ISWFINIS 1.30.044 Swim Block Track Start P15855658ISW-1-30-044https://cdnimages.opentip.com/full/ISW/ISW-1-30-044.jpgFINIS 1.30.044 Swim Block Track Start Manufacturer Part Number: 1.30.044DESCRIPTIONThe Swim Block Track-Start is designed as an affordable way for swimmers to practice explosive race starts. The Track-Start is a platform that can be attached to your existing blocks via two methods: bolted or strapped. The bolt method is a semi permanent method requiring you to drill small holes into your block. The strap method is temporary and allows you to strap the platform onto your block when you are ready to practice with it. The Swim Block Track-Start fits all standard blocks and is FINA-compliant.FEATURESDIVE TRAINING: Adds power and agility to a swimmer\'s diveQUALITY CONSTRUCTION: Made with a stainless steel platform and polyester treadFITS ALL STANDARD BLOCKS: Uses 2 installation methods: bolted (semipermanent) or strapped (temporary); Width: 50+ cm, Length: 50-81cm7 ADJUSTABLE SWIMMER SETTINGS: Allows you to set the wedge at your preferred distance or hang it off the back of the block for relay startsFINA-COMPLIANT: Follows all swim block regulatory guidelinesCARE INSTRUCTIONSMethod 1 - Temporary Installation When using the straps for anchoring purposes please refer to the following instructions.Rinse the Swim Block Track Start with fresh water after use.To remove dirt and debris, use a gentle plastic bristle scrub brush and fresh water.Cover Track Start with a block cover when using the Track Start on a daily basis.Remove Track Start from the swim block while not in constant use.Store in a cool dry place.Every 3-6 months we recommend using a non-abrasive cleanser such as mild dish soap with a gentle plastic bristle scrub brush and fresh water to remove excess dirt and debris.Method 2 - Semipermenant Instillation When using bolts for anchoring purposes please refer to the following instructions.Rinse the Swim Block Track Start with fresh water after use.To remove dirt and debris, use a gentle plastic bristle scrub brush and fresh water.Cover Track Start with a block cover while not in use.Remove Track Start from the swim block every 3-6 months.Once removed, use a non-abrasive cleanser such as mild dish soap with a gentle plastic bristle scrub brush and fresh water to remove excess dirt and debris.EDUCATIONTech SheetManual1585565861632320326640.8000lbs0.000.000.00
Free Shipping Promotion This item qualifies for free shipping within US 48 states. Details.
Manufacturer Part Number: 1.30.044
DESCRIPTION
The Swim Block Track-Start is designed as an affordable way for swimmers to practice explosive race starts. The Track-Start is a platform that can be attached to your existing blocks via two methods: bolted or strapped. The bolt method is a semi permanent method requiring you to drill small holes into your block. The strap method is temporary and allows you to strap the platform onto your block when you are ready to practice with it. The Swim Block Track-Start fits all standard blocks and is FINA-compliant.
FEATURES
DIVE TRAINING: Adds power and agility to a swimmer's dive
QUALITY CONSTRUCTION: Made with a stainless steel platform and polyester tread
FITS ALL STANDARD BLOCKS: Uses 2 installation methods: bolted (semipermanent) or strapped (temporary); Width: 50+ cm, Length: 50-81cm
7 ADJUSTABLE SWIMMER SETTINGS: Allows you to set the wedge at your preferred distance or hang it off the back of the block for relay starts
FINA-COMPLIANT: Follows all swim block regulatory guidelines
CARE INSTRUCTIONS
Method 1 - Temporary Installation
When using the straps for anchoring purposes please refer to the following instructions.
Rinse the Swim Block Track Start with fresh water after use.
To remove dirt and debris, use a gentle plastic bristle scrub brush and fresh water.
Cover Track Start with a block cover when using the Track Start on a daily basis.
Remove Track Start from the swim block while not in constant use.
Store in a cool dry place.
Every 3-6 months we recommend using a non-abrasive cleanser such as mild dish soap with a gentle plastic bristle scrub brush and fresh water to remove excess dirt and debris.
Method 2 - Semipermenant Instillation
When using bolts for anchoring purposes please refer to the following instructions.
Rinse the Swim Block Track Start with fresh water after use.
To remove dirt and debris, use a gentle plastic bristle scrub brush and fresh water.
Cover Track Start with a block cover while not in use.
Remove Track Start from the swim block every 3-6 months.
Once removed, use a non-abrasive cleanser such as mild dish soap with a gentle plastic bristle scrub brush and fresh water to remove excess dirt and debris.
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item