skip to footer block
NTP Holley 0 4777SAE Aluminum Double Pumper Carburetor P14764610NTP-H1904777SAE https://cdnimages.opentip.com/full/NTP/NTP-H1904777SAE.jpg Holley 0 4777SAE Aluminum Double Pumper Carburetor Manufacturer Part Number: H1904777SAEAluminum Double Pumper CarburetorPtoduct Info Aluminum Double Pumper Carburetor 4 bbl 650 cfm Model 4150 Mech. Secondary Dual Fuel Inlet Electric Choke Gasoline Shiny Finish Features and Benefits Shiny Finish For Corrosion Resistance Optimized Street/Strip Calibration That Works Out Of The Box Electric Choke For Precise Cold Start Control Mechanical Secondaries For Awesome Tire Turning Performance Dual Accelerator Pumps For Add. Fuel Under Initial Acceleration Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing 100% Wet-Flow Tested To Assure It Arrives Ready To Run Product AttributesBarrel: FourBooster Type: StraightCarburetor Type: 4150CFM: 650Choke: ElectricEmission: Without EGRFinish: ShinyFlange: Square BoreFuel Inlet: DualFuel Type: GasolineMaterial: AluminumPrimary Main Jet: 67Primary Power Valve: 6.5Secondary Main Jet: 73Secondary Pump Nozzle Size: 28Secondary Type: MechanicalSupercharged Application: NoThrottle Bore: 1.688 in.Type: AutomotiveUsage: Street/Hi-PerformanceVacuum Port Quantity: 1 timed (spark) 1 full 1 PCV Part Terminology LabelCarburetorApplication Summary Use same applications as Holley PN 0-4777SA. Intended for lightweight vehicles w/manual trans or automatics with high stall/low gearingAssociated Comments Holley Performance Emission Code 3: This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles. The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles: 1965 and older U.S. manufactured California Certified vehicles/1967 and older U.S. manufactured Federally Certified vehicles/1967 and older Foreign manufactured vehicle. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles/1968 and newer U.S. manufactured Federally Certified vehicles/1968 and newer Foreign manufactured vehicle 14764610 090127005774 10.2000lbs 7.38 11.00 12.50
Holley Performance
734.7500 2025-07-13 11 In Stock

Holley 0-4777SAE Aluminum Double Pumper Carburetor

Shop more from NTP

UPC: 090127005774
SKU: NTP-H1904777SAE
Price: $734.75
Quantity:
11 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: H1904777SAE

Aluminum Double Pumper Carburetor

Ptoduct Info
  • Aluminum Double Pumper Carburetor
  • 4 bbl
  • 650 cfm
  • Model 4150
  • Mech. Secondary
  • Dual Fuel Inlet
  • Electric Choke
  • Gasoline
  • Shiny Finish


Features and Benefits
  • Shiny Finish For Corrosion Resistance
  • Optimized Street/Strip Calibration That Works Out Of The Box
  • Electric Choke For Precise Cold Start Control
  • Mechanical Secondaries For Awesome Tire Turning Performance
  • Dual Accelerator Pumps For Add. Fuel Under Initial Acceleration
  • Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
  • Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run


Product Attributes
  • Barrel: Four
  • Booster Type: Straight
  • Carburetor Type: 4150
  • CFM: 650
  • Choke: Electric
  • Emission: Without EGR
  • Finish: Shiny
  • Flange: Square Bore
  • Fuel Inlet: Dual
  • Fuel Type: Gasoline
  • Material: Aluminum
  • Primary Main Jet: 67
  • Primary Power Valve: 6.5
  • Secondary Main Jet: 73
  • Secondary Pump Nozzle Size: 28
  • Secondary Type: Mechanical
  • Supercharged Application: No
  • Throttle Bore: 1.688 in.
  • Type: Automotive
  • Usage: Street/Hi-Performance
  • Vacuum Port Quantity: 1 timed (spark)
  • 1 full
  • 1 PCV


Part Terminology Label
Carburetor

Application Summary
Use same applications as Holley PN 0-4777SA. Intended for lightweight vehicles w/manual trans or automatics with high stall/low gearing

Associated Comments
  • Holley Performance Emission Code 3: This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles. The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles: 1965 and older U.S. manufactured California Certified vehicles/1967 and older U.S. manufactured Federally Certified vehicles/1967 and older Foreign manufactured vehicle. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles/1968 and newer U.S. manufactured Federally Certified vehicles/1968 and newer Foreign manufactured vehicle

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!