KEF Intellitec Motor Control W/Voice Output Intellitec 00 00971 100 P14270363KEF-I6V0000971100 https://cdnimages.opentip.com/full/KEF/KEF-I6V0000971100.jpg Intellitec Motor Control W/Voice Output Intellitec 00 00971 100 Manufacturer Part Number: 0000971100Slide Out Control Module; Use With Intellitec Monoplex ™ System; Motor Control With Voice Output; 10 To 16 Volt Dc/ 10 To 35 AmpAttributes Compatibility: Intellitec Monoplex ™ System Product Description These controllers are designed to control the operation of a slide out room electrical mechanism. To operate the room, the owner would simply press and hold the button in the desired direction(In or Out). With the jumper in the default setting, there is delay in operation of the slide-out to allow for a voice announcement that the slide-out is in motion. The motion of the slide-out may be stopped at any time by releasing the button. When the slide out reaches it's outer most limit, the unit will sense the rise in current and switch off the power to the slide out motor. To move the room back in again, the owner will press and hold the button in the desired direction. Again, there is a short delay in operation of the slide- out to allow for a voice announcement that the slide- out is in motion. When the slide out reaches it's inner most position, the controller will sense the rise in current and will shut off power to the motor. Direction control is accomplished by using the rocker switch terminated at the MPX Bus input. The module operates by sensing the voltage on the MPX bus input. As the switch is depressed (In or Out direction) each function sends a different load to the module which in turn interprets the direction of travel. The Current Adjust is used to prevent damaging the motors or opening of the fuse or circuit breaker for the slide-out unit. If the current exceeds a preset level, the module shuts off. To restart the motor, press the switch in the another direction.Features & Benefits Designed To Control The Operation Of A Slide Out Room Electrical Mechanism To Operate The Room, The Owner Would Simply Press And Hold The Button In The Desired Direction When The Slide Out Reaches It's Outer Most Limit, The Unit Will Sense The Rise In Current And Switch Off The Power To The Slide Out Motor To Move The Room Back In Again, The Owner Will Press And Hold The Button In The Desired Direction When The Slide Out Reaches It's Inner Most Position, The Controller Will Sense The Rise In Current And Will Shut Off Power To The Motor Limited 90 Day Warranty 14270363 1.0100lbs 0.00 0.00 0.00

Intellitec

176.4500 2025-07-13 73 In Stock Intellitec Motor Control W/Voice Output Intellitec 00 00971 100

Intellitec Motor Control W/Voice Output, Intellitec 00-00971-100

Brand Intellitec

Shop more from KEF

* Click "Add to Cart" to calculate shipping and delivery time.

Share & Earn 10% Cash Back Best Price in Bulk

Best Price in Bulk!

Because we are a major distributor for some products, we price very aggressively by sacrificing profit margin whenever we sell in bulk. The philosophy to offer quality products with little mark up has created unmatched customer loyalty for some successful membership based stores. Unlike those wholesale to public membership clubs, we do not charge any membership fee. Some merchants offer FREE shipping, but when you buy quantity 10, you pay 10 times total. Essentially, you are paying 10 times on shipping. We don't think that is fair to you. Why? Most of the time, shipping a 10 lb parcel does not cost 10 times of a 1 lb parcel.

Here is an example:

Opentip	Others
Product Price: $8	Product Price: $20
Shipping for quantity 1: $12	Shipping: FREE
Quantity: 10	Quantity: 10
Total Shipping for quantity 10: $18	Total Shipping: FREE
Subtotal: $98 Saving: $102 (51%)	Subtotal: $200

Don't be shy. If you discover any competitor outselling us in a particular product, whenever you purchase in large quantity, please bring it to our attention. Most of the time, we will match or beat their price, and give you a credit. If we lose to a competitor, it is our shame. We then know we need to work harder in sourcing to create values for you.

* Price comparison must be based on comparable brands or models and in bulk quantity purchase.

Optional related products

Intellitec Slideout Room W/Memory, Intellitec 00-00346-100

$170.84

Intellitec B.I.R.D. Gas W/Low Threshold, Intellitec 00-00362-100

$166.91

Intellitec Monoplex 10A Water Pump Ctl, Intellitec 00-00145-100

$62.42

Intellitec Slide Out Ctl Model 310, Intellitec 00-00525-310

$294.24

Intellitec Ecc Master 9K/10K Hi Eff A/C'S, Intellitec 00-00591-200

$264.50

Intellitec Isolator Relay Delay/Relay, Intellitec 00-00629-120

$86.20

Intellitec Automatic Energy Selector Sw, Intellitec 00-00714-000

$160.50

Intellitec 2004 50A Smart Ems Upgrade Kit 760, Intellitec 00-00894-200

$505.24

Intellitec 50A Smart Ems Upgrade Kit Mdl 960, Intellitec 00-00894-700

$523.07

Intellitec 50A Smart Ems Monitor Panel - Blk, Intellitec 00-00903-150

$237.76

Intellitec Relay Assembly Bd W/O Fuse Terms, Intellitec 01-00055-002

$92.14

Intellitec Relay-Battery Disconnect-12V/100Amp, Intellitec...

$98.08

Clean Seal .675 X 1.00 Clip-On W/Sid, Clean Seal G7056-50

$111.38

Exposed Rack 18In Pin W Holes, Exposed Racks 8-00-9818

$57.46

Product Description

Manufacturer Part Number: 0000971100

Slide Out Control Module; Use With Intellitec Monoplex ™ System; Motor Control With Voice Output; 10 To 16 Volt Dc/ 10 To 35 Amp

Attributes

Compatibility: Intellitec Monoplex ™ System

Product Description

These controllers are designed to control the operation of a slide out room electrical mechanism. To operate the room, the owner would simply press and hold the button in the desired direction(In or Out). With the jumper in the default setting, there is delay in operation of the slide-out to allow for a voice announcement that the slide-out is in motion. The motion of the slide-out may be stopped at any time by releasing the button. When the slide out reaches it's outer most limit, the unit will sense the rise in current and switch off the power to the slide out motor. To move the room back in again, the owner will press and hold the button in the desired direction. Again, there is a short delay in operation of the slide- out to allow for a voice announcement that the slide- out is in motion. When the slide out reaches it's inner most position, the controller will sense the rise in current and will shut off power to the motor. Direction control is accomplished by using the rocker switch terminated at the MPX Bus input. The module operates by sensing the voltage on the MPX bus input. As the switch is depressed (In or Out direction) each function sends a different load to the module which in turn interprets the direction of travel. The Current Adjust is used to prevent damaging the motors or opening of the fuse or circuit breaker for the slide-out unit. If the current exceeds a preset level, the module shuts off. To restart the motor, press the switch in the another direction.

Features & Benefits

Designed To Control The Operation Of A Slide Out Room Electrical Mechanism
To Operate The Room, The Owner Would Simply Press And Hold The Button In The Desired Direction
When The Slide Out Reaches It's Outer Most Limit, The Unit Will Sense The Rise In Current And Switch Off The Power To The Slide Out Motor
To Move The Room Back In Again, The Owner Will Press And Hold The Button In The Desired Direction
When The Slide Out Reaches It's Inner Most Position, The Controller Will Sense The Rise In Current And Will Shut Off Power To The Motor
Limited 90 Day Warranty

Attention CA Residents: Prop 65 Warning

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.