DPL Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove Double Nitrile Coating Palm P11487083DPL-VV910JA09 https://cdnimages.opentip.com/full/DPL/DPL-VV910.jpg Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove Double Nitrile Coating Palm Manufacturer Part Number: VV910 Product specificationsHigh performance polyethylene support. Thermoplastic (TPR) reinforcement on back and fingertips. Smooth nitrile coating/foam nitrile on palm and fingertips. Embossed inside reinforcement on palm. Kevlar® thread on all the seams.Support: High performance polyethylene fibre.Coating: nitrile.Back reinforcement: TPR. Ref. : VV910Product Use - RisksSecond work / craftmanServices / LogisticsConstruction / Civil engineeringHeavy industryOil / GasCutting / PerforationWearingShockProduct\'s highlights & user\'s benefitsWash in cold waterDouble nitrile coating to work in oil environments:• First smooth nitrile coating: Oil permeability• Second foam nitrile coating: Good gripFlexible reinforcements for better protection against impact and pinching.Reinforcement between the thumb and index finger and on the palmProtection against impact in metacarpal area. For an energy impact of 5 J, the maximum force transmitted to the back of the hand must be less than 4 kNVery good resistance to abrasion and cuttingKevlar® thread for a longer durability of the glove8 cm cuff: safety and comfortAvailable only with header cardSafe, qualitative and very comfortable; the EOS NO CUT is surely one of the gloves with the most interest on the market!Certifications and StandardsUSA STANDARDSANSI-ISEA 105:2016 Hand protection A3 Resistance to cutting by sharp objects (from A1 to A9) REGULATION (EU) 2016/425EN420:2003+A1:2009 General requirements 5 Dexterity (from 1 to 5) • Conform to harmlessness (pH, chrome VI levels, etc…).• Conform to the size charts (see chart on below).• Pass the dexterity test.• Conform to the labelling, information and identification instructions.EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm) 4 Resistance to abrasion (from 1 to 4) X Resistance to cutting (from 1 to 5) 4 Resistance to tear (from 1 to 4) 3 Resistance to puncture (1 to 4) D Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F) P Protection against impact in metacarpal area (P) (EN13594:2002 6.8.2) The EN388 standard applies to all types of protective gloves with respect to physical and mechanical aggression from abrasion, cutting from slicing, perforation and tearing. Since the 2016 version of the standard, new optional performances have appeared.Impact resistance on the metacarpal area: if this performance is claimed, the \"P\" mark appears.Cut by blade, 2 test methods:EN388 6.2.: For low to middle risks of cutting. A circular blade on which a constant force of 5 N is applied, moves back and forth until the sample is cut. It measures the number of completed cycles and is credited with the corresponding level.EN ISO 13997: For materials that blunt the blade during the EN388 6.2 test and/ or are particularly resistant, for high risk of cutting. A straight blade makes a single movement of 20 mm with a force of 2N, the test is repeated with a different force as many times as necessary until the sample is cut. A level corresponding to the force required to cut the sample is assigned. This method better represents the usagesituations that present a high risk of cutting.DocumentsProduct sheet Declaration of Conformity user instructions pack 11487083 3295249191559 1.4100lbs 2.09 5.59 12.72

Elvex

18.65 2025-07-06 In Stock Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove Double Nitrile Coating Palm

Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove - Double Nitrile-Coating Palm

Brand Elvex

Shop more from DPL

UPC: 3295249191559

SKU: DPL-VV910

Price: $18.65

Minimum Order: $187.50 minimum order amount required, mix more items >

Size:

Quantity:

In Stock

8	- + $18.65
9	- + $18.65
10	- + $18.65
11	- + $18.65

Qty
Price

* Click "Add to Cart" to calculate shipping and delivery time.

Share & Earn 10% Cash Back Best Price in Bulk

Best Price in Bulk!

Because we are a major distributor for some products, we price very aggressively by sacrificing profit margin whenever we sell in bulk. The philosophy to offer quality products with little mark up has created unmatched customer loyalty for some successful membership based stores. Unlike those wholesale to public membership clubs, we do not charge any membership fee. Some merchants offer FREE shipping, but when you buy quantity 10, you pay 10 times total. Essentially, you are paying 10 times on shipping. We don't think that is fair to you. Why? Most of the time, shipping a 10 lb parcel does not cost 10 times of a 1 lb parcel.

Here is an example:

Opentip	Others
Product Price: $8	Product Price: $20
Shipping for quantity 1: $12	Shipping: FREE
Quantity: 10	Quantity: 10
Total Shipping for quantity 10: $18	Total Shipping: FREE
Subtotal: $98 Saving: $102 (51%)	Subtotal: $200

Don't be shy. If you discover any competitor outselling us in a particular product, whenever you purchase in large quantity, please bring it to our attention. Most of the time, we will match or beat their price, and give you a credit. If we lose to a competitor, it is our shame. We then know we need to work harder in sourcing to create values for you.

* Price comparison must be based on comparable brands or models and in bulk quantity purchase.

