5 out of 5
Laing 74427 Circulation Pump, Laing, E5 Series, SilentFlo 5000, 115/230V, 6GPM, 3/4"HB
* Click "Add to Cart" to calculate shipping and delivery time.
Product Description
Manufacturer Part Number: 74427
Circulation Pump, Laing, E5 Series, SilentFlo 5000, 115/230V, 6GPM, 3/4"HB
Laing E5 Spa Pump 1 Speed 115/230V 3/4" Barb 74427
Do more with less
E5 Circulation pump by Laing. The smaller pump of the E series, this pump has the ability to be controlled by a built-in temperature sensor or have a variable speed control. Options include a PWM controller and a plug-in timer for additional energy savings. This pump has 3/4" hose barb plumbing connection and can run 115V or 230V.
Features
**Pump & motor manufacturers reserve the right to change motors on pumps or style of motor without notice. Motors shown may differ from current stocked product. Functionality remains the same**
Circulation Pump, Laing, E5 Series, SilentFlo 5000, 115/230V, 6GPM, 3/4"HB
Laing E5 Spa Pump 1 Speed 115/230V 3/4" Barb 74427
Do more with less
E5 Circulation pump by Laing. The smaller pump of the E series, this pump has the ability to be controlled by a built-in temperature sensor or have a variable speed control. Options include a PWM controller and a plug-in timer for additional energy savings. This pump has 3/4" hose barb plumbing connection and can run 115V or 230V.
Features
- 3/4" Hose Barb Fittings for Pump Intake and Discharge
- Includes 4' power cord and Mounting Bracket.
- Domestic or international (Export) 50/60Hz
- Fits well in most spas.
- Lightweight and compact
- Resistant to Clogging
**Pump & motor manufacturers reserve the right to change motors on pumps or style of motor without notice. Motors shown may differ from current stocked product. Functionality remains the same**
Additional Information
| Cord Type | Blank |
| Voltage | 115/230 |
| Discharge Location | Side |
| Discharge Size | 3/4" Barb |
| Number of Speeds | 1 |
| Frequency (Hz) | 50/60 |
| High Speed (Amp) | 0.95 |
| Cable Length | 4' |
Alternate Part Numbers
Available Documentation
- 01-00-0222
- 6080C5031
- HQ100102
- 10-0102-K
- SM303NH-3/4
- 9406
- 341581000
- Sm-303-nh
- E5-NCHNNNN3W-10
- 1-00-0222
- 1-00-0222A 74416
- 6080C5031
- 10-0127
- E5 Silent Flo 5000
- 37949
- 301392G
- E5-NSHNNN1W14
- 34-158-1252
- SM303ROTOR
| Title |
|---|
| Specifications |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Specifications
| Compatible With | Laing |
Product Warranty
This item has one year warranty.
Return Policy
All SAD- items are non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By Shannon
Date: June 09, 2023
Order this to replace for my hot tub. It is smaller but works beautifully. Easy to install!!
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Larry S.
Date: June 02, 2023
Flow rate is too slow
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By john
Date: May 24, 2023
Spa
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By michael brown
Date: December 24, 2022
Pump itself is fine however seller did not include wiring clips, so installation was a pain. trying to install to computer board without clips is impossible. had to us old pump clips and they wouldn't stay attached. Understand they cost pennies but non electricians don't have them laying around much less the tools to secure them to wire. This would have been 5 stars if they didn't cheap out on clips, I would have happily paid the extra quarter for them installed. Every other pump I have replaced had them. I have had tub for 22 years, and I've replaced at least 6 pumps.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By Shane
Date: November 10, 2022
Product worked great
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Cathy Garner
Date: October 29, 2022
We ordered this pump because it is the recommended replacement model for our Hot Springs spa. I ordered a replacement pump on an older Hot Springs spa about 5 years ago, and received a pump the same physical size and wattage as the original. That replacement job went quickly.Not so with this pump. At first I thought the wrong pump had been delivered, because it is significantly smaller than the original. But this model pump is indeed the factory recommended replacement pump. It was even manufactured in the same factory in Hungary as the original.The main issue is that it is necessary to add a longer hose to the intake (the connection at the center of the end of the pump). This is the easiest way to adjust for the physically smaller size of this pump. To replace the hose, you either need to drain the spa, or get a friend to hold their fingers over the hose and pump openings while you connect the hoses and position the clamps. It's pretty hard to do that with just two hands.Another issue is that the rated power for this pump is less than the original. Is it more efficient, pumping the same volume on less power? Maybe, but the pumps do not specify flow rate and power in the same terms so it is very difficult to compare by the specs. The same temperature setting on the heater produces the same water temperature, but that's another indirect indicator.The new pump has been working fine for a month. The first pump worked fine for 15 years. I guess we'll find out in 10-15 years whether this smaller, lower-power pump lasts as long as the original.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]