Product Specs | |
Vendor | Allegion |
Manufacturer | LCN |
SKU | 4040XP-CUSH RH 689 MC SRI |
UID | LCN4040XPCUSHRHALMCSRI |
Grade | Grade 1 |
Installation | Commercial |
Origin | USA |
Unit of Measure | Each |
Application | Cush Arm |
Base Material | Varies |
UL Listing Type | UL 10C |
ANSI Number | A156.4 |
BAA Qualified | Yes |
Limited Warranty | 30 Years |
Fire Rated | 3 Hours {A} |
ADA Compliance | Yes |
Finish | |
Finish | |
Finish Description | Aluminum Painted |
Finish Family | Matte Silver |
Technical Specs | |
Type | Surface |
Technology | Hydraulic |
Mounting Location | Push Side |
Mounting Style | Parallel Arm |
Hold Open | No |
Closer Size | 1 to 6 |
Arm Type | Parallel Arm Dead Stop |
Hand | Right Hand |
Degree Swing | 110 Deg. |
Stop | Dead Stop |
Back Check | Adjustable |
Delay | No |
Cover | Metal |
Screw Type | Self Tapping |
Through Bolts | No |
Special Rust Inhibitor | Yes |
Cold Weather Fluid | Yes |
Product Type | Surface Closers |
Dimensions | |
Product | |
Product Length | 12" |
Product Width | 2.25" |
Product Height | 3.75" |
Package | |
Package Length | 16" |
Package Width | 4.25" |
Package Height | 5.75" |
Package Volume | 391.00 |
Package Qty | 1 |
Ship Weight | 14 lbs. |
Case | |
Case Length | 16.5" |
Case Width | 12.5" |
Case Height | 9.25" |
Case Volume | 1907.81 |
Case Qty | 4 |
Certifications | Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy American Act |
Body Construction | Cast Iron Body; Full Complement Bearings; 1-1/2" Diameter Piston; 3/4" Diameter Double Heat Treated; Pinion Journal |
Fluid | All Weather Liquid X Fluid |
Handing | Non-Handed |
Templating | Peel-n-Stick templates - 2-1/4" x 5" Mounting Hole Pattern |
Size | Adjustable Spring Size 1-6, includes Patented Green Dial |
Warranty | 30 years |
Cover | Plastic, Standard; Metal, Optional |
Fasteners | Self Reaming and Tapping Screws (SRT) |
Mounting | Hinge (Pull Side), Top Jamb (Push Side), Parallel Arm (Push Side) |
Arms | Regular Arm |
Finishes/Colors/ Powder Coat | Aluminum (689); Statuary Bronze (690); Light Bronze (691); Black (693); Dark Bronze (695); Brass (696); Custom colors optional; Optional SRI primer - powder coat only n Optional plated finishes |
Butt Hinges | Should not exceed 5" (127 mm) in width |
Auxiliary Stop | Recommended at hold-open point or where a door cannot swing beyond 120° |
Top Rail |
|
Head Frame | Less than 3-1/2" (89 mm) requires PLATE, 4040XP-18TJ; With flush ceiling, use PLATE, 4040XP-18G. Either plate requires 1-3/4" (44 mm) minimum |
Maximum Opening | Templating allows up to 120°; Hold-open points 85° up to 120° with hold-open arm. |
Delayed Action | Incorporates standard 4041 cylinder, without XP cylinder; Delays closing from 120° to 70°; Delay time adjustable up to approximately 1 minute |
Clearance | 4040XP-62EDA is 5-1/2" (140 mm) from door face. 6" (152 mm) for CUSH |
Head Frame | Flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4040XP-419 |
CUSH ARM | Requires SHOE SUPPORT, 4040XP-30 for fifth screw anchorage where reveal is less than 3-1/16 ? (78 mm) |
Delayed Action |
|
Attention CA Residents: Prop 65 Warning