Bumper

Brand Dv8
Shop more from KEF

UPC: 810087810177
SKU: KEF-DV8RBBR01
Price: $999.99
Quantity:
Only 3 left In Stock
*  Shipping Note: Usually ships within 1 to 2 weeks.
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: RBBR-01

Bumper; MTO Series; Modular Design; Direct Fit; Mounting Hardware Included; With D-Ring Shackle Mounts; With Two 3 Inch Square Light Cutouts; Accommodates Up To 37 Inch Spare Tire On OEM Carrier; Offset License Plate Mount; Powder Coated; Black; Steel

Attributes

  • Type: Modular
  • Tubular: No
  • Air Bag Compatible: No
  • Finish: Powder Coated
  • Color: Black
  • Material: Steel
  • Drilling Required: No
  • With Mounting Hardware: Yes
  • Hitch Type: Without Receiver
  • Maximum Gross Trailer Weight: Without Receiver
  • Maximum Tongue Weight: Without Receiver
  • With Grille Guard: No
  • With Grille Insert: No
  • With Bull Bar: No
  • With Winch Mount: No
  • Winch Compatible: No
  • Tow Hooks: Not Compatible With Tow Hooks
  • D-Rings: With D-Ring Mounts
  • With Light Cutouts: Yes
  • Light Type: Lights - Sold Separately
  • With Skid Plate: No
  • With Spare Tire Mount: No
  • With Jacking Points: No
  • With CB Antenna Mount: No
  • Estimated Install Time (Hours): 4


Product Description


This Bronco Rear Bumper is part of the MTO Series, and is compatible with all Bronco trim levels. Manufactured from high grade steel, it was designed to protect the rear end while maintaining high ground clearance. We've placed the license plate mount at the side of the bumper, in order to accommodate the Sasquatch package 35 Inch tires, and to ensure the tail gate swings open freely. The bumper can fit up to a 37 Inch tire on the OEM carrier above. Included with the new license plate bracket are license plate lights. Two 3 Inch flush mount pod lights can be mounted towards either side of the bumper. These can be wired to the reverse lights, or to a separate wiring harness in order to provide supplemental lighting at the rear of your Bronco while on the trail. There are 2 clevis mounts that take 3/4 Inch D-ring shackles that provide recovery options. The MTO Series bumper includes sensor holes to retain full functionality of the factory backup sensors.

Features & Benefits

  • Reinforced D-Ring Mounts
  • 2-Stage Micro-Texture Black Powder Coating
  • Retains Factory Backup Sensors
  • 4mm Body And 5 Millimeter Mounts And Supports
  • Paintable Aluminum Mesh Panels
  • Accommodates Up To 37 Inch Spare Tire On OEM Carrier
  • Two Mounts For 3 Inch Flush Mount Pod Lights
  • Limited 1 Year Warranty

This Fits

2021-2023 Ford Bronco

Please Click Here for Installation Instructions.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!