5 out of 5
Customer Reviews
By
Tasha E
Date: October 31, 2023
Would be 5 star but sticky pad just isn't the best.
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By
Whitecar$ix
Date: April 10, 2023
Looks good and works good
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
william sheehan
Date: March 04, 2023
Great price and Easy to install only draw back is that the adhesive for install was not strong enough to hold whee I was doing my install even after using alcohol wipes to clean and install so I used a couple of drops of superglue and worked perfectly , so you will need to purchase better adhesive if you do not want to use superglue!!!
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
jorgeresto
Date: February 24, 2023
Product has worked well. Only slight complaint is the pivot joint where the housing mounts to the base is taller than needs to be. Had to modify it to get to sit low enough to not block other gauges on the dash. Seems to be a solid mount though.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Joseph
Date: January 05, 2023
Had to get some different 3m tape other than that perfect.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Mark guy
Date: January 05, 2023
Had to get some different 3m tape other than that perfect.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Randy Mohan
Date: January 04, 2023
Much smaller then described. Does not fit AEM wide band
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Mark guy
Date: January 04, 2023
Much smaller then described. Does not fit AEM wide band
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Richard m Russell
Date: October 18, 2022
The tack mount worked good but I wish there Would have been screws to mount it instead of the sticker.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
John M.
Date: August 31, 2022
Easy to use! Looks good!
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
austin
Date: June 23, 2022
Looks good I had to drill the hole for the wires alittle bigger but I knew that going into it overall it feels sturdy an looks good would buy again
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Bruce Graham
Date: January 20, 2022
I had to drill out the hole to get the plug for a Glow Shift gauge to go through. The adhesive is not very strong, but for lt;10 bucks, it's a nice option. The gauge fits nicely with the seal around it and it looks good if you don't mind gauges mounted on your dash. If you used stronger adhesive tape, you could probably stick it to the windshield.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
White Rabbit
Date: October 27, 2021
I've got two minor gripes and that's it.. The adhesive pad that comes with this... Is trash.. after 1 hour of having the gauge mounted on a clean surface.. just fell off.The second one is.. The hole in the back is fine for a narrow band or maybe a boost gauge.. but if you have to run cables through for a wide band you have to drill out a new hole.. outside of that everything else is stellar definitely pick up 3M double-sided tape before you get this
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Jeffry Perego
Date: October 22, 2021
Worked great for my gauges. Was able to mount them with very little effort.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Greg Weston
Date: September 18, 2021
Easy to use holds my tach and boost gauges with no interference.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
GenericFirstName
Date: August 06, 2021
The head falls down all the time due to cheap plastic screw that holds the arm in place. Also the sticky wont hold for long, best to use something else
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
bdautotech
Date: July 08, 2021
Yes it's an inexpensive plastic housing, but pretty sturdy and functions well for my needs. The speedometer I purchased fit well, although I had to add a bit of electrical tape to make it fit snugly in the housing. The speedometer had an additional remote button to reset the trip meter and I was able to mount it directly in the back of the housing for easy access. I think this is a good price and quality product, if you don't cling to unreasonable expectations, it is what it is.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
JR Montana
Date: July 03, 2021
Works perfectly with Teltec Guage. Looks nice.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
A Customer
Date: December 29, 2020
Works good for guages. Plastic is cheap. Could have been a little bit better made. Some little modification may be needed depending on what you're using for.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Namp;L
Date: December 18, 2020
The mount worked great for easy installation. Mine is screwed down because the glue seemed like a joke.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]