0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: 344.75.770
Zinc alloy, 3D adjustable, for laminated (HPL) doors, 1/2" overlay
Specifically designed for thin panels such Phenolic material
Sleep sophisticated design, only 5 mm (3/16") of knuckle is visible
3D adjustment
Depth adjustment of ± 1mm is achieved with oblong holes
Height adjustment (up and down) of a ±2mm is on the door component
The "Safety Screw" can be pre-installed at any time as it does not effect the adjustments, however, it is required.
Integrated catch keeps doors closed, no additional magnetic catches required
During overlay (side to side) adjustment, the knuckle moves with the door preventing a gap between door's edge and knuckle
Door overlay (side to side) adjustment is on the arm component as opposed to the cup component: offering continuous adjustment of +1/-2 mm in both directions
Tested in accordance with ANSI/BHMA Grade 1 standards
For thin doors
for laminate panels (HPL)
Full overlay/half overlay mounting
laminate
without
270°
≥?10?-?≤?13 mm
10?-?13 mm
5 mm
47 mm
Side adjustment: 1 mm, Height adjustment: -2?-?2 mm, Height adjustment in cup part via eccentricDepth adjustment via horizontal slots in side component
Hinge
Fixing material (specially coated self-tapping screws)
1 twist drill bit ? 3.3 mm per packing unit of 50 items
When inserting screws into Phenolic material, they may corrode because of the material's internal properties.
Screw holes should be slightly tapered in Phenolic material to assure a tight fit.
Installation instructions
Zinc alloy, 3D adjustable, for laminated (HPL) doors, 1/2" overlay
Item details
Specifically designed for thin panels such Phenolic material
Sleep sophisticated design, only 5 mm (3/16") of knuckle is visible
3D adjustment
Depth adjustment of ± 1mm is achieved with oblong holes
Height adjustment (up and down) of a ±2mm is on the door component
The "Safety Screw" can be pre-installed at any time as it does not effect the adjustments, however, it is required.
Integrated catch keeps doors closed, no additional magnetic catches required
During overlay (side to side) adjustment, the knuckle moves with the door preventing a gap between door's edge and knuckle
Door overlay (side to side) adjustment is on the arm component as opposed to the cup component: offering continuous adjustment of +1/-2 mm in both directions
Tested in accordance with ANSI/BHMA Grade 1 standards
-
maximum project quality in accordance with ANSI grade 1 (100,000 cycles)
Area of application
For thin doors
for laminate panels (HPL)
Concealed hinge version
Full overlay/half overlay mounting
For door material
laminate
Door processing for assembly
without
Opening angle
270°
For door thickness
≥?10?-?≤?13 mm
Side panel thickness
10?-?13 mm
Knuckle diameter
5 mm
Knuckle length
47 mm
Adjustment facility
Side adjustment: 1 mm, Height adjustment: -2?-?2 mm, Height adjustment in cup part via eccentricDepth adjustment via horizontal slots in side component
Supplied with
Hinge
Fixing material (specially coated self-tapping screws)
1 twist drill bit ? 3.3 mm per packing unit of 50 items
Additional information
When inserting screws into Phenolic material, they may corrode because of the material's internal properties.
Screw holes should be slightly tapered in Phenolic material to assure a tight fit.
Installation instructions
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item