Optional related products

HyFlex 11-818-9 11-818 Palm Coated Thin Work Gloves, Size 9, Blue

$44.48

Elvex Deltuplus VE712GR Polyester Knitted Glove / Nitrile Palm

$1.60

Elvex Deltuplus VE722 Polyester Knitted Glove - Nitrile Foam Palm

$2.36

Portwest VA120 Vending PU Palm

$1.03

Portwest A801 Double-Dipped Latex Gauntlet

$2.66

Elvex Deltuplus VE730OR Knitted Cotton/Polyester Glove With Latex...

$2.21

Elvex Deltuplus VV736 THRYM Glove

$10.84

WELLS LAMONT M005M.WLC M005.WLC Highly Reusable Full Finger Nylon...

$1.69

WELLS LAMONT M005L.WLC M005.WLC Highly Reusable Full Finger Nylon...

$16.56

PIP 16-AR413 G-Tek PolyKor AR Seamless Knit PolyKor/Aramid Blend...

$149.76

PIP 34-8443 MaxiFlex Cut Seamless Knit Engineered Yarn Glove with...

$102.82

PIP 34-8443V MaxiFlex Cut Seamless Knit Engineered Yarn Glove with...

$8.70

PIP 34-8453 MaxiFlex Cut Seamless Knit Engineered Yarn Glove with...

$105.26

PIP 34-8743 MaxiFlex Cut Seamless Knit Engineered Yarn Glove with...

$85.34

Product Description

Manufacturer Part Number: VV910

Product specifications

High performance polyethylene support. Thermoplastic (TPR) reinforcement on back and fingertips. Smooth nitrile coating/foam nitrile on palm and fingertips. Embossed inside reinforcement on palm. Kevlar® thread on all the seams.

Support: High performance polyethylene fibre.
Coating: nitrile.
Back reinforcement: TPR.

Ref. : VV910
Product Use - Risks

Second work / craftman

Services / Logistics

Construction / Civil engineering

Heavy industry

Oil / Gas

Cutting / Perforation

Wearing

Shock
Product's highlights & user's benefits

Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove - Double Nitrile-Coating Palm

Wash in cold water

Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove - Double Nitrile-Coating Palm

Double nitrile coating to work in oil environments:
• First smooth nitrile coating: Oil permeability
• Second foam nitrile coating: Good grip

Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove - Double Nitrile-Coating Palm

Flexible reinforcements for better protection against impact and pinching.

Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove - Double Nitrile-Coating Palm

Reinforcement between the thumb and index finger and on the palm

Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove - Double Nitrile-Coating Palm

Protection against impact in metacarpal area. For an energy impact of 5 J, the maximum force transmitted to the back of the hand must be less than 4 kN

Very good resistance to abrasion and cutting

Kevlar® thread for a longer durability of the glove

8 cm cuff: safety and comfort

Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove - Double Nitrile-Coating Palm

Available only with header card

Safe, qualitative and very comfortable; the EOS NO CUT is surely one of the gloves with the most interest on the market!
Certifications and Standards

USA STANDARDS

Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove - Double Nitrile-Coating Palm

ANSI-ISEA 105:2016 Hand protection

Resistance to cutting by sharp objects (from A1 to A9)

REGULATION (EU) 2016/425

EN420:2003+A1:2009 General requirements

Dexterity (from 1 to 5)

• Conform to harmlessness (pH, chrome VI levels, etc…).
• Conform to the size charts (see chart on below).
• Pass the dexterity test.
• Conform to the labelling, information and identification instructions.

Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove - Double Nitrile-Coating Palm

EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)

Resistance to abrasion (from 1 to 4)

Resistance to cutting (from 1 to 5)

Resistance to tear (from 1 to 4)

Resistance to puncture (1 to 4)

Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)

Protection against impact in metacarpal area (P) (EN13594:2002 6.8.2)

The EN388 standard applies to all types of protective gloves with respect to physical and mechanical aggression from abrasion, cutting from slicing, perforation and tearing. Since the 2016 version of the standard, new optional performances have appeared.

Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove - Double Nitrile-Coating Palm

Impact resistance on the metacarpal area: if this performance is claimed, the "P" mark appears.

Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove - Double Nitrile-Coating Palm

Cut by blade, 2 test methods:

EN388 6.2.: For low to middle risks of cutting. A circular blade on which a constant force of 5 N is applied, moves back and forth until the sample is cut. It measures the number of completed cycles and is credited with the corresponding level.

EN ISO 13997: For materials that blunt the blade during the EN388 6.2 test and/ or are particularly resistant, for high risk of cutting. A straight blade makes a single movement of 20 mm with a force of 2N, the test is repeated with a different force as many times as necessary until the sample is cut. A level corresponding to the force required to cut the sample is assigned. This method better represents the usage
situations that present a high risk of cutting.

Elvex Deltuplus VV910 High Performance Polyethylene Knitted Glove - Double Nitrile-Coating Palm

Documents

Product sheet

Declaration of Conformity

user instructions pack

Attention CA Residents: Prop 65 Warning

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

You may also like