5 out of 5
Customer Reviews
By
Logan H.
Date: June 07, 2021
Perfect little set for work or home when you have a broken bolt just make sure you center punch the broken bolt so your drill bit doesnt walk
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By
Jason R.
Date: May 29, 2021
Great set
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
RichB
Date: May 04, 2021
Great set
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Don
Date: May 03, 2021
We've all been there when the screwdriver slips and you chew up those threads a little too much and then you're stuck wondering how to get that sucker out.This set won't get every screw out, but its gotten a lot out for me. You still need a pretty good head on the thing for this to work. If you completely snap off the head this probably ain't going to help you any unless its a fat screw that you can get some grip on what's left of the shaft.I've used some of the bits on probably a dozen screws of different sizes each and the bits are still in good condition with minimal wear so they durability is good also.This is that insurance that you hope you won't need, but if you do need it, you don't want to have to wait to get one of these mid-project.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
John B.
Date: April 29, 2021
I use this set when removing broken bolts. It comes with left handed drills and some times just using the drill bit removes broken bolts as drill bits are left handed
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Emmett Cook
Date: April 29, 2021
I bought this set to remove some broken water pump bolts in a VW Toureg which it was unsuccessful at. But im a mobile mechanic and in the months since I bought the set I've used it multiple times and had great luck with the left handed drill bits. They cut really well and with a little heat and some drilling, broken bolts pretty much spin right out.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: April 09, 2021
The bits continuously snapped off inside autobody steel. So now I'm trying to drill out carbide on top of the bolt stuck inside.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Jesse39;sGirl
Date: March 31, 2021
Not sure how to rate this product as I did eventually Snap it off in the spark plug hole. In it's defense, I absolutely hammered down on the torque and broke it but it never did grip that well either. I did have to hammer it in to get it to really bite down but eventually I had to just replace the entire cylinder head.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
outofethers
Date: March 29, 2021
The two smaller drill bits snapped before I could even drill far enough to use the extractors. Needless to say, a friend brought over his set and was able to help me out with extracting the 2 snapped water pump bolts I bought this kit for.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: March 29, 2021
I haven't needed to use the yet
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Allen-III
Date: March 07, 2021
I've used these a few dozen times now, mostly on stripped-out Philips head screws with good results. The spiral flutes are deep and sharp compared to some other types, so they bite rather well. The left-hand drill bits really help too, I had a few screws come out with those alone.For best results learn how to use these correctly! I've seen them used wrongly with bad outcomes. Start with a smaller extractor first (you can maybe go bigger after), drill into the head of the screw with the LH bit, lightly tap the extractor into the hole with a hammer till it bites, then turn left with a good tap wrench. BTW, you should have put some good penetrating oil on the screw before doing anything else.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Kelvin S.
Date: February 22, 2021
I bought this set to remove a stripped 3/32 set screw that held the bathroom faucet handle in place. It was very easy to use. Simply use the provided drill bit to drill into the set screw. Then gently tap the extractor with a hammer to get a bite into the stripped set screw. Attach the drill to the extractor and screw out the set screw. Stripped screws are no fun but having this extractor set will prevent anxiety the next time I encounter stripped screws.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Sylvain Lalime
Date: February 19, 2021
Works great, so far ! Time will tell how durable that extractor kit is, but I'm more than happy with it, for now !
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
mjo41232
Date: February 15, 2021
Did exactly as it should. All my drills in my kit were left handed and the extractors all seemed clean and in good shape. Love the metal container it comes with as well.Used to pull a broken valve cover bolt out of my engine.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
steve
Date: February 14, 2021
I bought this set to have in my toolbox because when you need a reverse drill bit, you need it now! The day came when I needed it and it failed miserably. I had a head bolt break off in a briggs and stratton V twin engine. The bolt was made of surprisingly soft steel. I drilled a pilot hole with a small bit that was sharp worked well. I used the next size up to enlarge the hole and the tip broke off about a 1/2 inch in. Game over. I had a similar set from snap-on tools that served me well for 25 years but over time the bits just wore out from lots of use but I never had a bit break off in all that time. I would return this product but apparently I've had it too long so not an option. I've use Irwin drills and taps in the past and have been pleased. They cost more but the quality was worth it ! So much for buying tools in advance so to be prepared.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
DanDaMan
Date: February 10, 2021
Pretty disappointed in this set. The drill bits will snap very easily, the extractor do not dig in well and if by chance one does it will snap once some torque is applied to it.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: January 23, 2021
Worked like a charm. Used a torch to heat up the plug in the head for 5-10 minutes, I'd been soaking it with penetrating oil for a week or so as well. Hammered this in with and extension and used a breaker bar to get it out.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: January 22, 2021
Works great
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Andrea Do
Date: January 21, 2021
The extractors worked great. They are the only thing that worked as they were supposed to. I bought this to remove a broken exhaust manifold bolt and the drill bits had the most difficult time drilling. Not only that, one of them broke. I ended up using a combination of previously owned drill bits and a larger extractor to make it work for me.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Adolis
Date: January 05, 2021
High quality bits. YOU MUST OIL DRILL BITS FREQUENTLY in order to keep them sharp. I dip my drill bits every 10 seconds of drilling. Had to remove a broken fastener in tight spot under the motor. Had to use flexible drill extender cause there was no space to fit in the drill. And with a little bit of patience managed to get that broken bolt out. Saved myself a bunch of money.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]