5 out of 5
Customer Reviews
By
Quiet
Date: September 23, 2021
Old rusted Subaru brake lines were rusted. Bolts rusted and rounded off. This little thing grabbed and with some muscle got the job done. Life Saver
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By
Lindsey
Date: September 20, 2021
Nearly stripped by brake line nuts even using a flare nut wrench and some heat and penetrating oil. Did what it was supposed to, very quickly and easily. I wish I could find other uses for it but seems that my regular channel locks do just about everything else.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
R. H. Amundson
Date: September 06, 2021
I ran into the dreaded frozen brake fitting on a 1977 Datsun 4 decades ago. Since then, I'v spent many hours breaking them off, breaking off easy outs, setting calipers on fire, drilling into the caliper off axis and replacing it. I'd been dreading having to replace the brake lines on an old Ranger, and someone suggested I try this tool. I sprayed the fitting with Kroil, clamped this on, and it turned the rusted fitting out in under a minute. Don't let the small size fool you. Its tiny so you can fit it into small spaces like surround most brake fittings. It has enough leverage to turn what was often a all day job into cakewalk. This is an awesome tool.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Luis
Date: September 03, 2021
Mechanic
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Spyder Lake
Date: September 02, 2021
The Vise Grip 10LW is the single tool I would carry on a tractor if I was limited to just one. No toolbox needed. Just clamp it on something round or hex shaped. It clamps securely on all round or hex shapes from 5/8 to 1-5/8 inch without marring, and will deliver extremely high torque to hex fasteners without slipping. Hold chisels or punches to keep your hand safe. Clamp it on a big bolt to make a hammer. Establish a temporary collar anyplace on a shaft without marring. Provide a steady rest point for something unwieldy that you must carry. Use the serrated tip of the jaw for small stuff. No worker on mechanics should be without one - even if youre not limited to one tool. ;)
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Ralph 68
Date: August 15, 2021
I have the many problems with the brakes on older cars is it to Remove flair nuts on the Master cylinder or the wheel cylinders the calipers this tool works nicely and with a little rocking back and forth action you can actually remove the nut. it's a great time saver
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
macaroni420
Date: August 12, 2021
I had to run all new brake lines on a 2008 Nissan Xterra. I used a standard vise grips and a torch to get all the stuck tube nuts off. That worked for all but three, where I could not use the torch. This wrench broke them all free on the first try, and saved me a lot of time. I only wish I would have known about this tool before I spent all that time removing the other ones with a torch and standard vise grips. I would highly recommend this for any brake job.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
timmwood
Date: August 04, 2021
This small tool will grip a nut without rounding off the edges. That's very convenient when you must hold a bolt in place while screwing another bolt. It's simple, but works great.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Kenneth
Date: July 31, 2021
This product is perfect for my splicing and activation job. I cannot perform without it!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Kevin Talbot
Date: June 25, 2021
These are vice grips that will grip 3 flat sides of a hex bolt. If you manage to have one that rounds over or is particularly stubborn, latch this bad boy on it and it will either shear the bolt or unscrew. Super handy for brake line or bleeder valves that are brass and can be easily rounded by wrenches.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Gordon Scott
Date: June 24, 2021
These vise grip pliers arrived amazingly quickly all the way to New Zealand. I have not yet used them for their intended purpose - removal of soft brass brake line nuts, but I believe that they will work well.I would highly recommend this supplier.I can't rate their sturdiness yet.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Mike M
Date: June 07, 2021
They do a good job holding a nut without Marring it also hold round stock without teeth marks. I'm a big fan of vise grips for the right Job
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
notsofunny
Date: June 06, 2021
Not a knock off. Absolute go to for stubborn nuts.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
notsofunny
Date: June 06, 2021
Not a knock off. Absolute go to for stubborn nuts.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
dariomac13
Date: June 05, 2021
mine still made in the usa
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
LMH
Date: May 14, 2021
Super Small
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Baibat
Date: May 11, 2021
Work well, great for vehicle restoration work
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Baibat
Date: May 11, 2021
Great for restoration work, good value now an essential tool
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Gerardo Flores
Date: April 29, 2021
G8 tool
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Gerardo Flores
Date: April 29, 2021
G8 quality
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]