0 reviews
Be the first to review this item!
Product Description
Price is for each.
Manufacturer Part Number: 16-5230
Microssage Grill & Flowpath
Assy Gray
HydroAir Pool and Spa Microssage Jet Grill Flow Path Assembly White 16-5230 TO CONVERT YOUR THERAPY JET TO A MlCRO'SSAGE Make sure the spa pump is not running. Remove the existing laceplate and eyeball by pressing your palm against the front of the jet and rotating approximately 1/8 turn counterclockwise. To install the rotating mechanism; insert the flow path into the grill. Be sure the small brown-colored bearing is seated all the way into the grill. DO NOT USE ANY TYPE OF LUBRICATION! lnsert the assembled grill and flow path by lining up the tabs on the wall litting with the slots on the grill. Press in toward the spa wall and rotate l/8 turn clockwise until the grill locks into place. As with any moving parts, Hydro Air Industries recommends periodic removal and cleaning of the flow path assembly. Four times a year the parts should be removed, wiped off and any debris cleared away. DO NOT USE ALCOHOL or any SOLVENTS or LUBRlCANTS on your Micro'ssage Assembly, as these products may attack the plastic and cause failure. Face Diameter : 3-1/2 Length : 2-3/4 Color : White Material : Plastic
Microssage Grill & Flowpath
Assy Gray
HydroAir Pool and Spa Microssage Jet Grill Flow Path Assembly White 16-5230 TO CONVERT YOUR THERAPY JET TO A MlCRO'SSAGE Make sure the spa pump is not running. Remove the existing laceplate and eyeball by pressing your palm against the front of the jet and rotating approximately 1/8 turn counterclockwise. To install the rotating mechanism; insert the flow path into the grill. Be sure the small brown-colored bearing is seated all the way into the grill. DO NOT USE ANY TYPE OF LUBRICATION! lnsert the assembled grill and flow path by lining up the tabs on the wall litting with the slots on the grill. Press in toward the spa wall and rotate l/8 turn clockwise until the grill locks into place. As with any moving parts, Hydro Air Industries recommends periodic removal and cleaning of the flow path assembly. Four times a year the parts should be removed, wiped off and any debris cleared away. DO NOT USE ALCOHOL or any SOLVENTS or LUBRlCANTS on your Micro'ssage Assembly, as these products may attack the plastic and cause failure. Face Diameter : 3-1/2 Length : 2-3/4 Color : White Material : Plastic
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item