0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: DLS55
Power Converter; Dls Series; Converts 108 To 132 Volt Ac To 13.6 Volt Dc; 750 Continuous Watts; 55 Amps Continuous Output; 80 Percent Efficiency; With Short Circuit/ Reverse Polarity/ Over Load/ Thermal Protection; 9.7 Inch Length X 6.7 Inch Width X 3.4 Inch Height; With 36 Inch Length Power Cord; Compatible With Iota Iq4 Charge Controller
The DLS battery charger/power converter from IOTA Engineering converts nominal AC to DC Voltage. As a power supply, its tightly controlled regulation allows the user to operate any appropriate nominal DC load up to the converter's rated output current. As a battery charger, the DLS will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time that minimizes undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the converter will float-charge the battery to prevent self-discharge of its cells.
Power Converter; Dls Series; Converts 108 To 132 Volt Ac To 13.6 Volt Dc; 750 Continuous Watts; 55 Amps Continuous Output; 80 Percent Efficiency; With Short Circuit/ Reverse Polarity/ Over Load/ Thermal Protection; 9.7 Inch Length X 6.7 Inch Width X 3.4 Inch Height; With 36 Inch Length Power Cord; Compatible With Iota Iq4 Charge Controller
Attributes
- Converts: 108-132 Volt AC To 13.6 Volt DC
- Continuous Output Power: 750 Watt
- Peak Output Power: 750 Watt
- Ampere Rating: 55 Amp
- Number Of Outlets: 2
- Efficiency: 80 Percent
- Length: 9-3/4 Inch
- Width: 6-3/4 Inch
- Height: 3-1/2 Inch
- Remote On/Off Capable: No
- With USB Port: No
- With Volt/Watt Meter: No
- With Short Circuit: Yes
- With Reverse Battery Protection: Yes
- With Thermal Protection: Yes
- With Battery Cables: No
- With Built-In Charger: Yes
- With Fuse: Yes
Product Description
The DLS battery charger/power converter from IOTA Engineering converts nominal AC to DC Voltage. As a power supply, its tightly controlled regulation allows the user to operate any appropriate nominal DC load up to the converter's rated output current. As a battery charger, the DLS will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time that minimizes undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the converter will float-charge the battery to prevent self-discharge of its cells.
Features & Benefits
- Switch-Mode Technology
- Tight Line-Load Regulation
- Quickly And Efficiently Charges Batteries
- Designed To Withstand Low Transient AC Line Voltage
- Current Limit And Thermal Or Overload Protection
- Lower Operating Temperature
- Quiet Fan Operation
- External Reverse Polarity Fuse Protection From Incorrect Battery Connection
- High And Normal-Stage Charging Jack
- Limited 2 Year Warranty
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Shipping Restrictions
This product can't be shipped to the following regions: CA.
Return Policy
This item is non-returnable.
Note
This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item