skip to footer block
CED Lava P HLV RA S ¼" Plug Lava Low Profile Solder Right Angle P13094906CED-P-HLV-RA-S https://cdnimages.opentip.com/full/CED/CED-P-HLV-RA-S.jpg Lava P HLV RA S ¼" Plug Lava Low Profile Solder Right Angle Manufacturer Part Number: P-HLV-RA-SHigh quality made in USA ¼\" plugs from Lava Cable. This right angle plug features an ultra low profile and a unique soldered connection that provides a quicker assembly than standard soldered connectors. The insulation system used in the plugs ensures a solid connection that is nearly impossible to short.Lava Soldered Right Angle Connectors are the smallest profile soldered plugs on the market today at only .405\" in width and .515\" in outer diameter. Soldering is easy with just one small solder point. Included insulators prevent shorting.To assemble:Strip 0.75\" of the outside jacket from the end of the instrument cable.Feed the stripped end including the shield braid through the large black plastic insulator tube. The U-shaped cutout should face away from the end that will be soldered.Fold the shield braid back and flushly spread it over the large plastic insulator.Strip ?\" of the inside insulator from the cable. If the cable has a conductive layer on the inner insulator be sure to strip this away at least ¼\" from the inner copper conductor.Solder the end of the cable to the cup on the small metal connector. The side to be soldered looks like a cross section of a tube.Slide the small plastic insulator tube over the metal end until it reaches the larger plastic tube. This tube will only fit when oriented correctly. The tip of the metal connector will slightly poke through the other end of the small tube.Slide the open end of the ¼\" plug end over the small plastic tube. When fully inserted, it will lightly snap into place.Fold the cable over into the U-shaped cutout slot of the large plastic insulator tube.Line up the end cap with the ¼\" plug. The folded cable will fit into the cutout of the cap.Hold the cap in place and thread the ¼\" end onto the cap.Measurements and Specs Diameter0.515 in. End Length0.405 in. Length1.6125 in. Packaging Dimensions1.45 in. × 1.135 in. × 0.35 in. Weight (Packaging)0.022 lbs. 13094906 841358115370 0.0200lbs 0.00 0.00 0.00
Lava
8.9100 2025-07-11 In Stock
  »  
  »  
  »  
  »  

Lava P-HLV-RA-S ¼" Plug - Lava, Low Profile, Solder, Right Angle

Brand Lava
Shop more from CED
UPC: 841358115370
SKU: CED-P-HLV-RA-S
Price: $8.91
Quantity:
In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: P-HLV-RA-S

High quality made in USA ¼" plugs from Lava Cable. This right angle plug features an ultra low profile and a unique soldered connection that provides a quicker assembly than standard soldered connectors. The insulation system used in the plugs ensures a solid connection that is nearly impossible to short.

Lava Soldered Right Angle Connectors are the smallest profile soldered plugs on the market today at only .405" in width and .515" in outer diameter. Soldering is easy with just one small solder point. Included insulators prevent shorting.

To assemble:

  • Strip 0.75" of the outside jacket from the end of the instrument cable.
  • Feed the stripped end including the shield braid through the large black plastic insulator tube. The U-shaped cutout should face away from the end that will be soldered.
  • Fold the shield braid back and flushly spread it over the large plastic insulator.
  • Strip ?" of the inside insulator from the cable. If the cable has a conductive layer on the inner insulator be sure to strip this away at least ¼" from the inner copper conductor.
  • Solder the end of the cable to the cup on the small metal connector. The side to be soldered looks like a cross section of a tube.
  • Slide the small plastic insulator tube over the metal end until it reaches the larger plastic tube. This tube will only fit when oriented correctly. The tip of the metal connector will slightly poke through the other end of the small tube.
  • Slide the open end of the ¼" plug end over the small plastic tube. When fully inserted, it will lightly snap into place.
  • Fold the cable over into the U-shaped cutout slot of the large plastic insulator tube.
  • Line up the end cap with the ¼" plug. The folded cable will fit into the cutout of the cap.
  • Hold the cap in place and thread the ¼" end onto the cap.


Measurements and Specs


warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
0 reviews
Be the first to review this item!
Write a Review