Great Tool Saved Me Time.

Fits 97 Cadillac DeVille Northstar 4.6This tool actually has the pointed tip. That helps get under the hold down tab inside the water pump housing, I borrowed one from AutoZone for $35 that didn't have the pointed and. It only worked halfway. This was much better.Coding did Chip and peel after the first use. Might lead to resting. But I may never need it again.

Fits 97 Cadillac DeVille Northstar 4.6This tool actually has the pointed tip. That helps get under the hold down tab inside the water pump housing, I borrowed one from AutoZone for $35 that didn't have the pointed and. It only worked halfway. This was much better.Coding did Chip and peel after the first use. Might lead to resting. But I may never need it again.

Probably only use it once but it's worth the price.

Not the type of product that necessitates a wordy review. Purchased this to replace a water pump. It worked well.

Water pump was seized up and couldn't get it to budge. Had to rent a heavy duty one from auto zone for $60. Just rent the tool.

It just needs to have the way to use it right. Because when you get it you will try to take the pump out the wrong way and mass up the pump.

WORK GREAT

Works good

Recently purchased this to replace a rattling/leaking water pump in my 2004 Cadillac Deville.The product works exactly as it is intended and is a snap to use once you get the hang of it. I recommend trying to attach it to your replacement pump so you get an idea of how it is applied to the bad pump in your vehicle. That way, you will see how it locks in to the pump you're taking out. That helped me; otherwise, I may have not had it on squarely. There are other pump wrenches that have a bracket that attaches to the pump housing that squares up the wrench, but I didn't opt because of the additional expense.YouTube videos show guys using a breaker bar to remove and reinstall the pump, but I think that is overkill. It makes the wrench that much more unwieldy to lock in. My Craftsman 1/2 socket did the trick just fine. A little grease on the O-ring is helpful to get it to seat into its little channel. 10/10!

The thickness is a little bit too much. However, it did the job.

It really works thanks.

did the job.

Worked great for a 4.6L Northstar in a 98 Eldorado.